Am 2020-12-08 22:06, schrieb Bjorn Helgaas:
[+cc Qian] On Tue, Dec 08, 2020 at 04:41:50PM +0100, Michael Walle wrote:Hi Lorenzo, Krzysztof, >On Sun, 29 Nov 2020 23:07:38 +0000, Krzysztof Wilczyński wrote: >> Unify ECAM-related constants into a single set of standard constants >> defining memory address shift values for the byte-level address that can >> be used when accessing the PCI Express Configuration Space, and then >> move native PCI Express controller drivers to use newly introduced >> definitions retiring any driver-specific ones. >> >> The ECAM ("Enhanced Configuration Access Mechanism") is defined by the >> PCI Express specification (see PCI Express Base Specification, Revision >> 5.0, Version 1.0, Section 7.2.2, p. 676), thus most hardware should >> implement it the same way. >> >> [...] > >Applied to pci/ecam, thanks! > >[1/5] PCI: Unify ECAM constants in native PCI Express drivers > https://git.kernel.org/lpieralisi/pci/c/f3c07cf692 >[2/5] PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser > https://git.kernel.org/lpieralisi/pci/c/3c38579263 >[3/5] PCI: iproc: Convert to use the new ECAM constants > https://git.kernel.org/lpieralisi/pci/c/333ec9d3cc >[4/5] PCI: vmd: Update type of the __iomem pointers > https://git.kernel.org/lpieralisi/pci/c/89094c12ea >[5/5] PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c > https://git.kernel.org/lpieralisi/pci/c/3dc62532a5 Patch 1/5 breaks LS1028A boards:I temporarily dropped this series while we figure out what went wrong here.
Thanks, let me know if I can test something on the board. -michael
