Convert the file into a DT schema. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- .../bindings/pci/hisilicon,kirin-pcie.yaml | 90 +++++++++++++++++++ .../devicetree/bindings/pci/kirin-pcie.txt | 50 ----------- MAINTAINERS | 2 +- 3 files changed, 91 insertions(+), 51 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml new file mode 100644 index 000000000000..46f9f3f25dbc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Kirin SoCs PCIe host DT description + +maintainers: + - Xiaowei Song <songxiaowei@xxxxxxxxxxxxx> + - Binghui Wang <wangbinghui@xxxxxxxxxxxxx> + +description: | + Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. + It shares common functions with the PCIe DesignWare core driver. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# +# - $ref: snps,pcie.yaml# + +properties: + compatible: + const: hisilicon,kirin960-pcie + + reg: + description: | + Should contain rc_dbi, apb, phy, config registers location and length. + + reg-names: + items: + - const: dbi # controller configuration registers + - const: apb # apb Ctrl register defined by Kirin + - const: phy # apb PHY register defined by Kirin + - const: config # PCIe configuration space registers + + reset-gpios: + description: The GPIO to generate PCIe PERST# assert and deassert signal. + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - reset-gpios + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/hi3660-clock.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xF4000000 0 0x2000>; + reg-names = "dbi","apb","phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy", + "pcie_apb_sys", "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt deleted file mode 100644 index a38f8e38a67b..000000000000 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ /dev/null @@ -1,50 +0,0 @@ -HiSilicon Kirin SoCs PCIe host DT description - -Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and -inherits common properties defined in -Documentation/devicetree/bindings/pci/snps,pcie.yaml. - -Additional properties are described here: - -Required properties -- compatible: - "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC -- reg: Should contain rc_dbi, apb, phy, config registers location and length. -- reg-names: Must include the following entries: - "dbi": controller configuration registers; - "apb": apb Ctrl register defined by Kirin; - "phy": apb PHY register defined by Kirin; - "config": PCIe configuration space registers. -- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. - -Optional properties: - -Example based on kirin960: - - pcie@f4000000 { - compatible = "hisilicon,kirin-pcie"; - reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>, - <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>; - reg-names = "dbi","apb","phy", "config"; - bus-range = <0x0 0x1>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>; - num-lanes = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>, - <0x0 0 0 2 &gic 0 0 0 283 4>, - <0x0 0 0 3 &gic 0 0 0 284 4>, - <0x0 0 0 4 &gic 0 0 0 285 4>; - clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, - <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, - <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, - <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, - <&crg_ctrl HI3660_ACLK_GATE_PCIE>; - clock-names = "pcie_phy_ref", "pcie_aux", - "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; - reset-gpios = <&gpio11 1 0 >; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 0bcba0d4994c..701d7115af74 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13817,7 +13817,7 @@ M: Xiaowei Song <songxiaowei@xxxxxxxxxxxxx> M: Binghui Wang <wangbinghui@xxxxxxxxxxxxx> L: linux-pci@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/pci/kirin-pcie.txt +F: Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml F: drivers/pci/controller/dwc/pcie-kirin.c PCIE DRIVER FOR HISILICON STB -- 2.29.2
