On Wed, Dec 16, 2020 at 1:08 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > On Tue, Dec 15, 2020 at 02:09:12PM +0100, Ian Kumlien wrote: > > On Tue, Dec 15, 2020 at 1:40 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > > > > On Mon, Dec 14, 2020 at 11:56:31PM +0100, Ian Kumlien wrote: > > > > On Mon, Dec 14, 2020 at 8:19 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > > > > > > If you're interested, you could probably unload the Realtek drivers, > > > > > remove the devices, and set the PCI_EXP_LNKCTL_LD (Link Disable) bit > > > > > in 02:04.0, e.g., > > > > > > > > > > # RT=/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:04.0 > > > > > # echo 1 > $RT/0000:04:00.0/remove > > > > > # echo 1 > $RT/0000:04:00.1/remove > > > > > # echo 1 > $RT/0000:04:00.2/remove > > > > > # echo 1 > $RT/0000:04:00.4/remove > > > > > # echo 1 > $RT/0000:04:00.7/remove > > > > > # setpci -s02:04.0 CAP_EXP+0x10.w=0x0010 > > > > > > > > > > That should take 04:00.x out of the picture. > > > > > > > > Didn't actually change the behaviour, I'm suspecting an errata for AMD pcie... > > > > > > > > So did this, with unpatched kernel: > > > > [ ID] Interval Transfer Bitrate Retr Cwnd > > > > [ 5] 0.00-1.00 sec 4.56 MBytes 38.2 Mbits/sec 0 67.9 KBytes > > > > [ 5] 1.00-2.00 sec 4.47 MBytes 37.5 Mbits/sec 0 96.2 KBytes > > > > [ 5] 2.00-3.00 sec 4.85 MBytes 40.7 Mbits/sec 0 50.9 KBytes > > > > [ 5] 3.00-4.00 sec 4.23 MBytes 35.4 Mbits/sec 0 70.7 KBytes > > > > [ 5] 4.00-5.00 sec 4.23 MBytes 35.4 Mbits/sec 0 48.1 KBytes > > > > [ 5] 5.00-6.00 sec 4.23 MBytes 35.4 Mbits/sec 0 45.2 KBytes > > > > [ 5] 6.00-7.00 sec 4.23 MBytes 35.4 Mbits/sec 0 36.8 KBytes > > > > [ 5] 7.00-8.00 sec 3.98 MBytes 33.4 Mbits/sec 0 36.8 KBytes > > > > [ 5] 8.00-9.00 sec 4.23 MBytes 35.4 Mbits/sec 0 36.8 KBytes > > > > [ 5] 9.00-10.00 sec 4.23 MBytes 35.4 Mbits/sec 0 48.1 KBytes > > > > - - - - - - - - - - - - - - - - - - - - - - - - - > > > > [ ID] Interval Transfer Bitrate Retr > > > > [ 5] 0.00-10.00 sec 43.2 MBytes 36.2 Mbits/sec 0 sender > > > > [ 5] 0.00-10.00 sec 42.7 MBytes 35.8 Mbits/sec receiver > > > > > > > > and: > > > > echo 0 > /sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/link/l1_aspm > > > > > > BTW, thanks a lot for testing out the "l1_aspm" sysfs file. I'm very > > > pleased that it seems to be working as intended. > > > > It was nice to find it for easy disabling :) > > > > > > and: > > > > [ ID] Interval Transfer Bitrate Retr Cwnd > > > > [ 5] 0.00-1.00 sec 113 MBytes 951 Mbits/sec 153 772 KBytes > > > > [ 5] 1.00-2.00 sec 109 MBytes 912 Mbits/sec 276 550 KBytes > > > > [ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec 123 625 KBytes > > > > [ 5] 3.00-4.00 sec 111 MBytes 933 Mbits/sec 31 687 KBytes > > > > [ 5] 4.00-5.00 sec 110 MBytes 923 Mbits/sec 0 679 KBytes > > > > [ 5] 5.00-6.00 sec 110 MBytes 923 Mbits/sec 136 577 KBytes > > > > [ 5] 6.00-7.00 sec 110 MBytes 923 Mbits/sec 214 645 KBytes > > > > [ 5] 7.00-8.00 sec 110 MBytes 923 Mbits/sec 32 628 KBytes > > > > [ 5] 8.00-9.00 sec 110 MBytes 923 Mbits/sec 81 537 KBytes > > > > [ 5] 9.00-10.00 sec 110 MBytes 923 Mbits/sec 10 577 KBytes > > > > - - - - - - - - - - - - - - - - - - - - - - - - - > > > > [ ID] Interval Transfer Bitrate Retr > > > > [ 5] 0.00-10.00 sec 1.08 GBytes 927 Mbits/sec 1056 sender > > > > [ 5] 0.00-10.00 sec 1.07 GBytes 923 Mbits/sec receiver > > > > > > > > But this only confirms that the fix i experience is a side effect. > > > > > > > > The original code is still wrong :) > > > > > > What exactly is this machine? Brand, model, config? Maybe you could > > > add this and a dmesg log to the buzilla? It seems like other people > > > should be seeing the same problem, so I'm hoping to grub around on the > > > web to see if there are similar reports involving these devices. > > > > ASUS Pro WS X570-ACE with AMD Ryzen 9 3900X > > Possible similar issues: > > https://forums.unraid.net/topic/94274-hardware-upgrade-woes/ > https://forums.servethehome.com/index.php?threads/upgraded-my-home-server-from-intel-to-amd-virtual-disk-stuck-in-degraded-unhealty-state.25535/ (Windows) Could be, I suspect that we need a workaround (is there a quirk for "reporting wrong latency"?) and the patches. > > > https://bugzilla.kernel.org/show_bug.cgi?id=209725 > > > > > > Here's one that is superficially similar: > > > https://linux-hardware.org/index.php?probe=e5f24075e5&log=lspci_all > > > in that it has a RP -- switch -- I211 path. Interestingly, the switch > > > here advertises <64us L1 exit latency instead of the <32us latency > > > your switch advertises. Of course, I can't tell if it's exactly the > > > same switch. > > > > Same chipset it seems > > > > I'm running bios version: > > Version: 2206 > > Release Date: 08/13/2020 > > > > ANd latest is: > > Version 3003 > > 2020/12/07 > > > > Will test upgrading that as well, but it could be that they report the > > incorrect latency of the switch - I don't know how many things AGESA > > changes but... It's been updated twice since my upgrade. > > I wouldn't be surprised if the advertised exit latencies are writable > by the BIOS because it probably depends on electrical characteristics > outside the switch. If so, it's possible ASUS just screwed it up. Not surprisingly, nothing changed. (There was a lot of "stability improvements")
