DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx> --- V2: * Addressed Jingoo's review comment * Removed saving 'td' bit information in 'dw_pcie' structure drivers/pci/controller/dwc/pcie-designware.c | 8 ++++++-- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index b5e438b70cd5..cbd651b219d2 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pci_addr)); val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; val = upper_32_bits(size - 1) ? val | PCIE_ATU_INCREASE_REGION_SIZE : val; dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, lower_32_bits(pci_addr)); dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(pci_addr)); - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | - PCIE_ATU_FUNC_NUM(func_no)); + val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); /* diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 21dd06831b50..e5449b205c22 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -90,6 +90,7 @@ #define PCIE_ATU_TYPE_IO 0x2 #define PCIE_ATU_TYPE_CFG0 0x4 #define PCIE_ATU_TYPE_CFG1 0x5 +#define PCIE_ATU_TD_SHIFT 8 #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) #define PCIE_ATU_CR2 0x908 #define PCIE_ATU_ENABLE BIT(31) -- 2.17.1
