On 1/25/2021 10:04 PM, Lorenzo Pieralisi wrote:
External email: Use caution opening links or attachments
On Tue, Nov 03, 2020 at 03:14:21AM +0000, zhangqilong wrote:
Hi
On 11/2/2020 8:00 PM, Zhang Qilong wrote:
External email: Use caution opening links or attachments
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to pm_runtime_put_noidle will result in reference leak in
pex_ep_event_pex_rst_deassert, so we should fix it.
Fixes: c57247f940e8e ("PCI: tegra: Add support for PCIe endpoint mode
in Tegra194")
Signed-off-by: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-tegra194.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c
b/drivers/pci/controller/dwc/pcie-tegra194.c
index f920e7efe118..936510b5c649 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1662,6 +1662,7 @@ static void pex_ep_event_pex_rst_deassert(struct
tegra_pcie_dw *pcie)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
+ pm_runtime_put_noidle(dev);
Why can't we call pm_runtime_put_sync(dev) as that is what is being called in
failure cases anyway further down in this API?
Both of the two functions are OK, the difference is that, when pm_runtime_put_sync failed(runtime of the device has error, the device is in Inaccessible state or other error state...), it only increase the usage count of the power, and do nothing else. We merely need call pm_runtime_put_noidle to decrease the usage count. If we call pm_runtime_put_sync to reset it, it will notify device bus type if the device can be suspended, and that is meanless when pm_runtime_put_sync failed.
I don't understand. Vidya any feedback ?
If I understand this correctly, we are assuming that nothing would have
happened apart from just counter increment and hence don't want to run
the idle check by calling pm_runtime_put_noidle(). On a different note,
what is it that we are going to lose if we let the idle check also to
run i.e. by calling pm_runtime_put_sync()?
Thanks,
Vidya Sagar
Lorenzo
Thanks, best wish!
Zhang Qilong
dev_err(dev, "Failed to get runtime sync for PCIe
dev: %d\n",
ret);
return;
--
2.17.1
