Add suspend_noirq and resume_noirq callback functions to implement
PM system suspend hooks for MediaTek Gen3 PCIe controller.
When system suspend, trigger the PCIe link to L2 state and pull down
the PERST# pin, gating the clocks of MAC layer and power off the
physical layer for the sake of power saving.
When system resum, the PCIe link should be re-established and the
related control register values should be restored.
Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
---
drivers/pci/controller/pcie-mediatek-gen3.c | 78 +++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 152820f28da1..ac6c43cea575 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -49,6 +49,9 @@
#define PCIE_PE_RSTB BIT(3)
#define PCIE_LTSSM_STATUS_REG 0x150
+#define PCIE_LTSSM_STATE_MASK GENMASK(28, 24)
+#define PCIE_LTSSM_STATE(val) ((val & PCIE_LTSSM_STATE_MASK) >> 24)
+#define PCIE_LTSSM_STATE_L2_IDLE 0x14
#define PCIE_LINK_STATUS_REG 0x154
#define PCIE_PORT_LINKUP BIT(8)
@@ -76,6 +79,9 @@
#define PCIE_MSI_SET_ADDR_HI_BASE 0xc80
#define PCIE_MSI_SET_ADDR_HI_OFFSET 0x04
+#define PCIE_ICMD_PM_REG 0x198
+#define PCIE_TURN_OFF_LINK BIT(4)
+
#define PCIE_TRANS_TABLE_BASE_REG 0x800
#define PCIE_ATR_SRC_ADDR_MSB_OFFSET 0x4
#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET 0x8
@@ -869,6 +875,77 @@ static int mtk_pcie_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused mtk_pcie_turn_off_link(struct mtk_pcie_port *port)
+{
+ u32 val;
+
+ val = readl_relaxed(port->base + PCIE_ICMD_PM_REG);
+ val |= PCIE_TURN_OFF_LINK;
+ writel_relaxed(val, port->base + PCIE_ICMD_PM_REG);
+
+ /* Check the link is L2 */
+ return readl_poll_timeout(port->base + PCIE_LTSSM_STATUS_REG, val,
+ (PCIE_LTSSM_STATE(val) ==
+ PCIE_LTSSM_STATE_L2_IDLE), 20,
+ 50 * USEC_PER_MSEC);
+}
+
+static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
+{
+ struct mtk_pcie_port *port = dev_get_drvdata(dev);
+ int err;
+ u32 val;
+
+ /* Trigger link to L2 state */
+ err = mtk_pcie_turn_off_link(port);
+ if (err) {
+ dev_err(port->dev, "can not enter L2 state\n");
+ return err;
+ }
+
+ /* Pull down the PERST# pin */
+ val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
+ val |= PCIE_PE_RSTB;
+ writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
+
+ dev_dbg(port->dev, "enter L2 state success");
+
+ clk_bulk_disable_unprepare(port->num_clks, port->clks);
+
+ phy_power_off(port->phy);
+
+ return 0;
+}
+
+static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
+{
+ struct mtk_pcie_port *port = dev_get_drvdata(dev);
+ int err;
+
+ phy_power_on(port->phy);
+
+ err = clk_bulk_prepare_enable(port->num_clks, port->clks);
+ if (err) {
+ dev_dbg(dev, "failed to enable PCIe clocks\n");
+ return err;
+ }
+
+ err = mtk_pcie_startup_port(port);
+ if (err) {
+ dev_err(port->dev, "resume failed\n");
+ return err;
+ }
+
+ dev_dbg(port->dev, "resume done\n");
+
+ return 0;
+}
+
+static const struct dev_pm_ops mtk_pcie_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
+ mtk_pcie_resume_noirq)
+};
+
static const struct of_device_id mtk_pcie_of_match[] = {
{ .compatible = "mediatek,mt8192-pcie" },
{},
@@ -880,6 +957,7 @@ static struct platform_driver mtk_pcie_driver = {
.driver = {
.name = "mtk-pcie",
.of_match_table = mtk_pcie_of_match,
+ .pm = &mtk_pcie_pm_ops,
},
};
--
2.25.1
