[PATCH v2 10/11] PCI: dwc: pcie-kirin: add support for clkreq GPIOs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The hardware on Kirin 970 designs use external components as part of
their PCIe hardware support.

Fo instance, in the case of HiKey 970, it has separate clkreq lines that
are needed to be enabled on its PCIe bridge, Ethernet chip and even at
the M.2 connector hardware.

Those should be enabled during PCIe hardware power on logic, as
otherwise the resource allocation will fail.

Add support for them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-kirin.c | 77 +++++++++++--------------
 1 file changed, 34 insertions(+), 43 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 4124c6ace349..c5404f1eca28 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -140,6 +140,8 @@
 #define TIME_PHY_PD_MAX		11
 
 #define MAX_GPIO_RESETS		4
+#define MAX_GPIO_CLKREQ		3
+
 struct kirin_pcie {
 	struct dw_pcie	*pci;
 	void __iomem	*apb_base;
@@ -153,9 +155,11 @@ struct kirin_pcie {
 	struct clk	*pcie_aclk;
 	struct clk	*pcie_aux_clk;
 	int		n_gpio_resets;
-	int		gpio_id_clkreq[3];
+	int		n_gpio_clkreq;
 	int		gpio_id_reset[MAX_GPIO_RESETS];
 	const char	*reset_names[MAX_GPIO_RESETS];
+	int		gpio_id_clkreq[MAX_GPIO_CLKREQ];
+	const char	*clkreq_names[MAX_GPIO_CLKREQ];
 	u32		eye_param[5];
 };
 
@@ -345,6 +349,24 @@ static long kirin_common_pcie_get_resource(struct kirin_pcie *kirin_pcie,
 			return -ENOMEM;
 	}
 
+	kirin_pcie->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
+	if (kirin_pcie->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
+		dev_err(dev, "Too many GPIO clock requests!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < kirin_pcie->n_gpio_clkreq; i++) {
+		kirin_pcie->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
+							    "clkreq-gpios", i);
+		if (kirin_pcie->gpio_id_clkreq[i] < 0)
+			return kirin_pcie->gpio_id_clkreq[i];
+
+		sprintf(name, "pcie_clkreq_%d", i);
+		kirin_pcie->clkreq_names[i] = devm_kstrdup_const(dev, name,
+								GFP_KERNEL);
+		if (!kirin_pcie->clkreq_names[i])
+			return -ENOMEM;
+	}
+
 	return 0;
 }
 
@@ -360,6 +382,12 @@ static int kirin_gpio_request(struct kirin_pcie *kirin_pcie,
 			return ret;
 	}
 
+	for (i = 0; i < kirin_pcie->n_gpio_clkreq; i++) {
+		ret = devm_gpio_request(dev, kirin_pcie->gpio_id_clkreq[i],
+					kirin_pcie->clkreq_names[i]);
+		if (ret)
+			return ret;
+	}
 
 	return ret;
 }
@@ -406,36 +434,6 @@ static long kirin970_pcie_get_resource(struct kirin_pcie *kirin_pcie,
 	if (ret)
 		return ret;
 
-	kirin_pcie->gpio_id_clkreq[0] = of_get_named_gpio(dev->of_node,
-						"eth,clkreq-gpios", 0);
-	if (kirin_pcie->gpio_id_clkreq[0] < 0)
-		return -ENODEV;
-
-	kirin_pcie->gpio_id_clkreq[1] = of_get_named_gpio(dev->of_node,
-						"m_2,clkreq-gpios", 0);
-	if (kirin_pcie->gpio_id_clkreq[1] < 0)
-		return -ENODEV;
-
-	kirin_pcie->gpio_id_clkreq[2] = of_get_named_gpio(dev->of_node,
-						"mini1,clkreq-gpios", 0);
-	if (kirin_pcie->gpio_id_clkreq[2] < 0)
-		return -ENODEV;
-
-	ret = devm_gpio_request(dev, kirin_pcie->gpio_id_clkreq[0],
-				    "pcie_eth_clkreq");
-	if (ret)
-		return ret;
-
-	ret = devm_gpio_request(dev, kirin_pcie->gpio_id_clkreq[1],
-				    "pcie_m_2_clkreq");
-	if (ret)
-		return ret;
-
-	ret = devm_gpio_request(dev, kirin_pcie->gpio_id_clkreq[2],
-				    "pcie_mini1_clkreq");
-	if (ret)
-		return ret;
-
 	kirin_pcie->crgctrl =
 		syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
 	if (IS_ERR(kirin_pcie->crgctrl))
@@ -861,7 +859,6 @@ static int kirin970_pcie_noc_power(struct kirin_pcie *kirin_pcie, bool enable)
 
 static int kirin970_pcie_power_on(struct kirin_pcie *kirin_pcie)
 {
-	struct device *dev = kirin_pcie->pci->dev;
 	int ret, i;
 	u32 val;
 
@@ -871,17 +868,11 @@ static int kirin970_pcie_power_on(struct kirin_pcie *kirin_pcie)
 	usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
 	kirin_pcie_oe_enable(kirin_pcie);
 
-	ret = gpio_direction_output(kirin_pcie->gpio_id_clkreq[0], 0);
-	if (ret)
-		dev_err(dev, "Failed to pulse eth clkreq signal\n");
-
-	ret = gpio_direction_output(kirin_pcie->gpio_id_clkreq[1], 0);
-	if (ret)
-		dev_err(dev, "Failed to pulse m.2 clkreq signal\n");
-
-	ret = gpio_direction_output(kirin_pcie->gpio_id_clkreq[2], 0);
-	if (ret)
-		dev_err(dev, "Failed to pulse mini1 clkreq signal\n");
+	for (i = 0; i < kirin_pcie->n_gpio_clkreq; i++) {
+		ret = gpio_direction_output(kirin_pcie->gpio_id_clkreq[i], 0);
+		if (ret)
+			return ret;
+	}
 
 	ret = kirin_pcie_clk_ctrl(kirin_pcie, true);
 	if (ret)
-- 
2.29.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux