Fix binding documentation of "ti,syscon-pcie-ctrl" to take phandle with argument. The argument is the register offset within "syscon" used to configure PCIe controller. Link: Link: http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@xxxxxxxxxxxxxx Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- .../devicetree/bindings/pci/ti,j721e-pci-ep.yaml | 12 ++++++++---- .../devicetree/bindings/pci/ti,j721e-pci-host.yaml | 12 ++++++++---- 2 files changed, 16 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index 3ae3e1a2d4b0..e9685c0bdc3e 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -29,9 +29,13 @@ properties: - const: mem ti,syscon-pcie-ctrl: - description: Phandle to the SYSCON entry required for configuring PCIe mode - and link speed. - $ref: /schemas/types.yaml#/definitions/phandle + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. power-domains: maxItems: 1 @@ -80,7 +84,7 @@ examples: <0x00 0x0d000000 0x00 0x00800000>, <0x00 0x10000000 0x00 0x08000000>; reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index ee7a8eade3f6..a3b82992bcfa 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -29,9 +29,13 @@ properties: - const: cfg ti,syscon-pcie-ctrl: - description: Phandle to the SYSCON entry required for configuring PCIe mode - and link speed. - $ref: /schemas/types.yaml#/definitions/phandle + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. power-domains: maxItems: 1 @@ -90,7 +94,7 @@ examples: <0x00 0x0d000000 0x00 0x00800000>, <0x00 0x10000000 0x00 0x00001000>; reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; -- 2.17.1
