I have several systems which have the same problem: The PCIe AER corrected and
uncorrected masks have all the error bits set. This results in the inablility
to test with the aer_inject module & utility on those systems.
Add the 'aer_mask_override' module parameter which will override the corrected
or uncorrected masks for a PCI device. The mask will have the bit
corresponding to the status passed into the aer_inject() function.
After this patch it is possible to successfully use the aer_inject utility
on those PCI slots.
Successfully tested by me on a Dell and Intel whitebox which exhibited the
mask problem.
Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index b3cf622..b4f1a71 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -27,6 +27,10 @@
#include <linux/stddef.h>
#include "aerdrv.h"
+/* Override the existing corrected and uncorrected error masks */
+static int aer_mask_override;
+module_param(aer_mask_override, bool, 0);
+
struct aer_error_inj {
u8 bus;
u8 dev;
@@ -322,7 +326,7 @@ static int aer_inject(struct aer_error_inj *einj)
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever, cor_mask, uncor_mask;
+ u32 sever, cor_mask, uncor_mask, cor_mask_orig, uncor_mask_orig;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -344,6 +348,18 @@ static int aer_inject(struct aer_error_inj *einj)
pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
&uncor_mask);
+ if (aer_mask_override) {
+ cor_mask_orig = cor_mask;
+ cor_mask &= !(einj->cor_status);
+ pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+ cor_mask);
+
+ uncor_mask_orig = uncor_mask;
+ uncor_mask &= !(einj->uncor_status);
+ pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+ uncor_mask);
+ }
+
rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
if (!rp_pos_cap_err) {
ret = -ENOTTY;
@@ -378,14 +394,16 @@ static int aer_inject(struct aer_error_inj *einj)
err->header_log2 = einj->header_log2;
err->header_log3 = einj->header_log3;
- if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
+ if (!aer_mask_override && einj->cor_status &&
+ !(einj->cor_status & ~cor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The correctable error(s) is masked "
"by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
- if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
+ if (!aer_mask_override && einj->uncor_status &&
+ !(einj->uncor_status & ~uncor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The uncorrectable error(s) is masked "
"by device\n");
@@ -425,6 +443,13 @@ static int aer_inject(struct aer_error_inj *einj)
}
spin_unlock_irqrestore(&inject_lock, flags);
+ if (aer_mask_override) {
+ pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+ cor_mask_orig);
+ pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+ uncor_mask_orig);
+ }
+
ret = pci_bus_set_aer_ops(dev->bus);
if (ret)
goto out_put;
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
