From: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
This patchset adds support for the Microchip PCIe PolarFire PCIe
controller when configured in host (Root Complex) mode.
Updates since v19:
* Fixed typos and compiler warning
Updates since v18:
* Upgraded interrupt handling as per Lorenzo Pieralisi's suggestions.
Gathered disparate registers onto an event register, created a new event domain,
and split out end-of-interrupt functionality.
Updates since v17:
* Regenerated to apply to v5.10rc1
* Added self as maintainer
* Added clock enables and extra interrupt handling
Updates since v16:
* Patch needs CONFIG_PCI_HOST_COMMON. Add this to Kconfig stanza
Updates since v15:
* Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge()
* Use host_common_probe() and an init function to set up hw windows
* status is u32 in mc_pcie_isr()
* Removed mask var in mc_mask_intx_irq(), mc_unmask_intx_irq()
* irq var is now signed in mc_platform_init()
Updates since v14:
* Removed cfg_read/cfg_write inline functions
* Updated to irq_data_get_irq_chip_data()
* Updated to use devm_platform_ioremap_resource()
* Replaced of_pci_range parsing to setup windows via bridge pointer.
Updates since v13:
* Refactored to use pci_host_common_probe()
Updates since v12:
* Capitalised commit messages. Use specific subject line for dt-bindings
Updates since v11:
* Adjusted so yaml file passses make dt_binding_check
Updates since v10:
* Adjusted driver as per Rob Herring's comments, notably:
- use common PCI_MSI_FLAGS defines
- reduce storage of unnecessary vars in mc_pcie struct
- switched to read/write relaxed variants
- extended lock in msi_domain_alloc routine
- improved 32bit safety, switched from find_first_bit() to ilog2()
- removed unnecessary twiddle of eCAM config space
Updates since v9:
* Adjusted commit logs
* make dt_bindings_check passes
Updates since v8:
* Refactored as per Rob Herring's comments:
- bindings in schema format
- Adjusted licence to GPLv2.0
- Refactored access to config space between driver and common eCAM code
- Adopted pci_host_probe()
- Miscellanous other improvements
Updates since v7:
* Build for 64bit RISCV architecture only
Updates since v6:
* Refactored to use common eCAM driver
* Updated to CONFIG_PCIE_MICROCHIP_HOST etc
* Formatting improvements
* Removed code for selection between bridge 0 and 1
Updates since v5:
* Fixed Kconfig typo noted by Randy Dunlap
* Updated with comments from Bjorn Helgaas
Updates since v4:
* Fix compile issues.
Updates since v3:
* Update all references to Microsemi to Microchip
* Separate MSI functionality from legacy PCIe interrupt handling functionality
Updates since v2:
* Split out DT bindings and Vendor ID updates into their own patch
from PCIe driver.
* Updated Change Log
Updates since v1:
* Incorporate feedback from Bjorn Helgaas
Daire McNamara (4):
PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge
dt-bindings: PCI: microchip: Add Microchip PolarFire host binding
PCI: microchip: Add host driver for Microchip PCIe controller
MAINTAINERS: Add Daire McNamara as maintainer for the Microchip PCIe
driver
.../bindings/pci/microchip,pcie-host.yaml | 92 ++
MAINTAINERS | 7 +
drivers/pci/controller/Kconfig | 10 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-host-common.c | 4 +-
drivers/pci/controller/pcie-microchip-host.c | 1119 +++++++++++++++++
6 files changed, 1231 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
create mode 100644 drivers/pci/controller/pcie-microchip-host.c
base-commit: 3650b228f83adda7e5ee532e2b90429c03f7b9ec
--
2.25.1
