[PATCH v10 1/5] PCI: Conditionally initialize host bridge native_* members

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If CONFIG_PCIEPORTBUS is not enabled in kernel then initialing
struct pci_host_bridge PCIe specific native_* members to "1" is
incorrect. So protect the PCIe specific member initialization
with CONFIG_PCIEPORTBUS.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
 drivers/pci/probe.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4289030b0fff..756fa60ca708 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -588,12 +588,14 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	 * may implement its own AER handling and use _OSC to prevent the
 	 * OS from interfering.
 	 */
+#ifdef CONFIG_PCIEPORTBUS
 	bridge->native_aer = 1;
 	bridge->native_pcie_hotplug = 1;
-	bridge->native_shpc_hotplug = 1;
 	bridge->native_pme = 1;
-	bridge->native_ltr = 1;
 	bridge->native_dpc = 1;
+#endif
+	bridge->native_ltr = 1;
+	bridge->native_shpc_hotplug = 1;
 
 	device_initialize(&bridge->dev);
 }
-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux