Re: [PATCH 4/5]pci:setup_bus.c Fix warning: variable 'retval' set but not used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 18 Jun 2010 11:48:29 -0700
Yinghai Lu <yinghai@xxxxxxxxxx> wrote:

> On 06/18/2010 10:23 AM, Jesse Barnes wrote:
> > On Tue, 15 Jun 2010 22:33:53 -0700
> > "Justin P. Mattock" <justinmattock@xxxxxxxxx> wrote:
> > 
> >> The below patch fixes a warning message when using gcc 4.6.0
> >>   CC      drivers/pci/setup-bus.o
> >> drivers/pci/setup-bus.c: In function 'pci_assign_unassigned_bridge_resources':
> >> drivers/pci/setup-bus.c:868:6: warning: variable 'retval' set but not used
> >>  
> >>  Signed-off-by: Justin P. Mattock <justinmattock@xxxxxxxxx>
> >>
> >> ---
> >>  drivers/pci/setup-bus.c |    2 --
> >>  1 files changed, 0 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> >> index 19b1113..215590b 100644
> >> --- a/drivers/pci/setup-bus.c
> >> +++ b/drivers/pci/setup-bus.c
> >> @@ -865,7 +865,6 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
> >>  	struct pci_bus *parent = bridge->subordinate;
> >>  	int tried_times = 0;
> >>  	struct resource_list_x head, *list;
> >> -	int retval;
> >>  	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
> >>  				  IORESOURCE_PREFETCH;
> >>  
> >> @@ -874,7 +873,6 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
> >>  again:
> >>  	pci_bus_size_bridges(parent);
> >>  	__pci_bridge_assign_resources(bridge, &head);
> >> -	retval = pci_reenable_device(bridge);
> >>  	pci_set_master(bridge);
> >>  	pci_enable_bridges(parent);
> >>  
> 
> I sent following patch several weeks ago, can you put that in pci-next?
> 
> Subject: [PATCH] pciehp: Enable bridges at last for multiple try assigning
> 
> Found one PCIe Module with several bridges "cold" hotadd doesn't work.
> 
> the root cause:
> 1. BIOS assign small range the parent bridges.
> 2. First try for hotadd only can make some bridges get resource assigned.
> 3. Second will update parent bridge res, get right sizes for all child bridges
>     and devices, but resource for child bridges are not set to HW register.
>     Because first try already enable those bridges, so __pci_bridge_assign_resource
>     skip the setting step.
> 
> So try to move enabling of child bridges to last and only do that one time
> 
> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

Yeah I had a hard time following the changelog, but just looked it
over.  Looks safe, but Justin will still need to check the return value
on pci_reenable_device.

Justin, we don't want a message on every reenable, just on ones that
fail.  So can you protect your printk with if (retval) instead?  You'll
need to refresh it based on my linux-next branch in a few minutes, as
I'm pushing Yinghai's patch now.

-- 
Jesse Barnes, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux