Meanwhile the PCI core disables parity checking for a device that has broken_parity_status set. Therefore we don't need the quirk any longer to disable parity checking on the first parity error interrupt. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- drivers/net/ethernet/realtek/r8169_main.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index c9abc7ccb..024042f37 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4329,20 +4329,6 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) if (net_ratelimit()) netdev_err(dev, "PCI error (cmd = 0x%04x, status_errs = 0x%04x)\n", pci_cmd, pci_status_errs); - /* - * The recovery sequence below admits a very elaborated explanation: - * - it seems to work; - * - I did not see what else could be done; - * - it makes iop3xx happy. - * - * Feel free to adjust to your needs. - */ - if (pdev->broken_parity_status) - pci_cmd &= ~PCI_COMMAND_PARITY; - else - pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY; - - pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING); } -- 2.30.0
