Fix the missing clk_disable_unprepare() before return
from v3_pci_probe() in the error handling case.
Signed-off-by: Qinglang Miao <miaoqinglang@xxxxxxxxxx>
---
drivers/pci/controller/pci-v3-semi.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index 154a53986..e24abc5b4 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -739,8 +739,10 @@ static int v3_pci_probe(struct platform_device *pdev)
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
v3->base = devm_ioremap_resource(dev, regs);
- if (IS_ERR(v3->base))
+ if (IS_ERR(v3->base)) {
+ clk_disable_unprepare(clk);
return PTR_ERR(v3->base);
+ }
/*
* The hardware has a register with the physical base address
* of the V3 controller itself, verify that this is the same
@@ -754,17 +756,22 @@ static int v3_pci_probe(struct platform_device *pdev)
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (resource_size(regs) != SZ_16M) {
dev_err(dev, "config mem is not 16MB!\n");
+ clk_disable_unprepare(clk);
return -EINVAL;
}
v3->config_mem = regs->start;
v3->config_base = devm_ioremap_resource(dev, regs);
- if (IS_ERR(v3->config_base))
+ if (IS_ERR(v3->config_base)) {
+ clk_disable_unprepare(clk);
return PTR_ERR(v3->config_base);
+ }
/* Get and request error IRQ resource */
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0) {
+ clk_disable_unprepare(clk);
return irq;
+ }
ret = devm_request_irq(dev, irq, v3_irq, 0,
"PCIv3 error", v3);
@@ -772,6 +779,7 @@ static int v3_pci_probe(struct platform_device *pdev)
dev_err(dev,
"unable to request PCIv3 error IRQ %d (%d)\n",
irq, ret);
+ clk_disable_unprepare(clk);
return ret;
}
--
2.23.0
