[+cc Alex (please include people who have commented on previous
versions]
Looking for your ack before applying this, Alex.
On Wed, Dec 02, 2020 at 07:34:50PM +0800, Chiqijun wrote:
> When multiple VFs do FLR at the same time, the firmware is
> processed serially, resulting in some VF FLRs being delayed more
> than 100ms, when the virtual machine restarts and the device
> driver is loaded, the firmware is doing the corresponding VF
> FLR, causing the driver to fail to load.
>
> To solve this problem, add host and firmware status synchronization
> during FLR.
>
> Signed-off-by: Chiqijun <chiqijun@xxxxxxxxxx>
> ---
> v2:
> - Update comments
> - Use the HINIC_VF_FLR_CAP_BIT_SHIFT and HINIC_VF_FLR_PROC_BIT_SHIFT
> macro instead of the magic number
> ---
> drivers/pci/quirks.c | 75 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index f70692ac79c5..c9ad55709d03 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3912,6 +3912,79 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> return 0;
> }
>
> +#define PCI_DEVICE_ID_HINIC_VF 0x375E
> +#define HINIC_VF_FLR_TYPE 0x1000
> +#define HINIC_VF_FLR_CAP_BIT_SHIFT 6
> +#define HINIC_VF_OP 0xE80
> +#define HINIC_VF_FLR_PROC_BIT_SHIFT 10
> +#define HINIC_OPERATION_TIMEOUT 15000
> +
> +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> +{
> + unsigned long timeout;
> + void __iomem *bar;
> + u16 old_command;
> + u32 val;
> +
> + if (probe)
> + return 0;
> +
> + bar = pci_iomap(pdev, 0, 0);
> + if (!bar)
> + return -ENOTTY;
> +
> + pci_read_config_word(pdev, PCI_COMMAND, &old_command);
> +
> + /*
> + * FLR cap bit bit30, FLR processing bit: bit18, to avoid big-endian
> + * conversion the big-endian bit6, bit10 is directly operated here.
> + *
> + * Get and check firmware capabilities.
> + */
> + val = readl(bar + HINIC_VF_FLR_TYPE);
> + if (!(val & (1UL << HINIC_VF_FLR_CAP_BIT_SHIFT))) {
> + pci_iounmap(pdev, bar);
> + return -ENOTTY;
> + }
> +
> + /*
> + * Set the processing bit for the start of FLR, which will be cleared
> + * by the firmware after FLR is completed.
> + */
> + val = readl(bar + HINIC_VF_OP);
> + val = val | (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT);
> + writel(val, bar + HINIC_VF_OP);
> +
> + /* Perform the actual device function reset */
> + pcie_flr(pdev);
> +
> + pci_write_config_word(pdev, PCI_COMMAND,
> + old_command | PCI_COMMAND_MEMORY);
> +
> + /* Waiting for device reset complete */
> + timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
> + do {
> + val = readl(bar + HINIC_VF_OP);
> + if (!(val & (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT)))
> + goto reset_complete;
> + msleep(20);
> + } while (time_before(jiffies, timeout));
> +
> + val = readl(bar + HINIC_VF_OP);
> + if (!(val & (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT)))
> + goto reset_complete;
> +
> + pci_warn(pdev, "Reset dev timeout, flr ack reg: %x\n",
> + be32_to_cpu(val));
> +
> +reset_complete:
> + pci_write_config_word(pdev, PCI_COMMAND, old_command);
> + pci_iounmap(pdev, bar);
> +
> + return 0;
> +}
> +
> static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
> reset_intel_82599_sfp_virtfn },
> @@ -3923,6 +3996,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
> { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> reset_chelsio_generic_dev },
> + { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> + reset_hinic_vf_dev },
> { 0 }
> };
>
> --
> 2.17.1
>
