[PATCH v3 1/2] dt-bindings: PCI: brcmstb: add BCM4908 binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafał Miłecki <rafal@xxxxxxxxxx>

BCM4908 is a SoC family with PCIe controller sharing design with the one
for STB. BCM4908 has different power management and memory controller so
few tweaks are required.

PERST# signal on BCM4908 is handled by an external MISC block so it
needs specifying a reset phandle.

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
V3: Drop "reset-names" from the generic "properties" - it's now defined as
    "compatible" specific property
    Drop "$ref" from the "resets" - thanks Rob.
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 37 ++++++++++++++-----
 1 file changed, 28 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 807694b4f41f..f90557f6deb8 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm4908-pcie
           - brcm,bcm7211-pcie # Broadcom STB version of RPi4
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
@@ -63,15 +64,6 @@ properties:
 
   aspm-no-l0s: true
 
-  resets:
-    description: for "brcm,bcm7216-pcie", must be a valid reset
-      phandle pointing to the RESCAL reset controller provider node.
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-
-  reset-names:
-    items:
-      - const: rescal
-
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to
@@ -98,12 +90,39 @@ required:
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4908-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset controller handling the PERST# signal
+
+        reset-names:
+          items:
+            - const: perst
+
+      required:
+        - resets
+        - reset-names
   - if:
       properties:
         compatible:
           contains:
             const: brcm,bcm7216-pcie
     then:
+      properties:
+        resets:
+          items:
+            - description: phandle pointing to the RESCAL reset controller
+
+        reset-names:
+          items:
+            - const: rescal
+
       required:
         - resets
         - reset-names
-- 
2.26.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux