On 2021/2/5 0:10, Bjorn Helgaas wrote:
> [+cc Masahiro, Michal, linux-kbuild, linux-kernel]
>
> On Thu, Feb 04, 2021 at 07:30:15PM +0800, Yicong Yang wrote:
>> From: Junhao He <hejunhao2@xxxxxxxxxxxxx>
>>
>> Use subdir-ccflags-* instead of ccflags-* to inherit the debug
>> settings from Kconfig when traversing subdirectories.
>
> So I guess the current behavior is:
>
> If CONFIG_PCI_DEBUG=y, add -DDEBUG to CFLAGS in the current
> directory, but not in any subdirectories
>
> and the behavior after this patch is:
>
> If CONFIG_PCI_DEBUG=y, add -DDEBUG to CFLAGS in the current
> directory and any subdirectories
>
> Is that right? That makes sense to me. I wonder if any other places
> have this issue?
that's right. we didn't check other places, but some have individual config
in their sub-directory as you mentioned below.
>
> 'git grep "^ccflags.*-DDEBUG"' finds a few cases where subdirectories
> use their own debug config options, e.g.,
>
> drivers/i2c/Makefile:ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
> drivers/i2c/algos/Makefile:ccflags-$(CONFIG_I2C_DEBUG_ALGO) := -DDEBUG
> drivers/i2c/busses/Makefile:ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> drivers/i2c/muxes/Makefile:ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
>
> But some have subdirectories that look like they probably should be
> included by using subdir-ccflags, e.g.,
>
> drivers/base/Makefile:ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
> drivers/base/power/Makefile:ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
> # drivers/base/{firmware_loader,regmap,test}/ not included
>
> drivers/hwmon/Makefile:ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
> # drivers/hwmon/{occ,pmbus}/ not included
>
> drivers/pps/Makefile:ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
> drivers/pps/clients/Makefile:ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
> # drivers/pps/generators/ not included
>
> There are many more places that add -DDEBUG to ccflags-y that *don't*
> have subdirectories.
>
> I wonder the default should be that we use subdir-ccflags all the
> time, and use ccflags only when we actually want different
> CONFIG_*_DEBUG options for subdirectories.
agree. if there is no debug config in the sub-directory, the
config should be inherited from its parent directory using subdir-ccflags.
we can post a separate serial to issue other places.
Thanks,
Yicong
>
>> Signed-off-by: Junhao He <hejunhao2@xxxxxxxxxxxxx>
>> Signed-off-by: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
>> ---
>> drivers/pci/Makefile | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
>> index 11cc794..d62c4ac 100644
>> --- a/drivers/pci/Makefile
>> +++ b/drivers/pci/Makefile
>> @@ -36,4 +36,4 @@ obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
>> obj-y += controller/
>> obj-y += switch/
>>
>> -ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
>> +subdir-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
>> --
>> 2.8.1
>>
>
> .
>
