On Mon, Nov 30, 2020 at 04:11:37PM -0500, Jim Quinlan wrote: > v2 -- Use regulator bulk API rather than multiple calls (MarkB). > > v1 -- Bindings are added for fixed regulators that may power the EP device. > -- The brcmstb RC driver is modified to control these regulators > during probe, suspend, and resume. > -- 7216 type SOCs have additional error reporting HW and a > panic handler is added to dump its info. > -- A missing return value check is added. > > > Jim Quinlan (6): > dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators > PCI: brcmstb: Add control of EP voltage regulator(s) > PCI: brcmstb: Do not turn off regulators if EP can wake up > PCI: brcmstb: Give 7216 SOCs their own config type > PCI: brcmstb: Add panic/die handler to RC driver > PCI: brcmstb: check return value of clk_prepare_enable() If/when you repost this, capitalize the subjects consistently. > .../bindings/pci/brcm,stb-pcie.yaml | 12 + > drivers/pci/controller/pcie-brcmstb.c | 219 +++++++++++++++++- > 2 files changed, 228 insertions(+), 3 deletions(-) > > -- > 2.17.1 >
