On 29/10/2020 11:09, Pali Rohár wrote:
Hello!
On Wednesday 28 October 2020 18:16:26 Bjorn Helgaas wrote:
[+cc Pali, Marek, Thomas, Jason]
On Wed, Oct 28, 2020 at 04:40:00PM +0000, ™֟☻̭҇ Ѽ ҉ ® wrote:
On 28/10/2020 16:08, Toke Høiland-Jørgensen wrote:
Bjorn Helgaas <helgaas@xxxxxxxxxx> writes:
On Wed, Oct 28, 2020 at 02:36:13PM +0100, Toke Høiland-Jørgensen wrote:
Toke Høiland-Jørgensen <toke@xxxxxxxxxx> writes:
Bjorn Helgaas <helgaas@xxxxxxxxxx> writes:
[+cc vtolkm]
On Tue, Oct 27, 2020 at 04:43:20PM +0100, Toke Høiland-Jørgensen wrote:
Hi everyone
I'm trying to get a mainline kernel to run on my Turris Omnia, and am
having some trouble getting the PCI bus to work correctly. Specifically,
I'm running a 5.10-rc1 kernel (torvalds/master as of this moment), with
the resource request fix[0] applied on top.
The kernel boots fine, and the patch in [0] makes the PCI devices show
up. But I'm still getting initialisation errors like these:
[ 1.632709] pci 0000:01:00.0: BAR 0: error updating (0xe0000004 != 0xffffffff)
[ 1.632714] pci 0000:01:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff)
[ 1.632745] pci 0000:02:00.0: BAR 0: error updating (0xe0200004 != 0xffffffff)
[ 1.632750] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff)
and the WiFi drivers fail to initialise with what appears to me to be
errors related to the bus rather than to the drivers themselves:
[ 3.509878] ath: phy0: Mac Chip Rev 0xfffc0.f is not supported by this driver
[ 3.517049] ath: phy0: Unable to initialize hardware; initialization status: -95
[ 3.524473] ath9k 0000:01:00.0: Failed to initialize device
[ 3.530081] ath9k: probe of 0000:01:00.0 failed with error -95
[ 3.536012] ath10k_pci 0000:02:00.0: of_irq_parse_pci: failed with rc=134
[ 3.543049] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 3.548735] ath10k_pci 0000:02:00.0: can't change power state from D3hot to D0 (config space inaccessible)
[ 3.588592] ath10k_pci 0000:02:00.0: failed to wake up device : -110
[ 3.595098] ath10k_pci: probe of 0000:02:00.0 failed with error -110
lspci looks OK, though:
# lspci
00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter (rev ff)
Does anyone have any clue what could be going on here? Is this a bug, or
did I miss something in my config or other initialisation? I've tried
with both the stock u-boot distributed with the board, and with an
upstream u-boot from latest master; doesn't seem to make any different.
Can you try turning off CONFIG_PCIEASPM? We had a similar recent
report at https://bugzilla.kernel.org/show_bug.cgi?id=209833 but I
don't think we have a fix yet.
Yes! Turning that off does indeed help! Thanks a bunch :)
I have been testing mainline kernel on Turris Omnia with two PCIe
default cards (WLE200 and WLE900) and it worked fine. But I do not know
if I had ASPM enabled or not.
So it is working fine for you when CONFIG_PCIEASPM is disabled and whole
issue is only when CONFIG_PCIEASPM is enabled?
Yes, that is the gist of it.
