Fix the missing clk_disable_unprepare() before return from v3_pci_probe() in the error handling case. Moving the clock enable later to avoid some fixes. Fixes: 6e0832fa432e (" PCI: Collect all native drivers under drivers/pci/controller/") Suggested-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Qinglang Miao <miaoqinglang@xxxxxxxxxx> --- drivers/pci/controller/pci-v3-semi.c | 40 ++++++++++++++++------------ 1 file changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c index 154a53986..90520555b 100644 --- a/drivers/pci/controller/pci-v3-semi.c +++ b/drivers/pci/controller/pci-v3-semi.c @@ -725,18 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev) host->sysdata = v3; v3->dev = dev; - /* Get and enable host clock */ - clk = devm_clk_get(dev, NULL); - if (IS_ERR(clk)) { - dev_err(dev, "clock not found\n"); - return PTR_ERR(clk); - } - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(dev, "unable to enable clock\n"); - return ret; - } - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); v3->base = devm_ioremap_resource(dev, regs); if (IS_ERR(v3->base)) @@ -761,17 +749,31 @@ static int v3_pci_probe(struct platform_device *pdev) if (IS_ERR(v3->config_base)) return PTR_ERR(v3->config_base); + /* Get and enable host clock */ + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) { + dev_err(dev, "clock not found\n"); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "unable to enable clock\n"); + return ret; + } + /* Get and request error IRQ resource */ irq = platform_get_irq(pdev, 0); - if (irq < 0) + if (irq < 0) { + clk_disable_unprepare(clk); return irq; - + } ret = devm_request_irq(dev, irq, v3_irq, 0, "PCIv3 error", v3); if (ret < 0) { dev_err(dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret); + clk_disable_unprepare(clk); return ret; } @@ -814,13 +816,15 @@ static int v3_pci_probe(struct platform_device *pdev) ret = v3_pci_setup_resource(v3, host, win); if (ret) { dev_err(dev, "error setting up resources\n"); + clk_disable_unprepare(clk); return ret; } } ret = v3_pci_parse_map_dma_ranges(v3, np); - if (ret) + if (ret) { + clk_disable_unprepare(clk); return ret; - + } /* * Disable PCI to host IO cycles, enable I/O buffers @3.3V, * set AD_LOW0 to 1 if one of the LB_MAP registers choose @@ -862,8 +866,10 @@ static int v3_pci_probe(struct platform_device *pdev) /* Special Integrator initialization */ if (of_device_is_compatible(np, "arm,integrator-ap-pci")) { ret = v3_integrator_init(v3); - if (ret) + if (ret) { + clk_disable_unprepare(clk); return ret; + } } /* Post-init: enable PCI memory and invalidate (master already on) */ -- 2.23.0