On Fri, 18 Jun 2010 20:05:42 +0300 Maxim Levitsky <maximlevitsky@xxxxxxxxx> wrote: > On Fri, 2010-06-18 at 09:12 -0700, Jesse Barnes wrote: > > On Fri, 18 Jun 2010 15:06:51 +0300 > > Maxim Levitsky <maximlevitsky@xxxxxxxxx> wrote: > > > > > On Wed, 2010-06-09 at 16:05 -0400, Matthew Garrett wrote: > > > > The aspm code will currently set the configured aspm policy before drivers > > > > have had an opportunity to indicate that their hardware doesn't support it. > > > > Unfortunately, putting some hardware in L0 or L1 can result in the hardware > > > > no longer responding to any requests, even after aspm is disabled. It makes > > > > more sense to leave aspm policy at the BIOS defaults at initial setup time, > > > > reconfiguring it after pci_enable_device() is called. This allows the > > > > driver to blacklist individual devices beforehand. > > > > > > > > Signed-off-by: Matthew Garrett <mjg@xxxxxxxxxx> > > > > --- > > > > > > Hi, > > > > > > I recently discovered that my aspire one wireless troubles (card just > > > dies after a while) are caused by ASPM L0S state. > > > The device (AR5001) seems to have a hardware bug, and it also disables > > > L0S in windows driver. > > > > > > Unfortenuly BIOS (news at 11) enables L0S. > > > > > > Its easy to disable ASPM from driver. It just a matter of calling > > > pci_disable_link_state. > > > > > > However, that depends on CONFIG_PCIEASPM. > > > > > > How about making pci_disable_link_state always available or even better, > > > just make CONFIG_PCIEASPM unconditional? > > > > The former is ok with me. Care to post a patch? > It not that simple at first glance. > This functions uses plenty of code from the aspm.c, therefore care > should be taken to do that properly. > > Of course the easy solution is to compile all code in always, and just > disable it by runtime switch (it even exists, aspm_disabled) > Or, another easy solution is to make ath5k depend on CONFIG_PCIEASPM > > What do you think? I do like the idea of getting rid of config options. I just want to make sure we don't regress people, so I need to double check the default behavior, especially for non-x86 and see whether it'll generally be a no-op or not. -- Jesse Barnes, Intel Open Source Technology Center -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
