Re: [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 26, 2021 at 1:35 AM Mauro Carvalho Chehab
<mchehab+huawei@xxxxxxxxxx> wrote:
>
> Convert the file into a JSON description at the yaml format.

json-schema, not JSON really. I prefer just 'DT schema' which implies
json-schema in yaml file format.

This one is a bit tricky and suspect it needs a few others converted
to get right. Not asking for that yet, just keep that in mind.

>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
>  .../bindings/pci/amlogic,meson-pcie.txt       |   4 +-
>  .../bindings/pci/axis,artpec6-pcie.txt        |   2 +-
>  .../bindings/pci/designware,pcie.yaml         | 194 ++++++++++++++++++

snps,dw-pcie.yaml

>  .../bindings/pci/designware-pcie.txt          |  77 -------
>  .../bindings/pci/fsl,imx6q-pcie.txt           |   2 +-
>  .../bindings/pci/hisilicon-histb-pcie.txt     |   2 +-
>  .../bindings/pci/hisilicon-pcie.txt           |   2 +-
>  .../devicetree/bindings/pci/kirin-pcie.txt    |   2 +-
>  .../bindings/pci/layerscape-pci.txt           |   2 +-
>  .../bindings/pci/nvidia,tegra194-pcie.txt     |   4 +-
>  .../devicetree/bindings/pci/pci-armada8k.txt  |   2 +-
>  .../devicetree/bindings/pci/pci-keystone.txt  |  10 +-
>  .../devicetree/bindings/pci/pcie-al.txt       |   2 +-
>  .../devicetree/bindings/pci/qcom,pcie.txt     |  14 +-
>  .../bindings/pci/samsung,exynos5440-pcie.txt  |   4 +-
>  .../pci/socionext,uniphier-pcie-ep.yaml       |   2 +-
>  .../devicetree/bindings/pci/ti-pci.txt        |   4 +-
>  .../devicetree/bindings/pci/uniphier-pcie.txt |   2 +-
>  MAINTAINERS                                   |   2 +-
>  19 files changed, 225 insertions(+), 108 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/designware,pcie.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt


> diff --git a/Documentation/devicetree/bindings/pci/designware,pcie.yaml b/Documentation/devicetree/bindings/pci/designware,pcie.yaml
> new file mode 100644
> index 000000000000..e610ed073789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/designware,pcie.yaml
> @@ -0,0 +1,194 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/designware,pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare PCIe interface
> +
> +maintainers:
> +  - Jingoo Han <jingoohan1@xxxxxxxxx>
> +  - Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
> +
> +description: |
> +  Synopsys DesignWare PCIe host controller
> +
> +properties:
> +  compatible:
> +    description: |
> +      The compatible can be either:
> +      - snps,dw-pcie       # for RC mode
> +      - snps,dw-pcie-ep    # For EP mode
> +      or some other value, when there's a host-specific driver

Needs to be a schema. This is complicated because sometimes it's used
and sometimes not. So we need something like this:

anyOf:
  - {}
  - items:
      contains:
        enum:
          - snps,dw-pcie
          - snps,dw-pcie-ep

This will always be true, but at least documents the strings in a
parseable form.

> +
> +  reg:
> +    description: |
> +      For designware cores version < 4.80 contains the configuration
> +      address space. For designware core version >= 4.80, contains
> +      the configuration and ATU address space

And DBI for all versions.


> +    maxItems: 4

minItems: 2

(dbi and config must always be there)

> +
> +  reg-names:
> +    description: |
> +      Must be "config" for the PCIe configuration space and "atu" for
> +      the ATU address space.
> +      (The old way of getting the configuration address space from
> +      "ranges" is deprecated and should be avoided.)

This is getting dropped from the driver and can be dropped here. This
only existed for a few months back in 2013.

> +    maxItems: 4

minItems: 2
items:
  contains:
    enum: [ dbi, dbi2, config, atu ]

> +
> +  num-lanes:
> +    description: |
> +      number of lanes to use (this property should be specified unless
> +      the link is brought already up in BIOS)
> +    maxItems: 1

Not an array. IIRC, pci-bus.yaml covers this. If not, needs a type ref
and min/max (1-16).

> +
> +  reset-gpio:
> +    description: GPIO pin number of power good signal

Isn't this the PERST# signal?

> +    maxItems: 1
> +
> +  clocks:
> +    description: |
> +      Must contain an entry for each entry in clock-names.
> +      See Documentation/devicetree/bindings/clock/clock-bindings.txt for
> +      details.

This is every 'clocks', drop.

> +    minItems: 2
> +    maxItems: 8
> +
> +  clock-names:
> +    description: |
> +      Must include the following entries:
> +      - "pcie"
> +      - "pcie_bus"

Need to be in a schema.

> +    minItems: 2
> +    maxItems: 8
> +
> +  "snps,enable-cdm-check":
> +    $ref: /schemas/types.yaml#definitions/flag
> +    description: |
> +      This is a boolean property and if present enables
> +      automatic checking of CDM (Configuration Dependent Module) registers
> +      for data corruption. CDM registers include standard PCIe configuration
> +      space registers, Port Logic registers, DMA and iATU (internal Address
> +      Translation Unit) registers.
> +

> +  # The following are mandatory properties for RC Mode
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  device_type:
> +    const: pci
> +
> +  ranges:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      ranges for the PCI memory and I/O regions
> +    minItems: 1
> +    maxItems: 8
> +
> +  "#interrupt-cells":
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    const: 1
> +
> +  interrupt-map-mask:
> +    description: |
> +      Standard PCI properties to define the mapping of the PCIe
> +      interface to interrupt numbers.
> +
> +  interrupt-map:
> +    description: |
> +      Standard PCI properties to define the mapping of the PCIe
> +      interface to interrupt numbers.

pci-bus.yaml already covers these. Drop and reference pci-bus.yaml

> +
> +  # The following are optional properties for RC mode
> +
> +  num-viewport:
> +    description: |
> +      number of view ports configured in hardware. If a platform
> +      does not specify it, the driver assumes 2.

This is detected now and can be marked 'deprecated'.

> +
> +  bus-range:
> +    description: |
> +      PCI bus numbers covered (it is recommended for new devicetrees
> +      to specify this property, to keep backwards compatibility a range of
> +      0x00-0xff is assumed if not present)

Covered by pci-bus.yaml.

> +
> +  # The following are mandatory properties for EP Mode
> +
> +  num-ib-windows:
> +    description: number of inbound address translation windows
> +    maxItems: 1
> +
> +  num-ob-windows:
> +    description: number of outbound address translation windows
> +    maxItems: 1

These 2 are detected now and can be marked 'deprecated'.

> +
> +  # The following are optional properties for EP mode
> +
> +  max-functions:
> +    description: maximum number of functions that can be configured
> +    maxItems: 1

Not an array.

> +
> +required:
> +  - reg
> +  - reg-names
> +  - compatible
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: snps,dw-pcie
> +    then:
> +      required:
> +        - compatible
> +        - "#address-cells"
> +        - "#size-cells"
> +        - device_type
> +        - ranges
> +        - "#interrupt-cells"
> +        - interrupt-map-mask
> +        - interrupt-map

All these are required for all pci hosts.


> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: snps,dw-pcie-ep
> +    then:
> +      required:
> +        - compatible
> +        - num-ib-windows
> +        - num-ob-windows
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pcie: pcie@dfc00000 {
> +      compatible = "snps,dw-pcie";
> +      reg = <0xdfc00000 0x0001000>, /* IP registers */
> +            <0xd0000000 0x0002000>; /* Configuration space */
> +      reg-names = "dbi", "config";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      device_type = "pci";
> +      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
> +          0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
> +      interrupts = <25>, <24>;
> +      #interrupt-cells = <1>;
> +      num-lanes = <1>;
> +    };
> +    pcie_ep: pcie_ep@dfd00000 {
> +      compatible = "snps,dw-pcie-ep";
> +      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
> +            <0xdfc01000 0x0001000>, /* IP registers 2 */
> +            <0xd0000000 0x2000000>; /* Configuration space */
> +      reg-names = "dbi", "dbi2", "addr_space";
> +      num-ib-windows = <6>;
> +      num-ob-windows = <2>;
> +      num-lanes = <1>;
> +    };



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux