[PATCH v1 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quite similar to the regulator bindings found in "rockchip-pcie-host.txt",
this allows optional regulators to be attached and controlled by the
PCIe RC driver.

Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
---
 .../devicetree/bindings/pci/brcm,stb-pcie.yaml       | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 807694b4f41f..baacc3d7ec87 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -85,6 +85,18 @@ properties:
       minItems: 1
       maxItems: 3
 
+  vpcie12v-supply:
+    description: 12v regulator phandle for the endpoint device
+
+  vpcie3v3-supply:
+    description: 3.3v regulator phandle for the endpoint device
+
+  vpcie1v8-supply:
+    description: 1.8v regulator phandle for the endpoint device
+
+  vpcie0v9-supply:
+    description: 0.9v regulator phandle for the endpoint device
+
 required:
   - reg
   - ranges
-- 
2.17.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux