On Wed, 17 Mar 2021 20:24:24 +0100
Pali Rohár <pali@xxxxxxxxxx> wrote:
> On Wednesday 17 March 2021 13:15:36 Alex Williamson wrote:
> > On Wed, 17 Mar 2021 20:02:06 +0100
> > Pali Rohár <pali@xxxxxxxxxx> wrote:
> >
> > > On Monday 15 March 2021 09:03:39 Alex Williamson wrote:
> > > > On Mon, 15 Mar 2021 15:52:38 +0100
> > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > >
> > > > > On Monday 15 March 2021 08:34:09 Alex Williamson wrote:
> > > > > > On Mon, 15 Mar 2021 14:52:26 +0100
> > > > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > > On Monday 15 March 2021 19:13:23 Amey Narkhede wrote:
> > > > > > > > slot reset (pci_dev_reset_slot_function) and secondary bus
> > > > > > > > reset(pci_parent_bus_reset) which I think are hot reset and
> > > > > > > > warm reset respectively.
> > > > > > >
> > > > > > > No. PCI secondary bus reset = PCIe Hot Reset. Slot reset is just another
> > > > > > > type of reset, which is currently implemented only for PCIe hot plug
> > > > > > > bridges and for PowerPC PowerNV platform and it just call PCI secondary
> > > > > > > bus reset with some other hook. PCIe Warm Reset does not have API in
> > > > > > > kernel and therefore drivers do not export this type of reset via any
> > > > > > > kernel function (yet).
> > > > > >
> > > > > > Warm reset is beyond the scope of this series, but could be implemented
> > > > > > in a compatible way to fit within the pci_reset_fn_methods[] array
> > > > > > defined here.
> > > > >
> > > > > Ok!
> > > > >
> > > > > > Note that with this series the resets available through
> > > > > > pci_reset_function() and the per device reset attribute is sysfs remain
> > > > > > exactly the same as they are currently. The bus and slot reset
> > > > > > methods used here are limited to devices where only a single function is
> > > > > > affected by the reset, therefore it is not like the patch you proposed
> > > > > > which performed a reset irrespective of the downstream devices. This
> > > > > > series only enables selection of the existing methods. Thanks,
> > > > > >
> > > > > > Alex
> > > > > >
> > > > >
> > > > > But with this patch series, there is still an issue with PCI secondary
> > > > > bus reset mechanism as exported sysfs attribute does not do that
> > > > > remove-reset-rescan procedure. As discussed in other thread, this reset
> > > > > let device in unconfigured / broken state.
> > > >
> > > > No, there's not:
> > > >
> > > > int pci_reset_function(struct pci_dev *dev)
> > > > {
> > > > int rc;
> > > >
> > > > if (!dev->reset_fn)
> > > > return -ENOTTY;
> > > >
> > > > pci_dev_lock(dev);
> > > > >>> pci_dev_save_and_disable(dev);
> > > >
> > > > rc = __pci_reset_function_locked(dev);
> > > >
> > > > >>> pci_dev_restore(dev);
> > > > pci_dev_unlock(dev);
> > > >
> > > > return rc;
> > > > }
> > > >
> > > > The remove/re-scan was discussed primarily because your patch performed
> > > > a bus reset regardless of what devices were affected by that reset and
> > > > it's difficult to manage the scope where multiple devices are affected.
> > > > Here, the bus and slot reset functions will fail unless the scope is
> > > > limited to the single device triggering this reset. Thanks,
> > > >
> > > > Alex
> > > >
> > >
> > > I was thinking a bit more about it and I'm really sure how it would
> > > behave with hotplugging PCIe bridge.
> > >
> > > On aardvark PCIe controller I have already tested that secondary bus
> > > reset bit is triggering Hot Reset event and then also Link Down event.
> > > These events are not handled by aardvark driver yet (needs to
> > > implemented into kernel's emulated root bridge code).
> > >
> > > But I'm not sure how it would behave on real HW PCIe hotplugging bridge.
> > > Kernel has already code which removes PCIe device if it changes presence
> > > bit (and inform via interrupt). And Link Down event triggers this
> > > change.
> >
> > This is the difference between slot and bus resets, the slot reset is
> > implemented by the hotplug controller and disables presence detection
> > around the bus reset. Thanks,
>
> Yes, but I'm talking about bus reset, not about slot reset.
>
> I mean: to use bus reset via sysfs on hardware which supports slots and
> hotplugging.
>
> And if I'm reading code correctly, this combination is allowed, right?
> Via these new patches it is possible to disable slot reset and enable
> bus reset.
That's true, a slot reset is simply a bus reset wrapped around code
that prevents the device from getting ejected. Maybe it would make
sense to combine the two as far as this interface is concerned, ie. a
single "bus" reset method that will always use slot reset when
available. Thanks,
Alex
