Re: [PATCH net-next 1/4] PCI/VPD: Remove Chelsio T3 quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05.02.2021 13:42, Raju Rangoju wrote:
> On Tuesday, February 02/02/21, 2021 at 21:35:55 +0100, Heiner Kallweit wrote:
>> cxgb3 driver doesn't use the PCI core code for VPD access, it has its own
>> implementation. Therefore we don't need a quirk for it in the core code.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
>> ---
>>  drivers/pci/vpd.c | 13 ++++---------
>>  1 file changed, 4 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
>> index 7915d10f9..db86fe226 100644
>> --- a/drivers/pci/vpd.c
>> +++ b/drivers/pci/vpd.c
>> @@ -628,22 +628,17 @@ static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
>>  {
>>  	int chip = (dev->device & 0xf000) >> 12;
>>  	int func = (dev->device & 0x0f00) >>  8;
>> -	int prod = (dev->device & 0x00ff) >>  0;
>>  
>>  	/*
>> -	 * If this is a T3-based adapter, there's a 1KB VPD area at offset
>> -	 * 0xc00 which contains the preferred VPD values.  If this is a T4 or
>> -	 * later based adapter, the special VPD is at offset 0x400 for the
>> -	 * Physical Functions (the SR-IOV Virtual Functions have no VPD
>> -	 * Capabilities).  The PCI VPD Access core routines will normally
>> +	 * If this is a T4 or later based adapter, the special VPD is at offset
>> +	 * 0x400 for the Physical Functions (the SR-IOV Virtual Functions have
>> +	 * no VPD Capabilities). The PCI VPD Access core routines will normally
>>  	 * compute the size of the VPD by parsing the VPD Data Structure at
>>  	 * offset 0x000.  This will result in silent failures when attempting
>>  	 * to accesses these other VPD areas which are beyond those computed
>>  	 * limits.
>>  	 */
>> -	if (chip == 0x0 && prod >= 0x20)
>> -		pci_set_vpd_size(dev, 8192);
> 
> The above quirk has been added by the following commit to fix VPD access
> issue in the guest VM. Wouldn't removing this quirk reopen the original
> issue?
> 

Indeed, I looked at cxgb3 and missed the problematic vfio-pci use case.
So let me remove patch 1 from the series.

> ----------------------------------------------------------
> commit 1c7de2b4ff886a45fbd2f4c3d4627e0f37a9dd77
> Author: Alexey Kardashevskiy <aik@xxxxxxxxx>
> Date:   Mon Oct 24 18:04:17 2016 +1100
> 
> PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
> 
> There is at least one Chelsio 10Gb card which uses VPD area to store 
> some non-standard blocks (example below).  However pci_vpd_size() returns the 
> length of the first block only assuming that there can be only one VPD "End 
> Tag".
> 
> Since 4e1a635552d3 ("vfio/pci: Use kernel VPD access functions"), VFIO
> blocks access beyond that offset, which prevents the guest "cxgb3" driver
> from probing the device.  The host system does not have this problem as its
> driver accesses the config space directly without pci_read_vpd().
> 
> Add a quirk to override the VPD size to a bigger value.  The maximum size
> is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h.
> We do not read the tag as the cxgb3 driver does as the driver supports
> writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes
> boundary.  The quirk is registered for all devices supported by the cxgb3
> driver.
> 
> This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3
> driver itself accesses VPD directly and the problem only exists with the
> vfio-pci driver (when cxgb3 is not running on the host and may not be even
> loaded) which blocks accesses beyond the first block of VPD data. However
> vfio-pci itself does not have quirks mechanism so we add it to PCI.
> 
> This is the controller:
> Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single
> Port Adapter [1425:0030]
> 
> This is what I parsed from its VPD:
> ===
>   b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809
>   FN\x0746K'
> 
>   0000 Large item 42 bytes; name 0x2 Identifier	String
> 	b'10 Gigabit Ethernet-SR PCI Express Adapter'
>     002d Large item 74	bytes; name 0x10
> 	#00 [EC] len=7:	b'D76809'
> 	#0a [FN] len=7:	b'46K7897'
> 	#14 [PN] len=7:	b'46K7897'
> 	#1e [MN] len=4:	b'1037'
> 	#25 [FC] len=4:	b'5769'
> 	#2c [SN] len=12: b'YL102035603V'
> 	#3b [NA] len=12: b'00145E992ED1'
>     007a Small item 1 bytes; name 0xf End Tag
>     0c00 Large item 16 bytes; name 0x2 Identifier String
> 	b'S310E-SR-X      '
>     0c13 Large item 234 bytes; name 0x10
> 	#00 [PN] len=16: b'TBD             '
> 	#13 [EC] len=16: b'110107730D2     '
> 	#26 [SN] len=16: b'97YL102035603V  '
> 	#39 [NA] len=12: b'00145E992ED1'
> 	#48 [V0] len=6: b'175000'
> 	#51 [V1] len=6: b'266666'
> 	#5a [V2] len=6: b'266666'
> 	#63 [V3] len=6: b'2000  '
> 	#6c [V4] len=2: b'1 '
> 	#71 [V5] len=6: b'c2    '
> 	#7a [V6] len=6: b'0     '
> 	#83 [V7] len=2: b'1 '
> 	#88 [V8] len=2: b'0 '
> 	#8d [V9] len=2: b'0 '
> 	#92 [VA] len=2: b'0 '
> 	#97 [RV] len=80:
> 	b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
>    0d00 Large item 252 bytes; name 0x11
> 	#00 [VC] len=16: b'122310_1222 dp  '
> 	#13 [VD] len=16: b'610-0001-00 H1\x00\x00'
> 	#26 [VE] len=16: b'122310_1353 fp  '
> 	#39 [VF] len=16: b'610-0001-00 H1\x00\x00'
> 	 #4c [RW] len=173:
> 	 b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
>    0dff Small item 0 bytes; name 0xf End Tag
> 
>    10f3 Large item 13315 bytes; name 0x62
>    !!! unknown item name 98:
>    b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00'
>    ===
> 
>    Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
>    Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> 
> ---------------------------------------------
> 
> 
>> -	else if (chip >= 0x4 && func < 0x8)
>> +	if (chip >= 0x4 && func < 0x8)
>>  		pci_set_vpd_size(dev, 2048);
>>  }
>>  
>> -- 
>> 2.30.0
>>
>>




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux