On Friday 02 October 2020 14:37:13 Lorenzo Pieralisi wrote:
> On Wed, Sep 02, 2020 at 04:43:42PM +0200, Pali Rohár wrote:
> > This patch series fixes regression introduced in commit 366697018c9a
> > ("PCI: aardvark: Add PHY support") which caused aardvark driver
> > initialization failure on EspressoBin board with factory version of
> > Arm Trusted Firmware provided by Marvell.
> >
> > Second patch depends on the first patch, so please add appropriate
> > Fixes/Cc:stable@ tags to have both patches correctly backported to
> > stable kernels.
> >
> > I have tested both patches with Marvell ATF firmware ebin-17.10-uart.zip
> > and with upstream ATF+uboot and aardvark was initialized successfully.
> > Without this patch series on ebin-17.10-uart.zip aardvark initialization
> > failed.
> >
> > Pali Rohár (2):
> > phy: marvell: comphy: Convert internal SMCC firmware return codes to
> > errno
> > PCI: aardvark: Fix initialization with old Marvell's Arm Trusted
> > Firmware
> >
> > drivers/pci/controller/pci-aardvark.c | 4 +++-
> > drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++---
> > drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++---
> > 3 files changed, 25 insertions(+), 7 deletions(-)
>
> Applied to pci/aardvark (both patches), thanks.
Ok! For second patch would be needed to put CC:stable line with
specifying prerequisite of first patch as written in document:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
If I understood it correctly, second patch needs following line:
Cc: <stable@xxxxxxxxxxxxxxx> # <commit_id_of_first_path>: comphy: errno return codes
where <commit_id_of_first_path> is commit id of PATCH 1/2.
(correct me if I'm wrong)
Now when first commit has commit id, could you update second commit to
include this information about prerequisite?
