Re: [PATCH] PCI: Add Max Payload Size quirk for ASMedia ASM1062 SATA controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 17, 2021 at 11:55:44PM +0100, Pali Rohár wrote:
> On Wednesday 17 March 2021 17:45:49 Bjorn Helgaas wrote:
> > [+cc Zachary, author of 8a3ebd8de328]
> > 
> > Thanks for the report and the patch, Marek!
> > 
> > On Wed, Mar 17, 2021 at 12:59:24PM +0100, Marek Behún wrote:
> > > The ASMedia ASM1062 SATA controller causes an External Abort on
> > > controllers which support Max Payload Size >= 512. It happens with
> > > Aardvark PCIe controller (tested on Turris MOX) and also with DesignWare
> > > controller (armada8k, tested on CN9130-CRB):
> > > 
> > >   ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > >   ata1.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
> > >   ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
> > >   ERROR:   Unhandled External Abort received on 0x80000000 at EL3!
> > >   ERROR:    exception reason=1 syndrome=0x92000210
> > >   PANIC at PC : 0x00000000040273bc
> > > 
> > > Limiting Max Payload Size to 256 bytes solves this problem.
> > > 
> > > On Turris MOX this problem first appeared when the pci-aardvark
> > > controller started using the pci-emul-bridge API, in commit 8a3ebd8de328
> > > ("PCI: aardvark: Implement emulated root PCI bridge config space").
> > 
> > Any ideas about why 8a3ebd8de328 made a difference?  Could there be a
> > defect in 8a3ebd8de328?  Or maybe before 8a3ebd8de328 we didn't
> > actually read or update MPS settings in the hardware?
> 
> Hi Bjorn! It is because A3720 HW does not have real PCIe Root Bridge and
> therefore kernel was not able to read nor write MPS settings.
> 
> Commit 8a3ebd8de328 added support for emulated PCIe Root Bridge on A3720
> and aardvark driver started emulating it via internal aardvark registers
> which supports reading and writing also MPS settings. So kernel was
> finally able to set 512 byte payload.

OK, so in other words, before 8a3ebd8de328 we didn't actually read or
update MPS settings in the hardware.

> And so after this commit kernel was able to set MPS and due to that
> ASMedia bug system started crashing.
> 
> > > On armada8k this was always a problem because it has HW root bridge.
> > 
> > Can you please open a report at bugzilla.kernel.org and attach the
> > complete "sudo lspci -vv" output for both systems?  I think it's OK to
> > collect these with the patch applied; we should still be able to see
> > the information we use to compute the MPS values.  But please include
> > the CONFIG_PCIE_BUS_* settings and any "pcie_bus_*" kernel command
> > line arguments.
> > 
> > This quirk suggests that there's a hardware defect in the ASMedia
> > ASM1062.  But if that's really the case, we should see reports on lots
> > of platforms, and I'm only aware of these two.
> 
> Do you have platform which support MPS of 512 bytes? Because I have not
> seen any x86 / Intel PCIe controller with such support on ordinary
> laptop and desktop.
> 
> These two (A3720 and CN9130) are the only which has support for it.
> 
> Has somebody else PCIe controller which Root Bridge supports MPS of 512
> bytes?
> 
> Maybe they are in servers, but then such "cheap" SATA controllers are
> not used in servers. So this is probably reason why nobody else reported
> such issue.

I have no idea.  My laptop only supports 512 (except for an ASMedia
USB controller).  If the device advertises it, I would expect the
vendor to test it.  Obviously it still could be a device defect.  They
should publish an erratum if that's the case so people know to avoid
it.  So I would try to get ASMedia to say "no, that's tested and
should work" or "oh, sorry, here's an erratum and we'll fix it in the
next round."

> > You do mention that it
> > was always a problem on armada8k; if you know of other reports of
> > that, please include URLs in the bugzilla.
> > 
> > If the problem only occurs on these platforms, my first guess would be
> > a hardware defect in these platforms or a software defect in the PCIe
> > controller driver.  It wouldn't surprise me if we have a generic PCI
> > core defect in how we set MPS, either.
> > 
> > > Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
> > > Reported-by: Rötti <espressobinboardarmbiantempmailaddress@xxxxxxxxx>
> > > Cc: Pali Rohár <pali@xxxxxxxxxx>
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > ---
> > >  drivers/pci/quirks.c | 5 +++++
> > >  1 file changed, 5 insertions(+)
> > > 
> > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > > index 653660e3ba9e..a561136efb08 100644
> > > --- a/drivers/pci/quirks.c
> > > +++ b/drivers/pci/quirks.c
> > > @@ -3251,6 +3251,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
> > >  			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
> > >  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
> > >  			 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
> > > +/*
> > > + * For some reason DECLARE_PCI_FIXUP_HEADER does not work with pci-aardvark
> > > + * controller. We have to use DECLARE_PCI_FIXUP_EARLY.
> > > + */
> > 
> > This is curious, too.  If we need the quirk, I'd like to run this down
> > to figure out why we need an EARLY instead of HEADER quirk.
> > Differences like that suggest a bug elsewhere, or at least an
> > unnecessary difference between PCIe controller drivers.
> > 
> > > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ASMEDIA, 0x0612, fixup_mpss_256);
> > >  
> > >  /*
> > >   * Intel 5000 and 5100 Memory controllers have an erratum with read completion
> > > -- 
> > > 2.26.2
> > > 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux