Re: [PATCH v2 1/2] dt-bindings: rockchip: Add DesignWare based PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 20, 2021 at 06:07:29PM +0100, Johan Jonker wrote:
> Hi Simon,
> 
> Thanks you for version 2.
> A few comments, have a look if it is useful or that you disagree.
> 
> This patch has no commit message. Add one in version 3.
> 
> Submit all patches in one batch with the same sort message ID to all
> maintainers including Heiko.
> 
> Heiko Stuebner <heiko@xxxxxxxxx>
> 
> Example message ID:
> 20210120101554.241029-1-xxm@xxxxxxxxxxxxxx
> 
> /////
> 
> Included is a copy of the Rockchip pcie nodes in a sort of test.dts below.
> Could you confirm that the properties in that dts are the one that we
> can expect for Linux mainline and can base our YAML document on?
> 
> With rk3568-cru.h and rk3568-power.h manualy added we do some tests with
> the following commands:
> 
> make ARCH=arm64 dt_binding_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/pci/pci-bus.yaml
> 
> /////
> 
> Example notifications:
> 
> /arch/arm64/boot/dts/rockchip/test.dt.yaml: pcie@fe270000: reg: [[3,
> 3225419776, 0, 4194304], [0, 4263968768, 0, 65536]] is too long
> 
> /arch/arm64/boot/dts/rockchip/test.dt.yaml: pcie@fe270000: ranges:
> 'oneOf' conditional failed, one must be fixed:
> 
> Before you submit version 3 make sure that all warnings gone as much as
> possible.
> 
> On 1/20/21 11:15 AM, Simon Xue wrote:
> > Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/pci/rockchip-dw-pcie.yaml        | 140 ++++++++++++++++++
> >  1 file changed, 140 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> > new file mode 100644
> > index 000000000000..9d3a57f5305e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> > @@ -0,0 +1,140 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: DesignWare based PCIe RC controller on Rockchip SoCs
> > +
> > +maintainers:
> > +  - Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> > +  - Simon Xue <xxm@xxxxxxxxxxxxxx>
>      - Heiko Stuebner <heiko@xxxxxxxxx> ;)
> > +
> > +description: |+
> > +  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
> > +  PCIe IP and thus inherits all the common properties defined in
> > +  designware-pcie.txt.
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-bus.yaml#
> > +
> > +# We need a select here so we don't match all nodes with 'snps,dw-pcie'
> > +select:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        const: rockchip,rk3568-pcie
> > +  required:
> > +    - compatible
> > +
> > +properties:
> > +  compatible:
> 
> > +    item:
> 
>     items:
> 
> > +      - const: rockchip,rk3568-pcie
> > +      - const: snps,dw-pcie
> 
> Add empty line
> 
> > +  reg:    items:
>       - description:
>       - description:
> 
> Add some description for regs.
> 
> > +    maxItems: 1
> remove
> 
> This reg maxItems gives errors.
> 
> > +
> 
> > +  interrupt:
> interrupts:
>    items:
> 
> > +      - description: system information
> > +      - description: power management control
> > +      - description: PCIe message
> > +      - description: legacy interrupt
> > +      - description: error report
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: sys
> > +      - const: pmc
> > +      - const: msg

MSI? If so, use 'msi'. The DWC core will handle setting it up now.

> > +      - const: legacy
> > +      - const: err
> > +
> > +  clocks:
> > +    items:
> > +      - description: AHB clock for PCIe master
> > +      - description: AHB clock for PCIe slave
> > +      - description: AHB clock for PCIe dbi
> > +      - description: APB clock for PCIe
> > +      - description: Auxiliary clock for PCIe
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aclk_mst
> > +      - const: aclk_slv
> > +      - const: aclk_dbi
> > +      - const: pclk
> > +      - const: aux
> > +
> > +  msi-map: true
> > +
> > +  power-domains:
> > +    maxItems: 1
> 
> /////
> These properties come from designware-pcie.txt
> Maybe add them here for now till there's a common yaml?
> 
>   num-ib-windows: number of inbound address translation windows
>   num-ob-windows: number of outbound address translation windows

These can be and are now detected at runtime.

Rob



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux