Re: [v7,3/7] PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2021-01-25 at 13:54 -0600, Rob Herring wrote:
> On Wed, Jan 13, 2021 at 07:39:57PM +0800, Jianjun Wang wrote:
> > MediaTek's PCIe host controller has three generation HWs, the new
> > generation HW is an individual bridge, it supports Gen3 speed and
> > compatible with Gen2, Gen1 speed.
> > 
> > Add support for new Gen3 controller which can be found on MT8192.
> > 
> > Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
> > Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/Kconfig              |  13 +
> >  drivers/pci/controller/Makefile             |   1 +
> >  drivers/pci/controller/pcie-mediatek-gen3.c | 463 ++++++++++++++++++++
> >  3 files changed, 477 insertions(+)
> >  create mode 100644 drivers/pci/controller/pcie-mediatek-gen3.c
> > 
> > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > index 64e2f5e379aa..b242b17025b3 100644
> > --- a/drivers/pci/controller/Kconfig
> > +++ b/drivers/pci/controller/Kconfig
> > @@ -242,6 +242,19 @@ config PCIE_MEDIATEK
> >  	  Say Y here if you want to enable PCIe controller support on
> >  	  MediaTek SoCs.
> >  
> > +config PCIE_MEDIATEK_GEN3
> > +	tristate "MediaTek Gen3 PCIe controller"
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	depends on PCI_MSI_IRQ_DOMAIN
> > +	help
> > +	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
> > +	  This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
> > +	  and support up to 256 MSI interrupt numbers for
> > +	  multi-function devices.
> > +
> > +	  Say Y here if you want to enable Gen3 PCIe controller support on
> > +	  MediaTek SoCs.
> > +
> >  config PCIE_TANGO_SMP8759
> >  	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
> >  	depends on ARCH_TANGO && PCI_MSI && OF
> > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> > index 04c6edc285c5..df5d77d72a9d 100644
> > --- a/drivers/pci/controller/Makefile
> > +++ b/drivers/pci/controller/Makefile
> > @@ -27,6 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> >  obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
> >  obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
> >  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> > +obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
> >  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> >  obj-$(CONFIG_VMD) += vmd.o
> >  obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
> > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> > new file mode 100644
> > index 000000000000..c00ea7c167de
> > --- /dev/null
> > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > @@ -0,0 +1,463 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * MediaTek PCIe host controller driver.
> > + *
> > + * Copyright (c) 2020 MediaTek Inc.
> > + * Author: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> 
> > +#include <linux/of_address.h>
> > +#include <linux/of_clk.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/of_platform.h>
> 
> I don't think these 4 are needed.

Yes, I will drop these in the next version.
> 
> > +#include <linux/pci.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +
> > +#include "../pci.h"
> > +
> > +#define PCIE_SETTING_REG		0x80
> > +#define PCIE_PCI_IDS_1			0x9c
> > +#define PCI_CLASS(class)		(class << 8)
> > +#define PCIE_RC_MODE			BIT(0)
> > +
> > +#define PCIE_CFGNUM_REG			0x140
> > +#define PCIE_CFG_DEVFN(devfn)		((devfn) & GENMASK(7, 0))
> > +#define PCIE_CFG_BUS(bus)		(((bus) << 8) & GENMASK(15, 8))
> > +#define PCIE_CFG_BYTE_EN(bytes)		(((bytes) << 16) & GENMASK(19, 16))
> > +#define PCIE_CFG_FORCE_BYTE_EN		BIT(20)
> > +#define PCIE_CFG_OFFSET_ADDR		0x1000
> > +#define PCIE_CFG_HEADER(bus, devfn) \
> > +	(PCIE_CFG_BUS(bus) | PCIE_CFG_DEVFN(devfn))
> > +
> > +#define PCIE_RST_CTRL_REG		0x148
> > +#define PCIE_MAC_RSTB			BIT(0)
> > +#define PCIE_PHY_RSTB			BIT(1)
> > +#define PCIE_BRG_RSTB			BIT(2)
> > +#define PCIE_PE_RSTB			BIT(3)
> > +
> > +#define PCIE_LTSSM_STATUS_REG		0x150
> > +
> > +#define PCIE_LINK_STATUS_REG		0x154
> > +#define PCIE_PORT_LINKUP		BIT(8)
> > +
> > +#define PCIE_TRANS_TABLE_BASE_REG	0x800
> > +#define PCIE_ATR_SRC_ADDR_MSB_OFFSET	0x4
> > +#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET	0x8
> > +#define PCIE_ATR_TRSL_ADDR_MSB_OFFSET	0xc
> > +#define PCIE_ATR_TRSL_PARAM_OFFSET	0x10
> > +#define PCIE_ATR_TLB_SET_OFFSET		0x20
> > +
> > +#define PCIE_MAX_TRANS_TABLES		8
> > +#define PCIE_ATR_EN			BIT(0)
> > +#define PCIE_ATR_SIZE(size) \
> > +	(((((size) - 1) << 1) & GENMASK(6, 1)) | PCIE_ATR_EN)
> > +#define PCIE_ATR_ID(id)			((id) & GENMASK(3, 0))
> > +#define PCIE_ATR_TYPE_MEM		PCIE_ATR_ID(0)
> > +#define PCIE_ATR_TYPE_IO		PCIE_ATR_ID(1)
> > +#define PCIE_ATR_TLP_TYPE(type)		(((type) << 16) & GENMASK(18, 16))
> > +#define PCIE_ATR_TLP_TYPE_MEM		PCIE_ATR_TLP_TYPE(0)
> > +#define PCIE_ATR_TLP_TYPE_IO		PCIE_ATR_TLP_TYPE(2)
> > +
> > +/**
> > + * struct mtk_pcie_port - PCIe port information
> > + * @dev: pointer to PCIe device
> > + * @base: IO mapped register base
> > + * @reg_base: Physical register base
> > + * @mac_reset: mac reset control
> > + * @phy_reset: phy reset control
> > + * @phy: PHY controller block
> > + * @clks: PCIe clocks
> > + * @num_clks: PCIe clocks count for this port
> > + */
> > +struct mtk_pcie_port {
> > +	struct device *dev;
> > +	void __iomem *base;
> > +	phys_addr_t reg_base;
> > +	struct reset_control *mac_reset;
> > +	struct reset_control *phy_reset;
> > +	struct phy *phy;
> > +	struct clk_bulk_data *clks;
> > +	int num_clks;
> > +};
> > +
> > +/**
> > + * mtk_pcie_config_tlp_header
> > + * @bus: PCI bus to query
> > + * @devfn: device/function number
> > + * @where: offset in config space
> > + * @size: data size in TLP header
> > + *
> > + * Set byte enable field and device information in configuration TLP header.
> > + */
> > +static void mtk_pcie_config_tlp_header(struct pci_bus *bus, unsigned int devfn,
> > +					int where, int size)
> > +{
> > +	struct mtk_pcie_port *port = bus->sysdata;
> > +	int bytes;
> > +	u32 val;
> > +
> > +	bytes = (GENMASK(size - 1, 0) & 0xf) << (where & 0x3);
> > +
> > +	val = PCIE_CFG_FORCE_BYTE_EN | PCIE_CFG_BYTE_EN(bytes) |
> > +	      PCIE_CFG_HEADER(bus->number, devfn);
> > +
> > +	writel_relaxed(val, port->base + PCIE_CFGNUM_REG);
> > +}
> > +
> > +static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> > +				      int where)
> > +{
> > +	struct mtk_pcie_port *port = bus->sysdata;
> > +
> > +	return port->base + PCIE_CFG_OFFSET_ADDR + where;
> > +}
> > +
> > +static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> > +				int where, int size, u32 *val)
> > +{
> > +	mtk_pcie_config_tlp_header(bus, devfn, where, size);
> 
> This can move to mtk_pcie_map_bus. And if that's the only caller, you 
> might as well just merge mtk_pcie_config_tlp_header into 
> mtk_pcie_map_bus.

Thanks for your review, mtk_pcie_config_tlp_header need the TLP data
size to set its byte enable filed, but the map_bus callback dose not
have this value.
> 
> > +
> > +	return pci_generic_config_read32(bus, devfn, where, size, val);
> > +}
> > +
> > +static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> > +				 int where, int size, u32 val)
> > +{
> > +	mtk_pcie_config_tlp_header(bus, devfn, where, size);
> > +
> > +	if (size <= 2)
> > +		val <<= (where & 0x3) * 8;
> > +
> > +	return pci_generic_config_write32(bus, devfn, where, 4, val);
> > +}
> > +
> > +static struct pci_ops mtk_pcie_ops = {
> > +	.map_bus = mtk_pcie_map_bus,
> > +	.read  = mtk_pcie_config_read,
> > +	.write = mtk_pcie_config_write,
> > +};
> > +
> > +static int mtk_pcie_set_trans_table(struct mtk_pcie_port *port,
> > +				    resource_size_t cpu_addr,
> > +				    resource_size_t pci_addr,
> > +				    resource_size_t size,
> > +				    unsigned long type, int num)
> > +{
> > +	void __iomem *table;
> > +	u32 val;
> > +
> > +	if (num >= PCIE_MAX_TRANS_TABLES) {
> > +		dev_err(port->dev, "not enough translate table[%d] for addr: %#llx, limited to [%d]\n",
> > +			num, (unsigned long long) cpu_addr,
> > +			PCIE_MAX_TRANS_TABLES);
> > +		return -ENODEV;
> > +	}
> > +
> > +	table = port->base + PCIE_TRANS_TABLE_BASE_REG +
> > +		num * PCIE_ATR_TLB_SET_OFFSET;
> > +
> > +	writel_relaxed(lower_32_bits(cpu_addr) | PCIE_ATR_SIZE(fls(size) - 1),
> > +		       table);
> > +	writel_relaxed(upper_32_bits(cpu_addr),
> > +		       table + PCIE_ATR_SRC_ADDR_MSB_OFFSET);
> > +	writel_relaxed(lower_32_bits(pci_addr),
> > +		       table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET);
> > +	writel_relaxed(upper_32_bits(pci_addr),
> > +		       table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET);
> > +
> > +	if (type == IORESOURCE_IO)
> > +		val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO;
> > +	else
> > +		val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM;
> > +
> > +	writel_relaxed(val, table + PCIE_ATR_TRSL_PARAM_OFFSET);
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
> > +{
> > +	struct resource_entry *entry;
> > +	struct pci_host_bridge *host = pci_host_bridge_from_priv(port);
> > +	unsigned int table_index = 0;
> > +	int err;
> > +	u32 val;
> > +
> > +	/* Set as RC mode */
> > +	val = readl_relaxed(port->base + PCIE_SETTING_REG);
> > +	val |= PCIE_RC_MODE;
> > +	writel_relaxed(val, port->base + PCIE_SETTING_REG);
> > +
> > +	/* Set class code */
> > +	val = readl_relaxed(port->base + PCIE_PCI_IDS_1);
> > +	val &= ~GENMASK(31, 8);
> > +	val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8);
> > +	writel_relaxed(val, port->base + PCIE_PCI_IDS_1);
> > +
> > +	/* Assert all reset signals */
> > +	val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
> > +	val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
> > +	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
> > +
> > +	/* De-assert reset signals */
> > +	val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB);
> > +	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
> > +
> > +	/* Delay 100ms to wait the reference clocks become stable */
> > +	msleep(100);
> > +
> > +	/* De-assert PERST# signal */
> > +	val &= ~PCIE_PE_RSTB;
> > +	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
> > +
> > +	/* Check if the link is up or not */
> > +	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_REG, val,
> > +				 !!(val & PCIE_PORT_LINKUP), 20,
> > +				 50 * USEC_PER_MSEC);
> > +	if (err) {
> > +		val = readl_relaxed(port->base + PCIE_LTSSM_STATUS_REG);
> > +		dev_err(port->dev, "PCIe link down, ltssm reg val: %#x\n", val);
> > +		return err;
> > +	}
> > +
> > +	/* Set PCIe translation windows */
> > +	resource_list_for_each_entry(entry, &host->windows) {
> > +		struct resource *res = entry->res;
> > +		unsigned long type = resource_type(res);
> > +		resource_size_t cpu_addr;
> > +		resource_size_t pci_addr;
> > +		resource_size_t size;
> > +		const char *range_type;
> > +
> > +		if (type == IORESOURCE_IO) {
> > +			cpu_addr = pci_pio_to_address(res->start);
> > +			range_type = "IO";
> > +		} else if (type == IORESOURCE_MEM) {
> > +			cpu_addr = res->start;
> > +			range_type = "MEM";
> > +		} else {
> > +			continue;
> > +		}
> > +
> > +		pci_addr = res->start - entry->offset;
> > +		size = resource_size(res);
> > +		err = mtk_pcie_set_trans_table(port, cpu_addr, pci_addr, size,
> > +					       type, table_index);
> > +		if (err)
> > +			return err;
> > +
> > +		dev_dbg(port->dev, "set %s trans window[%d]: cpu_addr = %#llx, pci_addr = %#llx, size = %#llx\n",
> > +			range_type, table_index, (unsigned long long) cpu_addr,
> > +			(unsigned long long) pci_addr,
> > +			(unsigned long long) size);
> > +
> > +		table_index++;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_pcie_clk_init(struct mtk_pcie_port *port)
> > +{
> > +	int ret;
> > +
> > +	port->num_clks = devm_clk_bulk_get_all(port->dev, &port->clks);
> > +	if (port->num_clks < 0) {
> > +		dev_err(port->dev, "failed to get PCIe clock\n");
> > +		return port->num_clks;
> > +	}
> > +
> > +	ret = clk_bulk_prepare_enable(port->num_clks, port->clks);
> > +	if (ret) {
> > +		dev_err(port->dev, "failed to enable PCIe clocks\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_pcie_power_up(struct mtk_pcie_port *port)
> > +{
> > +	struct device *dev = port->dev;
> > +	int err;
> > +
> > +	port->phy_reset = devm_reset_control_get_optional_exclusive(dev, "phy");
> > +	if (IS_ERR(port->phy_reset))
> > +		return PTR_ERR(port->phy_reset);
> > +
> > +	/* PHY power on and enable pipe clock */
> > +	port->phy = devm_phy_optional_get(dev, "pcie-phy");
> > +	if (IS_ERR(port->phy))
> > +		return PTR_ERR(port->phy);
> > +
> > +	reset_control_deassert(port->phy_reset);
> > +
> > +	err = phy_init(port->phy);
> > +	if (err) {
> > +		dev_err(dev, "failed to initialize PCIe phy\n");
> > +		goto err_phy_init;
> > +	}
> > +
> > +	err = phy_power_on(port->phy);
> > +	if (err) {
> > +		dev_err(dev, "failed to power on PCIe phy\n");
> > +		goto err_phy_on;
> > +	}
> > +
> > +	port->mac_reset = devm_reset_control_get_optional_exclusive(dev, "mac");
> > +	if (IS_ERR(port->mac_reset)) {
> > +		err = PTR_ERR(port->mac_reset);
> > +		goto err_mac_rst;
> > +	}
> > +
> > +	reset_control_deassert(port->mac_reset);
> > +
> > +	/* MAC power on and enable transaction layer clocks */
> > +	pm_runtime_enable(dev);
> > +	pm_runtime_get_sync(dev);
> > +
> > +	err = mtk_pcie_clk_init(port);
> > +	if (err) {
> > +		dev_err(dev, "clock init failed\n");
> > +		goto err_clk_init;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_clk_init:
> > +	pm_runtime_put_sync(dev);
> > +	pm_runtime_disable(dev);
> > +	reset_control_assert(port->mac_reset);
> > +err_mac_rst:
> > +	phy_power_off(port->phy);
> > +err_phy_on:
> > +	phy_exit(port->phy);
> > +err_phy_init:
> > +	reset_control_assert(port->phy_reset);
> > +
> > +	return err;
> > +}
> > +
> > +static void mtk_pcie_power_down(struct mtk_pcie_port *port)
> > +{
> > +	clk_bulk_disable_unprepare(port->num_clks, port->clks);
> > +
> > +	pm_runtime_put_sync(port->dev);
> > +	pm_runtime_disable(port->dev);
> > +	reset_control_assert(port->mac_reset);
> > +
> > +	phy_power_off(port->phy);
> > +	phy_exit(port->phy);
> > +	reset_control_assert(port->phy_reset);
> > +}
> > +
> > +static int mtk_pcie_setup(struct mtk_pcie_port *port)
> > +{
> > +	struct device *dev = port->dev;
> > +	struct platform_device *pdev = to_platform_device(dev);
> > +	struct resource *regs;
> > +	int err;
> > +
> > +	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcie-mac");
> > +	port->base = devm_ioremap_resource(dev, regs);
> 
> Use devm_platform_ioremap_resource_byname()

The regs will be needed to get the physical address of PCIe register, it
will be used to configure the capture address of MSI.
> 
> > +	if (IS_ERR(port->base)) {
> > +		dev_err(dev, "failed to map register base\n");
> > +		return PTR_ERR(port->base);
> > +	}
> > +
> > +	port->reg_base = regs->start;
> > +
> > +	/* Don't touch the hardware registers before power up */
> > +	err = mtk_pcie_power_up(port);
> > +	if (err)
> > +		return err;
> > +
> > +	/* Try link up */
> > +	err = mtk_pcie_startup_port(port);
> > +	if (err) {
> > +		dev_err(dev, "PCIe startup failed\n");
> > +		goto err_setup;
> > +	}
> > +
> > +	dev_info(dev, "PCIe link up success!\n");
> 
> Do you really need this, there's lots printed by PCI in the successful 
> case.

I will drop this in the next version, thanks for your review.

Thanks.
> 
> > +
> > +	return 0;
> > +
> > +err_setup:
> > +	mtk_pcie_power_down(port);
> > +
> > +	return err;
> > +}
> > +
> > +static int mtk_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct mtk_pcie_port *port;
> > +	struct pci_host_bridge *host;
> > +	int err;
> > +
> > +	host = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> > +	if (!host)
> > +		return -ENOMEM;
> > +
> > +	port = pci_host_bridge_priv(host);
> > +
> > +	port->dev = dev;
> > +	platform_set_drvdata(pdev, port);
> > +
> > +	err = mtk_pcie_setup(port);
> > +	if (err)
> > +		return err;
> > +
> > +	host->ops = &mtk_pcie_ops;
> > +	host->sysdata = port;
> > +
> > +	err = pci_host_probe(host);
> > +	if (err) {
> > +		mtk_pcie_power_down(port);
> > +		return err;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_pcie_remove(struct platform_device *pdev)
> > +{
> > +	struct mtk_pcie_port *port = platform_get_drvdata(pdev);
> > +	struct pci_host_bridge *host = pci_host_bridge_from_priv(port);
> > +
> > +	pci_lock_rescan_remove();
> > +	pci_stop_root_bus(host->bus);
> > +	pci_remove_root_bus(host->bus);
> > +	pci_unlock_rescan_remove();
> > +
> > +	mtk_pcie_power_down(port);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id mtk_pcie_of_match[] = {
> > +	{ .compatible = "mediatek,mt8192-pcie" },
> > +	{},
> > +};
> > +
> > +static struct platform_driver mtk_pcie_driver = {
> > +	.probe = mtk_pcie_probe,
> > +	.remove = mtk_pcie_remove,
> > +	.driver = {
> > +		.name = "mtk-pcie",
> > +		.of_match_table = mtk_pcie_of_match,
> > +	},
> > +};
> > +
> > +module_platform_driver(mtk_pcie_driver);
> > +MODULE_LICENSE("GPL v2");
> > -- 
> > 2.25.1
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux