The Brcmstb PCIe RC uses a reset control "rescal" for certain chips. This reset implements a "pulse reset" so it matches more the reset/rearm calls instead of the deassert/assert calls. Also, add reset_control calls in suspend/resume functions. Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset") Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx> Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index e330e6811f0b..18f23cba7e3a 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -1148,6 +1148,7 @@ static int brcm_pcie_suspend(struct device *dev) brcm_pcie_turn_off(pcie); ret = brcm_phy_stop(pcie); + reset_control_rearm(pcie->rescal); clk_disable_unprepare(pcie->clk); return ret; @@ -1163,9 +1164,13 @@ static int brcm_pcie_resume(struct device *dev) base = pcie->base; clk_prepare_enable(pcie->clk); + ret = reset_control_reset(pcie->rescal); + if (ret) + goto err0; + ret = brcm_phy_start(pcie); if (ret) - goto err; + goto err1; /* Take bridge out of reset so we can access the SERDES reg */ pcie->bridge_sw_init_set(pcie, 0); @@ -1180,14 +1185,16 @@ static int brcm_pcie_resume(struct device *dev) ret = brcm_pcie_setup(pcie); if (ret) - goto err; + goto err1; if (pcie->msi) brcm_msi_set_regs(pcie->msi); return 0; -err: +err1: + reset_control_rearm(pcie->rescal); +err0: clk_disable_unprepare(pcie->clk); return ret; } @@ -1197,7 +1204,7 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie) brcm_msi_remove(pcie); brcm_pcie_turn_off(pcie); brcm_phy_stop(pcie); - reset_control_assert(pcie->rescal); + reset_control_rearm(pcie->rescal); clk_disable_unprepare(pcie->clk); } @@ -1278,13 +1285,13 @@ static int brcm_pcie_probe(struct platform_device *pdev) return PTR_ERR(pcie->perst_reset); } - ret = reset_control_deassert(pcie->rescal); + ret = reset_control_reset(pcie->rescal); if (ret) dev_err(&pdev->dev, "failed to deassert 'rescal'\n"); ret = brcm_phy_start(pcie); if (ret) { - reset_control_assert(pcie->rescal); + reset_control_rearm(pcie->rescal); clk_disable_unprepare(pcie->clk); return ret; } -- 2.17.1