Re: PCI IRQ assignment broken from 4.9 onwards (swizzle?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

Thanks for your answer. Yes, that would be my next step.
I am also hoping the latest kernel doesn't have this issue because
that would mean I would be stuck with version 4.9.
Also I could discover from which patch this stopped working but that
would be very time consuming. If I was to add some debug prints where
should I start? Would this be done in setup-irq.c?
In other words, is "pci_assign_irq" function responsible for all irq
assignments?

Regards,

Billy.



On Wed, Oct 7, 2020 at 5:41 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> [+cc Kishon, linux-omap (maybe this is dra7xx-related?)]
>
> On Wed, Oct 07, 2020 at 10:56:33AM +0100, Billy Araujo wrote:
> > Hi,
> >
> > I have been testing a TI AM57xx board and a NXP iMX8 board with a GPIB
> > PCIe card.
> >
> > TI board (Phytec): https://www.phytec.com/product/phycore-am57x/
> > NXP board (Variscite):
> > https://www.variscite.com/product/system-on-module-som/cortex-a53-krait/var-som-mx8m-mini-nxp-i-mx8m-mini/
> >
> > The GPIB PCIe card has a Texas Instruments XIO2000(A)/XIO2200A PCI
> > Express-to-PCI Bridge.
> >
> > Issue:
> > I have noticed is that on Linux kernel 4.9, the Linux PCI driver
> > assigns correctly an IRQ number:
> >
> > Linux am5728-phycore-rdk 4.9.41-ga962b18-BSP-Yocto-TISDK-AM57xx-PD18.1.0
> > 02:00.0 Communication controller: National Instruments PCIe-GPIB (rev 02)
> >         Subsystem: National Instruments PCIe-GPIB
> >         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> >         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Interrupt: pin A routed to IRQ 470
> >
> > On a newer kernel (this case 4.19), PCI driver doesn't assign an IRQ number.
> >
> > Linux am57xx-phycore-kit 4.19.79-g35d36cd54d #1 SMP PREEMPT Wed Sep 30
> > 14:04:18 UTC 2020 armv7l GNU/Linux
> > 02:00.0 Communication controller: National Instruments PCIe-GPIB (rev 02)
> >         Subsystem: National Instruments PCIe-GPIB
> >         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> >         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Interrupt: pin A routed to IRQ 0
> >
> > Same issue happened on the NXP board, so it seems Linux related. I
> > have tested kernels 4.14, 4.19 and 5.4.3.
> >
> > The IRQ is important to get the legacy interrupts working.
> >
> > Looking at the code there has been some refactoring of how PCI assigns
> > IRQ number when there is a chain of bridges. I am not too familiar
> > with how the code works but I wonder if this has affected how the PCI
> > assignment works.
> >
> > Looking in setup-irq.c:
> >
> > /* If this device is not on the primary bus, we need to figure out
> >    which interrupt pin it will come in on.   We know which slot it
> >    will come in on 'cos that slot is where the bridge is.   Each
> >    time the interrupt line passes through a PCI-PCI bridge we must
> >    apply the swizzle function.  */
> >
> > Line 44: if (hbrg->swizzle_irq)
> >
> > From my understanding, this "if" didn't exist in Linux kernel 4.9. If
> > swizzle function isn't assigned in the newer kernels it just stays as
> > 0.
> >
> > This might be completely unrelated as I said I have no understanding
> > how this code is supposed to work.
> >
> > What I ask is if anyone has experienced any issues similar to this in
> > these more recent kernel versions.
>
> Sorry for the issue, and thanks very much for the report.  Is it
> possible to test a current kernel, e.g., v5.8 or v5.9-rc8?
>
> My guess is this is related to the PCI controller driver; would that
> be pci-dra7xx.c?
>
> > Debug output with the issue:
> >
> > root@am57xx-phycore-kit:~# uname -a
> > Linux am57xx-phycore-kit 4.19.79-g35d36cd54d #1 SMP PREEMPT Wed Sep 30
> > 14:04:18 UTC 2020 armv7l GNU/Linux
> >
> > root@am57xx-phycore-kit:~# lspci -vv
> > 00:00.0 PCI bridge: Texas Instruments Multicore DSP+ARM KeyStone II
> > SOC (rev 01) (prog-if 00 [Normal decode])
> >         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B- DisINTx+
> >         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Latency: 0, Cache Line Size: 64 bytes
> >         Interrupt: pin A routed to IRQ 180
> >         Region 0: Memory at 20100000 (64-bit, non-prefetchable) [size=1M]
> >         Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
> >         I/O behind bridge: None
> >         Memory behind bridge: 20200000-202fffff [size=1M]
> >         Prefetchable memory behind bridge: None
> >         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort+ <SERR- <PERR-
> >         BridgeCtl: Parity+ SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
> >                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >         Capabilities: [40] Power Management version 3
> >                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> > PME(D0+,D1+,D2-,D3hot+,D3cold-)
> >                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >                 Address: 00000000ae15b000  Data: 0000
> >         Capabilities: [70] Express (v2) Root Port (Slot-), MSI 00
> >                 DevCap: MaxPayload 256 bytes, PhantFunc 0
> >                         ExtTag- RBE+
> >                 DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
> >                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >                         MaxPayload 128 bytes, MaxReadReq 512 bytes
> >                 DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> > AuxPwr- TransPend-
> >                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1,
> > Exit Latency L0s <512ns, L1 <64us
> >                         ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
> >                 LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
> >                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >                 LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded)
> >                         TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> >                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> > PMEIntEna+ CRSVisible-
> >                 RootCap: CRSVisible-
> >                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >                 DevCap2: Completion Timeout: Range ABCD, TimeoutDis+,
> > LTR-, OBFF Not Supported ARIFwd-
> >                          AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
> >                 DevCtl2: Completion Timeout: 50us to 50ms,
> > TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> >                          AtomicOpsCtl: ReqEn- EgressBlck-
> >                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> >                          Transmit Margin: Normal Operating Range,
> > EnterModifiedCompliance- ComplianceSOS-
> >                          Compliance De-emphasis: -6dB
> >                 LnkSta2: Current De-emphasis Level: -3.5dB,
> > EqualizationComplete-, EqualizationPhase1-
> >                          EqualizationPhase2-, EqualizationPhase3-,
> > LinkEqualizationRequest-
> >         Capabilities: [100 v2] Advanced Error Reporting
> >                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> > AdvNonFatalErr-
> >                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> > AdvNonFatalErr+
> >                 AERCap: First Error Pointer: 00, ECRCGenCap+
> > ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> >                         MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> >                 HeaderLog: 00000000 00000000 00000000 00000000
> >                 RootCmd: CERptEn+ NFERptEn+ FERptEn+
> >                 RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
> >                          FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
> >                 ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
> >         Kernel driver in use: pcieport
> >
> > 01:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI
> > Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
> >         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> >         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Bus: primary=01, secondary=02, subordinate=02, sec-latency=0
> >         I/O behind bridge: None
> >         Memory behind bridge: 20200000-202fffff [size=1M]
> >         Prefetchable memory behind bridge: None
> >         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> > >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> >         BridgeCtl: Parity+ SERR- NoISA- VGA- VGA16- MAbort+ >Reset- FastB2B+
> >                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >         Capabilities: [50] Power Management version 2
> >                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >                 Bridge: PM- B3+
> >         Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
> >                 Address: 0000000000000000  Data: 0000
> >         Capabilities: [80] Subsystem: Device 0000:0000
> >         Capabilities: [90] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
> >                 DevCap: MaxPayload 512 bytes, PhantFunc 0
> >                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
> > SlotPowerLimit 0.000W
> >                 DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> >                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
> >                         MaxPayload 128 bytes, MaxReadReq 512 bytes
> >                 DevSta: CorrErr- NonFatalErr+ FatalErr- UnsupReq-
> > AuxPwr- TransPend-
> >                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> > Exit Latency L0s <1us, L1 <16us
> >                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> >                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >                 LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
> >                         TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> >         Capabilities: [100 v1] Advanced Error Reporting
> >                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> > AdvNonFatalErr-
> >                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> > AdvNonFatalErr-
> >                 AERCap: First Error Pointer: 00, ECRCGenCap+
> > ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> >                         MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> >                 HeaderLog: 00000000 00000000 00000000 00000000
> >
> > 02:00.0 Communication controller: National Instruments PCIe-GPIB (rev 02)
> >         Subsystem: National Instruments PCIe-GPIB
> >         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> >         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Interrupt: pin A routed to IRQ 0
> >         Region 0: Memory at 20204000 (32-bit, non-prefetchable)
> > [disabled] [size=2K]
> >         Region 1: Memory at 20200000 (32-bit, non-prefetchable)
> > [disabled] [size=16K]



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux