Re: [PATCH] PCI: Add pci reset quirk for Huawei Intelligent NIC virtual function

[Chiqijun <chiqijun@xxxxxxxxxx>]

On 2020/11/29 7:29, Bjorn Helgaas wrote:
> [+cc Alex]
>
> On Sat, Nov 28, 2020 at 02:18:25PM +0800, Chiqijun wrote:
> > When multiple VFs do FLR at the same time, the firmware is
> > processed serially, resulting in some VF FLRs being delayed more
> > than 100ms, when the virtual machine restarts and the device
> > driver is loaded, the firmware is doing the corresponding VF
> > FLR, causing the driver to fail to load.
> >
> > To solve this problem, add host and firmware status synchronization
> > during FLR.
>
> Is this because the Huawei Intelligent NIC isn't following the spec,
> or is it because Linux isn't correctly waiting for the FLR to
> complete?

Huawei Intelligent NIC may have FLR exceeding 100ms specified by spec 
when multiple VFs are concurrently using FLR. This patch ensures that 
FLR is completed reliably.

> If this is a Huawei Intelligent NIC defect, is there documentation
> somewhere (errata) that you can reference?  Will it be fixed in future
> designs, so we don't have to add future Device IDs to the quirk?

This problem is related to the VF specifications of Huawei Intelligent 
NIC. We will update the specifications on Huawei’s official website and 
explain this problem later;

In the follow-up Huawei Intelligent NIC series, we are trying to 
optimize the processing time of a single FLR and expand the 
specifications of concurrent VF FLR.

> > Signed-off-by: Chiqijun <chiqijun@xxxxxxxxxx>
> > ---
> >   drivers/pci/quirks.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 67 insertions(+)
> >
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index f70692ac79c5..bd6236ea9064 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -3912,6 +3912,71 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> >   	return 0;
> >   }
> >   
> > +#define PCI_DEVICE_ID_HINIC_VF  0x375E
> > +#define HINIC_VF_FLR_TYPE       0x1000
> > +#define HINIC_VF_OP             0xE80
> > +#define HINIC_OPERATION_TIMEOUT 15000
> > +
> > +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> > +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> > +{
> > +	unsigned long timeout;
> > +	void __iomem *bar;
> > +	u16 old_command;
> > +	u32 val;
> > +
> > +	if (probe)
> > +		return 0;
> > +
> > +	bar = pci_iomap(pdev, 0, 0);
> > +	if (!bar)
> > +		return -ENOTTY;
> > +
> > +	pci_read_config_word(pdev, PCI_COMMAND, &old_command);
> > +
> > +	/*
> > +	 * FLR cap bit bit30, FLR ACK bit: bit18, to avoid big-endian conversion
> > +	 * the big-endian bit6, bit10 is directly operated here
> > +	 */
> > +	val = readl(bar + HINIC_VF_FLR_TYPE);
> > +	if (!(val & (1UL << 6))) {
> > +		pci_iounmap(pdev, bar);
> > +		return -ENOTTY;
> > +	}
> > +
> > +	val = readl(bar + HINIC_VF_OP);
> > +	val = val | (1UL << 10);
> > +	writel(val, bar + HINIC_VF_OP);
> > +
> > +	/* Perform the actual device function reset */
> > +	pcie_flr(pdev);
> > +
> > +	pci_write_config_word(pdev, PCI_COMMAND,
> > +			      old_command | PCI_COMMAND_MEMORY);
> > +
> > +	/* Waiting for device reset complete */
> > +	timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
> > +	do {
> > +		val = readl(bar + HINIC_VF_OP);
> > +		if (!(val & (1UL << 10)))
> > +			goto reset_complete;
> > +		msleep(20);
> > +	} while (time_before(jiffies, timeout));
> > +
> > +	val = readl(bar + HINIC_VF_OP);
> > +	if (!(val & (1UL << 10)))
> > +		goto reset_complete;
> > +
> > +	pci_warn(pdev, "Reset dev timeout, flr ack reg: %x\n",
> > +		 be32_to_cpu(val));
> > +
> > +reset_complete:
> > +	pci_write_config_word(pdev, PCI_COMMAND, old_command);
> > +	pci_iounmap(pdev, bar);
> > +
> > +	return 0;
> > +}
> > +
> >   static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> >   	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
> >   		 reset_intel_82599_sfp_virtfn },
> > @@ -3923,6 +3988,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> >   	{ PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
> >   	{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> >   		reset_chelsio_generic_dev },
> > +	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> > +		reset_hinic_vf_dev },
> >   	{ 0 }
> >   };
> >   
> > --
> > 2.17.1
> .