Hi Richard, Richard Cochran <richardcochran@xxxxxxxxx> writes: > What is a PTM? Why does a PTM have dialogs? Can it talk? > > Forgive my total ignorance! :-) We are talking about PCIe PTM (Precise Time Measurement), basically it's a PTP-like protocol running on the PCIe fabric. The PTM dialogs are a pair of messages: a Request from the endpoint (in my case, the NIC) to the PCIe root (or switch), and a Response from the other side (this message includes the Master Root Time, and the calculated propagation delay). The interface exposed by the NIC I have allows basically to start/stop these PTM dialogs (I was calling them PTM cycles) and to configure the interval between each cycle (~1ms - ~512ms). I also have access to four time stamps: - T1, when the NIC sends the Request message; - T2, when the PCIe root received the Request message; - T3, when the PCIe root sends the Response message; - T4, when the NIC receives the Response message; Actually, I have T1 (on this cycle), T2 (on this and on the previous cycle), 'T4 - T1' (on this and on the previous cycle) and 'T3 - T2' (on the previous cycle). Another thing of note, is that trying to start the PTM dialogs "on demand" syncronously with the ioctl() doesn't seem too reliable, it seems to want to be kept running for a longer time. I think that's it for a "PCIe PTM from a software person" overview :-) Cheers, -- Vinicius
