Changes since v11 [1] and based on pci/master tree [2]: - No functional changes. Tested with aer injection. - Merge RCEC class code and extended capability patch with usage. - Apply same optimization for pci_pcie_type(dev) calls in drivers/pci/pcie/portdrv_pci.c and drivers/pci/pcie/aer.c. (Kuppuswamy Sathyanarayanan) [1] https://lore.kernel.org/linux-pci/20201117191954.1322844-1-sean.v.kelley@xxxxxxxxx/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/ Root Complex Event Collectors (RCEC) provide support for terminating error and PME messages from Root Complex Integrated Endpoints (RCiEPs). An RCEC resides on a Bus in the Root Complex. Multiple RCECs can in fact reside on a single bus. An RCEC will explicitly declare supported RCiEPs through the Root Complex Endpoint Association Extended Capability. (See PCIe 5.0-1, sections 1.3.2.3 (RCiEP), and 7.9.10 (RCEC Ext. Cap.)) The kernel lacks handling for these RCECs and the error messages received from their respective associated RCiEPs. More recently, a new CPU interconnect, Compute eXpress Link (CXL) depends on RCEC capabilities for purposes of error messaging from CXL 1.1 supported RCiEP devices. DocLink: https://www.computeexpresslink.org/ This use case is not limited to CXL. Existing hardware today includes support for RCECs, such as the Denverton microserver product family. Future hardware will be forthcoming. (See Intel Document, Order number: 33061-003US) So services such as AER or PME could be associated with an RCEC driver. In the case of CXL, if an RCiEP (i.e., CXL 1.1 device) is associated with a platform's RCEC it shall signal PME and AER error conditions through that RCEC. Towards the above use cases, add the missing RCEC class and extend the PCIe Root Port and service drivers to allow association of RCiEPs to their respective parent RCEC and facilitate handling of terminating error and PME messages. Tested-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> #non-native/no RCEC Qiuxu Zhuo (3): PCI/RCEC: Bind RCEC devices to the Root Port driver PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR PCI/AER: Add RCEC AER error injection support Sean V Kelley (12): AER: aer_root_reset() non-native handling PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Limit AER resets in pcie_do_recovery() PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/PME: Add pcie_walk_rcec() to RCEC PME handling drivers/pci/pci.h | 29 ++++- drivers/pci/pcie/Makefile | 2 +- drivers/pci/pcie/aer.c | 89 +++++++++++---- drivers/pci/pcie/aer_inject.c | 5 +- drivers/pci/pcie/err.c | 93 +++++++++++----- drivers/pci/pcie/pme.c | 16 ++- drivers/pci/pcie/portdrv_core.c | 9 +- drivers/pci/pcie/portdrv_pci.c | 13 ++- drivers/pci/pcie/rcec.c | 190 ++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 2 + include/linux/pci.h | 5 + include/linux/pci_ids.h | 1 + include/uapi/linux/pci_regs.h | 7 ++ 13 files changed, 393 insertions(+), 68 deletions(-) create mode 100644 drivers/pci/pcie/rcec.c -- 2.29.2
