Re: 2.6.34-rc6 pci bridge problems

["David H. Lynch Jr." <dhlii@xxxxxxxxxx>]

On 05/07/2010 03:18 PM, Bjorn Helgaas wrote:
> >       I responded to Bjorn.
> >      
> Did that bounce?  This email is the first response I've seen.
> I did upgrade laptops recently, so possibly I have a mail issue
> on my end, but I don't see any response on the linux-pci list
> either.
>
> BTW, please keep the list CC'd, because often many people see the
> same problem, and having the discussion on the list makes it more
> likely that Google will find useful clues later.
>    
    No bounce, no clue why you did not get my prior response.
    Not been having any email problems - atleast not that I know of.

>    
> >       The "oops" was actually cause by a stale initramfs.
> >       The PCI problem is still real, but non-fatal.
> >       I sent Bjorn a dmesg [below].
> >      
> I don't see a PCI problem here; can you point out what you're
> concerned about?  There are definitely a few messages that are
> new or changed since 2.6.33, e.g., these:
>
>    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>    pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>   s
> are normal.  These:
>
>    pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
>    pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
>    pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
>
> are also normal, depending on your particular system.  In this case,
> I think the "Failed to receive control..." messages are a bit more
> alarming than they should be.  I think it'd be better if Linux simply
> said something neutral like "platform doesn't support PCIe PME".
>    
[    0.296248] pci 0000:06:00.0: no compatible bridge window for [mem 
0xd2100000-0xd2100fff]
    This is the message that sidetracked me. If it is meaningless - fine.
    But it was the first of only two messages displayed to the screen 
when the system hung.
    The other was about mounting the root filesystem I made the mistake 
of assuming they were related - the root filesystem would not mount 
because a PCI card or bridge was not setup correctly - say maybe the 
disk controller.
    This turned out to be a false assumption.
    I am booting fine now. But I still get this as an error on the 
screen during boot.
    Googling that message sugested that this was a problem already 
fixed in other trees and that the fix had not made it into 
wireless-testing.
    That was why I posted to wireless-testing.
    But I could not find a patch specifically related to that problem.

    Anyway, I am working fine now. I do get this message at boot as it 
it is a serious error.
    But everything appears to work fine.

    If this is a serious problem and not unique to wireless-testing I 
will be happy to help trace it down and kill it.
    I will try pulling 
http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 
and building the latest for my system, but I can not do that until 
tomorrow.









> Thanks again for your report!
>
> Bjorn
>
>
>
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.34-rc6-wl (root@hp-dhlii) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #3 SMP Tue May 4 10:33:25 EDT 2010
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
> [    0.000000]  BIOS-e820: 000000003fe80000 - 000000003ff00000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
> [    0.000000] DMI present.
> [    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==>  (reserved)
> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [    0.000000] last_pfn = 0x3fe80 max_arch_pfn = 0x100000
> [    0.000000] MTRR default type: uncachable
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-BFFFF uncachable
> [    0.000000]   C0000-CFFFF write-protect
> [    0.000000]   D0000-DFFFF uncachable
> [    0.000000]   E0000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 000000000 mask FC0000000 write-back
> [    0.000000]   1 base 03FF00000 mask FFFF00000 uncachable
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==>  (reserved)
> [    0.000000] Scanning 1 areas for low memory corruption
> [    0.000000] modified physical RAM map:
> [    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
> [    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
> [    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
> [    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
> [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
> [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
> [    0.000000]  modified: 0000000000100000 - 000000003fe80000 (usable)
> [    0.000000]  modified: 000000003fe80000 - 000000003ff00000 (ACPI NVS)
> [    0.000000]  modified: 000000003ff00000 - 0000000040000000 (reserved)
> [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
> [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
> [    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
> [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
> [    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
> [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
> [    0.000000] initial memory mapped : 0 - 00c00000
> [    0.000000] found SMP MP-table at [c00f65b0] f65b0
> [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
> [    0.000000]  0000000000 - 0000400000 page 4k
> [    0.000000]  0000400000 - 0037400000 page 2M
> [    0.000000]  0037400000 - 00377fe000 page 4k
> [    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
> [    0.000000] RAMDISK: 2f056000 - 2ff20000
> [    0.000000] ACPI: RSDP 000f6580 00014 (v00 PTLTD )
> [    0.000000] ACPI: RSDT 3fe8b7da 00044 (v01 PTLTD  Capell00 06040000  LTP 00000000)
> [    0.000000] ACPI: FACP 3fe92dee 00074 (v01 HP     NISSAN   06040000 LOHR 0000005A)
> [    0.000000] ACPI: DSDT 3fe8c3ba 06A34 (v01 HP     NISSAN   06040000 INTL 20060608)
> [    0.000000] ACPI: FACS 3fe93fc0 00040
> [    0.000000] ACPI: APIC 3fe92e62 00068 (v01 HP     NISSAN   06040000 LOHR 0000005A)
> [    0.000000] ACPI: HPET 3fe92eca 00038 (v01 HP     NISSAN   06040000 LOHR 0000005A)
> [    0.000000] ACPI: MCFG 3fe92f02 0003C (v01 HP     NISSAN   06040000 LOHR 0000005A)
> [    0.000000] ACPI: BOOT 3fe92fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
> [    0.000000] ACPI: APIC 3fe92f70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
> [    0.000000] ACPI: SSDT 3fe8c1ac 0020A (v01 SataRe SataAhci 00001000 INTL 20060217)
> [    0.000000] ACPI: SSDT 3fe8b81e 004F6 (v01  PmRef    CpuPm 00003000 INTL 20060217)
> [    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
> [    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] 134MB HIGHMEM available.
> [    0.000000] 887MB LOWMEM available.
> [    0.000000]   mapped low ram: 0 - 377fe000
> [    0.000000]   low ram: 0 - 377fe000
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000001 ->  0x00001000
> [    0.000000]   Normal   0x00001000 ->  0x000377fe
> [    0.000000]   HighMem  0x000377fe ->  0x0003fe80
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[3] active PFN ranges
> [    0.000000]     0: 0x00000001 ->  0x00000002
> [    0.000000]     0: 0x00000010 ->  0x0000009f
> [    0.000000]     0: 0x00000100 ->  0x0003fe80
> [    0.000000] On node 0 totalpages: 261648
> [    0.000000] free_area_init_node: node 0, pgdat c0793180, node_mem_map c1001020
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 3952 pages, LIFO batch:0
> [    0.000000]   Normal zone: 1744 pages used for memmap
> [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
> [    0.000000]   HighMem zone: 270 pages used for memmap
> [    0.000000]   HighMem zone: 34164 pages, LIFO batch:7
> [    0.000000] Using APIC driver default
> [    0.000000] ACPI: PM-Timer IO Port: 0x1008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [    0.000000] nr_irqs_gsi: 24
> [    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
> [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
> [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
> [    0.000000] Booting paravirtualized kernel on bare hardware
> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s35860 r0 d21484 u2097152
> [    0.000000] pcpu-alloc: s35860 r0 d21484 u2097152 alloc=1*4194304
> [    0.000000] pcpu-alloc: [0] 0 1
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259602
> [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-rc6-wl root=UUID=88bee5ed-ef49-4911-a450-522157043ec9 ro quiet splash
> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] allocated 5235180 bytes of page_cgroup
> [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [    0.000000] Subtract (53 early reservations)
> [    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
> [    0.000000]   #2 [0000100000 - 00008d7fbc]   TEXT DATA BSS
> [    0.000000]   #3 [002f056000 - 002ff20000]         RAMDISK
> [    0.000000]   #4 [00008d8000 - 00008db12c]             BRK
> [    0.000000]   #5 [00000f65c0 - 0000100000]   BIOS reserved
> [    0.000000]   #6 [00000f65b0 - 00000f65c0]    MP-table mpf
> [    0.000000]   #7 [000009f800 - 000009fd71]   BIOS reserved
> [    0.000000]   #8 [000009feed - 00000f65b0]   BIOS reserved
> [    0.000000]   #9 [000009fd71 - 000009feed]    MP-table mpc
> [    0.000000]   #10 [0000010000 - 0000011000]      TRAMPOLINE
> [    0.000000]   #11 [0000011000 - 0000015000]     ACPI WAKEUP
> [    0.000000]   #12 [0000015000 - 0000016000]         PGTABLE
> [    0.000000]   #13 [0001000000 - 0001001000]         BOOTMEM
> [    0.000000]   #14 [0001001000 - 0001801000]         BOOTMEM
> [    0.000000]   #15 [0001801000 - 0001801004]         BOOTMEM
> [    0.000000]   #16 [0001801040 - 0001801100]         BOOTMEM
> [    0.000000]   #17 [0001801100 - 0001801154]         BOOTMEM
> [    0.000000]   #18 [0001801180 - 0001804180]         BOOTMEM
> [    0.000000]   #19 [0001804180 - 0001804190]         BOOTMEM
> [    0.000000]   #20 [00018041c0 - 0001804dc0]         BOOTMEM
> [    0.000000]   #21 [0001804dc0 - 0001804de5]         BOOTMEM
> [    0.000000]   #22 [0001804e00 - 0001804e27]         BOOTMEM
> [    0.000000]   #23 [0001804e40 - 0001805000]         BOOTMEM
> [    0.000000]   #24 [0001805000 - 0001805040]         BOOTMEM
> [    0.000000]   #25 [0001805040 - 0001805080]         BOOTMEM
> [    0.000000]   #26 [0001805080 - 00018050c0]         BOOTMEM
> [    0.000000]   #27 [00018050c0 - 0001805100]         BOOTMEM
> [    0.000000]   #28 [0001805100 - 0001805140]         BOOTMEM
> [    0.000000]   #29 [0001805140 - 0001805180]         BOOTMEM
> [    0.000000]   #30 [0001805180 - 00018051c0]         BOOTMEM
> [    0.000000]   #31 [00018051c0 - 0001805200]         BOOTMEM
> [    0.000000]   #32 [0001805200 - 0001805240]         BOOTMEM
> [    0.000000]   #33 [0001805240 - 0001805280]         BOOTMEM
> [    0.000000]   #34 [0001805280 - 00018052c0]         BOOTMEM
> [    0.000000]   #35 [00018052c0 - 0001805300]         BOOTMEM
> [    0.000000]   #36 [0001805300 - 0001805340]         BOOTMEM
> [    0.000000]   #37 [0001805340 - 0001805350]         BOOTMEM
> [    0.000000]   #38 [0001805380 - 0001805390]         BOOTMEM
> [    0.000000]   #39 [00018053c0 - 0001805426]         BOOTMEM
> [    0.000000]   #40 [0001805440 - 00018054a6]         BOOTMEM
> [    0.000000]   #41 [0001c00000 - 0001c0e000]         BOOTMEM
> [    0.000000]   #42 [0001e00000 - 0001e0e000]         BOOTMEM
> [    0.000000]   #43 [00018074c0 - 00018074c4]         BOOTMEM
> [    0.000000]   #44 [0001807500 - 0001807504]         BOOTMEM
> [    0.000000]   #45 [0001807540 - 0001807548]         BOOTMEM
> [    0.000000]   #46 [0001807580 - 0001807588]         BOOTMEM
> [    0.000000]   #47 [00018075c0 - 0001807668]         BOOTMEM
> [    0.000000]   #48 [0001807680 - 00018076e8]         BOOTMEM
> [    0.000000]   #49 [0001807700 - 000180b700]         BOOTMEM
> [    0.000000]   #50 [000180b700 - 000188b700]         BOOTMEM
> [    0.000000]   #51 [000188b700 - 00018cb700]         BOOTMEM
> [    0.000000]   #52 [0001e0e000 - 000230c1ec]         BOOTMEM
> [    0.000000] Initializing HighMem for node 0 (000377fe:0003fe80)
> [    0.000000] Memory: 1009140k/1047040k available (4667k kernel code, 37452k reserved, 2106k data, 660k init, 137736k highmem)
> [    0.000000] virtual kernel memory layout:
> [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
> [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
> [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
> [    0.000000]       .init : 0xc079e000 - 0xc0843000   ( 660 kB)
> [    0.000000]       .data : 0xc058eeb9 - 0xc079d708   (2106 kB)
> [    0.000000]       .text : 0xc0100000 - 0xc058eeb9   (4667 kB)
> [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:2304 nr_irqs:424
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] hpet clockevent registered
> [    0.000000] Fast TSC calibration using PIT
> [    0.000000] Detected 1828.770 MHz processor.
> [    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.54 BogoMIPS (lpj=7315080)
> [    0.004046] Security Framework initialized
> [    0.004054] SELinux:  Disabled at boot.
> [    0.004069] Mount-cache hash table entries: 512
> [    0.004289] Initializing cgroup subsys ns
> [    0.004296] Initializing cgroup subsys cpuacct
> [    0.004305] Initializing cgroup subsys memory
> [    0.004321] Initializing cgroup subsys devices
> [    0.004325] Initializing cgroup subsys freezer
> [    0.004330] Initializing cgroup subsys net_cls
> [    0.004368] CPU: Physical Processor ID: 0
> [    0.004371] CPU: Processor Core ID: 0
> [    0.004378] mce: CPU supports 6 MCE banks
> [    0.004392] CPU0: Thermal monitoring handled by SMI
> [    0.004398] using mwait in idle threads.
> [    0.004409] Performance Events: Core2 events, Intel PMU driver.
> [    0.004425] ... version:                2
> [    0.004428] ... bit width:              40
> [    0.004432] ... generic registers:      2
> [    0.004436] ... value mask:             000000ffffffffff
> [    0.004440] ... max period:             000000007fffffff
> [    0.004444] ... fixed-purpose events:   3
> [    0.004448] ... event mask:             0000000700000003
> [    0.004456] Checking 'hlt' instruction... OK.
> [    0.025241] ACPI: Core revision 20100121
> [    0.044015] ftrace: converting mcount calls to 0f 1f 44 00 00
> [    0.044023] ftrace: allocating 19561 entries in 39 pages
> [    0.052079] Enabling APIC mode:  Flat.  Using 1 I/O APICs
> [    0.052500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.093309] CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 02
> [    0.096000] Booting Node   0, Processors  #1 Ok.
> [    0.008000] Initializing CPU#1
> [    0.008000] CPU1: Thermal monitoring handled by SMI
> [    0.184024] Brought up 2 CPUs
> [    0.184030] Total of 2 processors activated (7314.99 BogoMIPS).
> [    0.185103] devtmpfs: initialized
> [    0.185670] regulator: core version 0.5
> [    0.185713] Time: 23:34:46  Date: 05/06/10
> [    0.185781] NET: Registered protocol family 16
> [    0.185999] EISA bus registered
> [    0.186015] ACPI: bus type pci registered
> [    0.186148] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [    0.186156] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [    0.186160] PCI: Using MMCONFIG for extended config space
> [    0.186164] PCI: Using configuration type 1 for base access
> [    0.188063] bio: create slab<bio-0>  at 0
> [    0.190736] ACPI: EC: Look up EC in DSDT
> [    0.197478] ACPI: BIOS _OSI(Linux) query ignored
> [    0.199272] ACPI: SSDT 3fe8bf75 001A3 (v01  PmRef  Cpu0Ist 00003000 INTL 20060217)
> [    0.200326] ACPI: SSDT 3fe8bd14 001DC (v01  PmRef  Cpu0Cst 00003001 INTL 20060217)
> [    0.201778] ACPI: SSDT 3fe8c118 00094 (v01  PmRef  Cpu1Ist 00003000 INTL 20060217)
> [    0.202728] ACPI: SSDT 3fe8bef0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060217)
> [    0.203909] ACPI: Interpreter enabled
> [    0.203939] ACPI: (supports S0 S3 S4 S5)
> [    0.203986] ACPI: Using IOAPIC for interrupt routing
> [    0.273700] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
> [    0.276186] ACPI: No dock devices found.
> [    0.276194] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [    0.277171] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [    0.279052] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
> [    0.279060] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
> [    0.279066] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> [    0.279073] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
> [    0.279078] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
> [    0.279084] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
> [    0.279090] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
> [    0.279250] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [    0.279257] pci 0000:00:01.0: PME# disabled
> [    0.279379] pci 0000:00:1b.0: reg 10: [mem 0xd2400000-0xd2403fff 64bit]
> [    0.279471] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.279479] pci 0000:00:1b.0: PME# disabled
> [    0.279624] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [    0.279633] pci 0000:00:1c.0: PME# disabled
> [    0.279780] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [    0.279788] pci 0000:00:1c.1: PME# disabled
> [    0.279935] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [    0.279943] pci 0000:00:1c.2: PME# disabled
> [    0.280055] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
> [    0.280152] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
> [    0.280248] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
> [    0.280344] pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
> [    0.280435] pci 0000:00:1d.7: reg 10: [mem 0xd2404000-0xd24043ff]
> [    0.280529] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [    0.280538] pci 0000:00:1d.7: PME# disabled
> [    0.280766] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
> [    0.280775] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
> [    0.280858] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
> [    0.280871] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
> [    0.280884] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
> [    0.280897] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
> [    0.280910] pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
> [    0.280998] pci 0000:00:1f.2: reg 10: [io  0x18c8-0x18cf]
> [    0.281012] pci 0000:00:1f.2: reg 14: [io  0x18ac-0x18af]
> [    0.281025] pci 0000:00:1f.2: reg 18: [io  0x18c0-0x18c7]
> [    0.281037] pci 0000:00:1f.2: reg 1c: [io  0x18a8-0x18ab]
> [    0.281050] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
> [    0.281062] pci 0000:00:1f.2: reg 24: [mem 0xd2404400-0xd24047ff]
> [    0.281120] pci 0000:00:1f.2: PME# supported from D3hot
> [    0.281129] pci 0000:00:1f.2: PME# disabled
> [    0.281216] pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
> [    0.281353] pci 0000:01:00.0: reg 10: [mem 0xd1000000-0xd1ffffff]
> [    0.281370] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.281387] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd0ffffff 64bit]
> [    0.281398] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
> [    0.281409] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
> [    0.281461] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [    0.281468] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
> [    0.281476] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
> [    0.281486] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.281575] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [    0.281584] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0000] (disabled)
> [    0.281594] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
> [    0.281607] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [    0.281696] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [    0.281705] pci 0000:00:1c.1:   bridge window [io  0x0000-0x0000] (disabled)
> [    0.281714] pci 0000:00:1c.1:   bridge window [mem 0x00000000-0x000fffff] (disabled)
> [    0.281727] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [    0.281966] pci 0000:06:00.0: reg 10: [mem 0xd2100000-0xd2100fff]
> [    0.282251] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
> [    0.282268] pci 0000:06:00.0: PME# disabled
> [    0.282342] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
> [    0.282350] pci 0000:00:1c.2:   bridge window [io  0x0000-0x0000] (disabled)
> [    0.282360] pci 0000:00:1c.2:   bridge window [mem 0x00000000-0x000fffff] (disabled)
> [    0.282373] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [    0.282482] pci 0000:08:06.0: reg 10: [mem 0xd2004000-0xd2004fff]
> [    0.282522] pci 0000:08:06.0: supports D1 D2
> [    0.282527] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.282536] pci 0000:08:06.0: PME# disabled
> [    0.282593] pci 0000:08:06.1: reg 10: [mem 0xd2007000-0xd20077ff]
> [    0.282607] pci 0000:08:06.1: reg 14: [mem 0xd2000000-0xd2003fff]
> [    0.282689] pci 0000:08:06.1: supports D1 D2
> [    0.282694] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot
> [    0.282703] pci 0000:08:06.1: PME# disabled
> [    0.282756] pci 0000:08:06.2: reg 10: [mem 0xd2005000-0xd2005fff]
> [    0.282842] pci 0000:08:06.2: supports D1 D2
> [    0.282846] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot
> [    0.282855] pci 0000:08:06.2: PME# disabled
> [    0.282908] pci 0000:08:06.3: reg 10: [mem 0xd2007800-0xd20078ff]
> [    0.282993] pci 0000:08:06.3: supports D1 D2
> [    0.282997] pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot
> [    0.283006] pci 0000:08:06.3: PME# disabled
> [    0.283069] pci 0000:08:08.0: reg 10: [mem 0xd2006000-0xd2006fff]
> [    0.283083] pci 0000:08:08.0: reg 14: [io  0x3000-0x303f]
> [    0.283160] pci 0000:08:08.0: supports D1 D2
> [    0.283164] pci 0000:08:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.283173] pci 0000:08:08.0: PME# disabled
> [    0.283240] pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode)
> [    0.283249] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
> [    0.283258] pci 0000:00:1e.0:   bridge window [mem 0xd2000000-0xd20fffff]
> [    0.283271] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [    0.283277] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
> [    0.283282] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
> [    0.283355] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:08 [bus 08-09]
> [    0.283402] pci_bus 0000:00: on NUMA node 0
> [    0.283411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.283877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> [    0.284088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [    0.284257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [    0.284425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> [    0.284657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [    0.293379] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [    0.293583] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
> [    0.293780] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> [    0.293978] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [    0.294186] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
> [    0.294382] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [    0.294580] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
> [    0.294776] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
> [    0.295004] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [    0.295019] vgaarb: loaded
> [    0.295227] SCSI subsystem initialized
> [    0.295333] libata version 3.00 loaded.
> [    0.295433] usbcore: registered new interface driver usbfs
> [    0.295459] usbcore: registered new interface driver hub
> [    0.295510] usbcore: registered new device driver usb
> [    0.295829] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
> [    0.296113] ACPI: WMI: Mapper loaded
> [    0.296117] PCI: Using ACPI for IRQ routing
> [    0.296122] PCI: pci_cache_line_size set to 64 bytes
> [    0.296248] pci 0000:06:00.0: no compatible bridge window for [mem 0xd2100000-0xd2100fff]
> [    0.296467] reserve RAM buffer: 0000000000002000 - 000000000000ffff
> [    0.296473] reserve RAM buffer: 000000000009f800 - 000000000009ffff
> [    0.296478] reserve RAM buffer: 000000003fe80000 - 000000003fffffff
> [    0.296625] NetLabel: Initializing
> [    0.296630] NetLabel:  domain hash size = 128
> [    0.296633] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.296656] NetLabel:  unlabeled traffic allowed by default
> [    0.296712] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [    0.296722] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [    0.296733] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [    0.300043] Switching to clocksource tsc
> [    0.304484] pnp: PnP ACPI init
> [    0.304503] ACPI: bus type pnp registered
> [    0.329008] pnp: PnP ACPI: found 10 devices
> [    0.329013] ACPI: ACPI bus type pnp unregistered
> [    0.329021] PnPBIOS: Disabled by ACPI PNP
> [    0.329040] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
> [    0.329047] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
> [    0.329053] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> [    0.329060] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> [    0.329066] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [    0.329072] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    0.329078] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
> [    0.329085] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
> [    0.329099] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
> [    0.329113] system 00:06: [io  0x0800-0x080f] has been reserved
> [    0.329119] system 00:06: [io  0x1000-0x107f] has been reserved
> [    0.329125] system 00:06: [io  0x1180-0x11bf] has been reserved
> [    0.329131] system 00:06: [io  0x1640-0x164f] has been reserved
> [    0.364018] PCI: max bus depth: 2 pci_try_num: 3
> [    0.364115] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
> [    0.364122] pci 0000:00:1c.0: BAR 14: assigned [mem 0x44000000-0x441fffff]
> [    0.364129] pci 0000:00:1c.0: BAR 15: assigned [mem 0x44200000-0x443fffff 64bit pref]
> [    0.364136] pci 0000:00:1c.1: BAR 14: assigned [mem 0x44400000-0x445fffff]
> [    0.364142] pci 0000:00:1c.1: BAR 15: assigned [mem 0x44600000-0x447fffff 64bit pref]
> [    0.364149] pci 0000:00:1c.2: BAR 14: assigned [mem 0x44800000-0x449fffff]
> [    0.364156] pci 0000:00:1c.2: BAR 15: assigned [mem 0x44a00000-0x44bfffff 64bit pref]
> [    0.364163] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
> [    0.364170] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
> [    0.364176] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
> [    0.364184] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
> [    0.364189] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [    0.364195] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
> [    0.364204] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
> [    0.364211] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.364221] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [    0.364227] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
> [    0.364238] pci 0000:00:1c.0:   bridge window [mem 0x44000000-0x441fffff]
> [    0.364247] pci 0000:00:1c.0:   bridge window [mem 0x44200000-0x443fffff 64bit pref]
> [    0.364260] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [    0.364267] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
> [    0.364278] pci 0000:00:1c.1:   bridge window [mem 0x44400000-0x445fffff]
> [    0.364286] pci 0000:00:1c.1:   bridge window [mem 0x44600000-0x447fffff 64bit pref]
> [    0.364300] pci 0000:06:00.0: BAR 0: assigned [mem 0x44800000-0x44800fff]
> [    0.364359] pci 0000:06:00.0: BAR 0: set to [mem 0x44800000-0x44800fff] (PCI address [0x44800000-0x44800fff]
> [    0.364365] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
> [    0.364372] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
> [    0.364382] pci 0000:00:1c.2:   bridge window [mem 0x44800000-0x449fffff]
> [    0.364392] pci 0000:00:1c.2:   bridge window [mem 0x44a00000-0x44bfffff 64bit pref]
> [    0.364408] pci 0000:08:06.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
> [    0.364415] pci 0000:08:06.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
> [    0.364421] pci 0000:08:06.0: BAR 13: assigned [io  0x3400-0x34ff]
> [    0.364427] pci 0000:08:06.0: BAR 14: assigned [io  0x3800-0x38ff]
> [    0.364432] pci 0000:08:06.0: CardBus bridge to [bus 09-0c]
> [    0.364437] pci 0000:08:06.0:   bridge window [io  0x3400-0x34ff]
> [    0.364445] pci 0000:08:06.0:   bridge window [io  0x3800-0x38ff]
> [    0.364454] pci 0000:08:06.0:   bridge window [mem 0x40000000-0x43ffffff pref]
> [    0.364464] pci 0000:08:06.0:   bridge window [mem 0x48000000-0x4bffffff]
> [    0.364472] pci 0000:00:1e.0: PCI bridge to [bus 08-09]
> [    0.364479] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
> [    0.364489] pci 0000:00:1e.0:   bridge window [mem 0xd2000000-0xd20fffff]
> [    0.364498] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
> [    0.364522]   alloc irq_desc for 16 on node -1
> [    0.364526]   alloc kstat_irqs on node -1
> [    0.364536] pci 0000:00:01.0: PCI INT A ->  GSI 16 (level, low) ->  IRQ 16
> [    0.364544] pci 0000:00:01.0: setting latency timer to 64
> [    0.364560] pci 0000:00:1c.0: enabling device (0100 ->  0103)
> [    0.364567]   alloc irq_desc for 17 on node -1
> [    0.364570]   alloc kstat_irqs on node -1
> [    0.364578] pci 0000:00:1c.0: PCI INT A ->  GSI 17 (level, low) ->  IRQ 17
> [    0.364588] pci 0000:00:1c.0: setting latency timer to 64
> [    0.364604] pci 0000:00:1c.1: enabling device (0100 ->  0103)
> [    0.364612] pci 0000:00:1c.1: PCI INT B ->  GSI 16 (level, low) ->  IRQ 16
> [    0.364623] pci 0000:00:1c.1: setting latency timer to 64
> [    0.364639] pci 0000:00:1c.2: enabling device (0100 ->  0103)
> [    0.364646]   alloc irq_desc for 18 on node -1
> [    0.364650]   alloc kstat_irqs on node -1
> [    0.364657] pci 0000:00:1c.2: PCI INT C ->  GSI 18 (level, low) ->  IRQ 18
> [    0.364668] pci 0000:00:1c.2: setting latency timer to 64
> [    0.364682] pci 0000:00:1e.0: setting latency timer to 64
> [    0.364700] pci 0000:08:06.0: PCI INT A ->  GSI 18 (level, low) ->  IRQ 18
> [    0.364712] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
> [    0.364717] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
> [    0.364722] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
> [    0.364728] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
> [    0.364734] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.364739] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
> [    0.364744] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff]
> [    0.364750] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref]
> [    0.364755] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
> [    0.364760] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff]
> [    0.364766] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref]
> [    0.364771] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
> [    0.364776] pci_bus 0000:06: resource 1 [mem 0x44800000-0x449fffff]
> [    0.364782] pci_bus 0000:06: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref]
> [    0.364787] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
> [    0.364792] pci_bus 0000:08: resource 1 [mem 0xd2000000-0xd20fffff]
> [    0.364798] pci_bus 0000:08: resource 2 [mem 0x40000000-0x43ffffff pref]
> [    0.364803] pci_bus 0000:08: resource 4 [io  0x0000-0xffff]
> [    0.364808] pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
> [    0.364813] pci_bus 0000:09: resource 0 [io  0x3400-0x34ff]
> [    0.364818] pci_bus 0000:09: resource 1 [io  0x3800-0x38ff]
> [    0.364823] pci_bus 0000:09: resource 2 [mem 0x40000000-0x43ffffff pref]
> [    0.364828] pci_bus 0000:09: resource 3 [mem 0x48000000-0x4bffffff]
> [    0.364878] NET: Registered protocol family 2
> [    0.364995] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [    0.365433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [    0.366116] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [    0.366448] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.366452] TCP reno registered
> [    0.366458] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [    0.366471] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [    0.366609] NET: Registered protocol family 1
> [    1.964017] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> [    1.964183] pci 0000:01:00.0: Boot video device
> [    1.964278] pci 0000:08:08.0: Firmware left e100 interrupts enabled; disabling
> [    1.964289] PCI: CLS 64 bytes, default 64
> [    1.964387] Trying to unpack rootfs image as initramfs...
> [    2.698993] Freeing initrd memory: 15144k freed
> [    2.708848] Simple Boot Flag at 0x36 set to 0x1
> [    2.709218] cpufreq-nforce2: No nForce2 chipset.
> [    2.709272] Scanning for low memory corruption every 60 seconds
> [    2.709548] audit: initializing netlink socket (disabled)
> [    2.709571] type=2000 audit(1273188888.708:1): initialized
> [    2.729993] highmem bounce pool size: 64 pages
> [    2.730003] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [    2.732992] VFS: Disk quotas dquot_6.5.2
> [    2.733100] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    2.734230] fuse init (API version 7.13)
> [    2.734409] msgmni has been set to 1731
> [    2.734809] alg: No test for stdrng (krng)
> [    2.734913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [    2.734920] io scheduler noop registered
> [    2.734924] io scheduler deadline registered
> [    2.735004] io scheduler cfq registered (default)
> [    2.735220] pcieport 0000:00:01.0: setting latency timer to 64
> [    2.735271]   alloc irq_desc for 24 on node -1
> [    2.735275]   alloc kstat_irqs on node -1
> [    2.735291] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
> [    2.735405] pcieport 0000:00:1c.0: setting latency timer to 64
> [    2.735472]   alloc irq_desc for 25 on node -1
> [    2.735476]   alloc kstat_irqs on node -1
> [    2.735491] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
> [    2.735655] pcieport 0000:00:1c.1: setting latency timer to 64
> [    2.735722]   alloc irq_desc for 26 on node -1
> [    2.735726]   alloc kstat_irqs on node -1
> [    2.735741] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
> [    2.735902] pcieport 0000:00:1c.2: setting latency timer to 64
> [    2.735968]   alloc irq_desc for 27 on node -1
> [    2.735972]   alloc kstat_irqs on node -1
> [    2.735986] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
> [    2.736196] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
> [    2.736211] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
> [    2.736220] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
> [    2.736229] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
> [    2.736236] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
> [    2.736243] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
> [    2.736252] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
> [    2.736258] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
> [    2.736265] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
> [    2.736274] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
> [    2.736280] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support
> [    2.736286] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
> [    2.736329] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    2.736524] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [    2.739896] ACPI: AC Adapter [ACAD] (on-line)
> [    2.740055] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [    2.740129] ACPI: Lid Switch [LID]
> [    2.740223] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [    2.740229] ACPI: Power Button [PWRB]
> [    2.740339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [    2.740344] ACPI: Power Button [PWRF]
> [    2.740439] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
> [    2.740444] ACPI: Sleep Button [SLPF]
> [    2.740457] ACPI Error: Could not enable SleepButton event (20100121/evxfevnt-193)
> [    2.740467] ACPI Warning: Could not enable fixed event 3 (20100121/evxface-146)
> [    2.740539] button: probe of LNXSLPBN:00 failed with error -22
> [    2.741203] Marking TSC unstable due to TSC halts in idle
> [    2.741274] Switching to clocksource hpet
> [    2.786088] thermal LNXTHERM:01: registered as thermal_zone0
> [    2.786107] ACPI: Thermal Zone [TZ01] (56 C)
> [    2.786381] thermal LNXTHERM:02: registered as thermal_zone1
> [    2.786399] ACPI: Thermal Zone [TZ02] (27 C)
> [    2.786554] isapnp: Scanning for PnP cards...
> [    2.816069] ACPI: Battery Slot [BAT1] (battery absent)
> [    3.141298] isapnp: No Plug&  Play device found
> [    3.144149] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    3.147109] brd: module loaded
> [    3.148193] loop: module loaded
> [    3.148426] ata_piix 0000:00:1f.1: version 2.13
> [    3.148449]   alloc irq_desc for 19 on node -1
> [    3.148453]   alloc kstat_irqs on node -1
> [    3.148464] ata_piix 0000:00:1f.1: PCI INT B ->  GSI 19 (level, low) ->  IRQ 19
> [    3.148526] ata_piix 0000:00:1f.1: setting latency timer to 64
> [    3.148648] scsi0 : ata_piix
> [    3.148783] scsi1 : ata_piix
> [    3.149874] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
> [    3.149881] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
> [    3.150138] ata2: port disabled. ignoring.
> [    3.150587] Fixed MDIO Bus: probed
> [    3.150656] PPP generic driver version 2.4.2
> [    3.150729] tun: Universal TUN/TAP device driver, 1.6
> [    3.150734] tun: (C) 1999-2004 Max Krasnyansky<maxk@xxxxxxxxxxxx>
> [    3.150885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    3.150920]   alloc irq_desc for 23 on node -1
> [    3.150924]   alloc kstat_irqs on node -1
> [    3.150934] ehci_hcd 0000:00:1d.7: PCI INT A ->  GSI 23 (level, low) ->  IRQ 23
> [    3.150954] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [    3.150961] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [    3.151029] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [    3.151058] ehci_hcd 0000:00:1d.7: using broken periodic workaround
> [    3.151077] ehci_hcd 0000:00:1d.7: debug port 1
> [    3.154981] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
> [    3.155005] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000
> [    3.169023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [    3.169246] hub 1-0:1.0: USB hub found
> [    3.169256] hub 1-0:1.0: 8 ports detected
> [    3.169415] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    3.169446] uhci_hcd: USB Universal Host Controller Interface driver
> [    3.169483] uhci_hcd 0000:00:1d.0: PCI INT A ->  GSI 23 (level, low) ->  IRQ 23
> [    3.169495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [    3.169501] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [    3.169567] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [    3.169603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
> [    3.169829] hub 2-0:1.0: USB hub found
> [    3.169838] hub 2-0:1.0: 2 ports detected
> [    3.169958] uhci_hcd 0000:00:1d.1: PCI INT B ->  GSI 19 (level, low) ->  IRQ 19
> [    3.169969] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [    3.169975] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [    3.170040] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> [    3.170088] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
> [    3.170314] hub 3-0:1.0: USB hub found
> [    3.170325] hub 3-0:1.0: 2 ports detected
> [    3.170443] uhci_hcd 0000:00:1d.2: PCI INT C ->  GSI 18 (level, low) ->  IRQ 18
> [    3.170454] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [    3.170461] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [    3.170522] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [    3.170569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
> [    3.170798] hub 4-0:1.0: USB hub found
> [    3.170807] hub 4-0:1.0: 2 ports detected
> [    3.170923] uhci_hcd 0000:00:1d.3: PCI INT D ->  GSI 16 (level, low) ->  IRQ 16
> [    3.170934] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [    3.170940] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [    3.171016] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [    3.171066] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
> [    3.171289] hub 5-0:1.0: USB hub found
> [    3.171298] hub 5-0:1.0: 2 ports detected
> [    3.171529] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [    3.193645] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    3.193657] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    3.193857] mice: PS/2 mouse device common for all mice
> [    3.194973] rtc_cmos 00:09: RTC can wake from S4
> [    3.195042] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
> [    3.195084] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [    3.195274] device-mapper: uevent: version 1.0.3
> [    3.195461] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
> [    3.195595] device-mapper: multipath: version 1.1.1 loaded
> [    3.195600] device-mapper: multipath round-robin: version 1.0.0 loaded
> [    3.195811] EISA: Probing bus 0 at eisa.0
> [    3.195821] Cannot allocate resource for EISA slot 1
> [    3.195826] Cannot allocate resource for EISA slot 2
> [    3.195830] Cannot allocate resource for EISA slot 3
> [    3.195834] Cannot allocate resource for EISA slot 4
> [    3.195839] Cannot allocate resource for EISA slot 5
> [    3.195843] Cannot allocate resource for EISA slot 6
> [    3.195858] EISA: Detected 0 cards.
> [    3.196143] cpuidle: using governor ladder
> [    3.196374] cpuidle: using governor menu
> [    3.197080] TCP cubic registered
> [    3.197400] NET: Registered protocol family 10
> [    3.198162] lo: Disabled Privacy Extensions
> [    3.198687] NET: Registered protocol family 17
> [    3.199344] Using IPI No-Shortcut mode
> [    3.199437] PM: Resume from disk failed.
> [    3.199450] registered taskstats version 1
> [    3.199875]   Magic number: 10:912:604
> [    3.199962] rtc_cmos 00:09: setting system clock to 2010-05-06 23:34:49 UTC (1273188889)
> [    3.199966] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [    3.199968] EDD information not available.
> [    3.211526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> [    3.312450] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
> [    3.328358] ata1.00: configured for MWDMA2
> [    3.334172] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
> [    3.345991] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [    3.345995] Uniform CD-ROM driver Revision: 3.20
> [    3.346100] sr 0:0:0:0: Attached scsi CD-ROM sr0
> [    3.346158] sr 0:0:0:0: Attached scsi generic sg0 type 5
> [    3.346243] Freeing unused kernel memory: 660k freed
> [    3.346670] Write protecting the kernel text: 4668k
> [    3.346734] Write protecting the kernel read-only data: 1820k
> [    3.380584] udev: starting version 151
> [    3.483273] Linux agpgart interface v0.103
> [    3.524730] [drm] Initialized drm 1.1.0 20060810
> [    3.538507] ahci 0000:00:1f.2: version 3.0
> [    3.538530] ahci 0000:00:1f.2: PCI INT B ->  GSI 19 (level, low) ->  IRQ 19
> [    3.538584]   alloc irq_desc for 28 on node -1
> [    3.538587]   alloc kstat_irqs on node -1
> [    3.538600] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
> [    3.538686] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
> [    3.538691] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
> [    3.538697] ahci 0000:00:1f.2: setting latency timer to 64
> [    3.538883] scsi2 : ahci
> [    3.539018] scsi3 : ahci
> [    3.539138] scsi4 : ahci
> [    3.539250] scsi5 : ahci
> [    3.539420] ata3: SATA max UDMA/133 abar m1024@0xd2404400 port 0xd2404500 irq 28
> [    3.539423] ata4: DUMMY
> [    3.539427] ata5: SATA max UDMA/133 abar m1024@0xd2404400 port 0xd2404600 irq 28
> [    3.539429] ata6: DUMMY
> [    3.540835] ohci1394 0000:08:06.1: PCI INT B ->  GSI 19 (level, low) ->  IRQ 19
> [    3.573892] acpi device:01: registered as cooling_device2
> [    3.574029] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
> [    3.574085] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
> [    3.597117] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[d2007000-d20077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> [    3.856073] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    3.856104] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    3.856686] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [    3.856692] ata3.00: ATA-7: FUJITSU MHV2100BH, 892C, max UDMA/100
> [    3.856695] ata3.00: 195371568 sectors, multi 16: LBA48
> [    3.859286] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [    3.859317] ata3.00: configured for UDMA/100
> [    3.860041] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [    3.863583] ata5.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
> [    3.863586] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [    3.865071] usb 4-1: new full speed USB device using uhci_hcd and address 2
> [    3.867634] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [    3.871203] ata5.00: configured for UDMA/133
> [    3.872180] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHV2100B 892C PQ: 0 ANSI: 5
> [    3.872360] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [    3.872454] sd 2:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
> [    3.872515] sd 2:0:0:0: [sda] Write Protect is off
> [    3.872518] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    3.872545] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    3.872707]  sda:
> [    3.884142] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HM320JI  2SS0 PQ: 0 ANSI: 5
> [    3.884280] sd 4:0:0:0: Attached scsi generic sg2 type 0
> [    3.884366] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [    3.884433] sd 4:0:0:0: [sdb] Write Protect is off
> [    3.884436] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    3.884464] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    3.884617]  sdb: sdb1
> [    3.907025] sd 4:0:0:0: [sdb] Attached SCSI disk
> [    3.955808]  sda1 sda2 sda3 sda4
> [    3.979118]  sda3:<openbsd: sda5 sda6bad subpartition - ignored
> [    3.979123] bad subpartition - ignored
> [    3.979125] bad subpartition - ignored
> [    3.979127]>
> [    3.979553] sd 2:0:0:0: [sda] Attached SCSI disk
> [    3.982663] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [    3.982666] e100: Copyright(c) 1999-2006 Intel Corporation
> [    3.982714]   alloc irq_desc for 20 on node -1
> [    3.982716]   alloc kstat_irqs on node -1
> [    3.982725] e100 0000:08:08.0: PCI INT A ->  GSI 20 (level, low) ->  IRQ 20
> [    4.009817] nouveau 0000:01:00.0: PCI INT A ->  GSI 16 (level, low) ->  IRQ 16
> [    4.009823] nouveau 0000:01:00.0: setting latency timer to 64
> [    4.010536] e100 0000:08:08.0: PME# disabled
> [    4.018080] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b800a2)
> [    4.021501] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
> [    4.021510] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
> [    4.021513] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
> [    4.025697] e100: eth0: e100_probe: addr 0xd2006000, irq 20, MAC addr 00:16:d4:36:d7:6e
> [    4.128994] [drm] nouveau 0000:01:00.0: ... appears to be valid
> [    4.129001] [drm] nouveau 0000:01:00.0: BIT BIOS found
> [    4.129008] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.26
> [    4.129011] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
> [    4.129014] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
> [    4.129017] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
> [    4.129021] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03005323 00000004
> [    4.129025] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00000028
> [    4.129028] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02c223f1 0040c070
> [    4.129032] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
> [    4.129035] [drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
> [    4.129039] [drm] nouveau 0000:01:00.0:   1: 0x00000130: type 0x30 idx 1 tag 0xff
> [    4.129042] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
> [    4.129045] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
> [    4.129048] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
> [    4.129051] [drm] nouveau 0000:01:00.0:   5: 0x00000340: type 0x40 idx 5 tag 0xff
> [    4.129054] [drm] nouveau 0000:01:00.0:   6: 0x00000431: type 0x31 idx 6 tag 0xff
> [    4.129064] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDBD6
> [    4.129136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE262
> [    4.177102] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE94C
> [    4.177123] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAC7
> [    4.201088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xECB5
> [    4.201096] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
> [    4.232033] [TTM] Zone  kernel: Available graphics memory: 443604 kiB.
> [    4.232036] [TTM] Zone highmem: Available graphics memory: 512472 kiB.
> [    4.234150] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
> [    4.234894] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
> [    4.237796] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
> [    4.237805] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
> [    4.237811] [drm] nouveau 0000:01:00.0: Saving VGA fonts
> [    4.301591] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
> [    4.405616] [drm] nouveau 0000:01:00.0: Detected a VGA connector
> [    4.405713] [drm] nouveau 0000:01:00.0: Detected a TV connector
> [    4.407105] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
> [    4.407109] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
> [    4.407113] [drm] nouveau 0000:01:00.0: 0xCDA1: Parsing digital output script table
> [    4.453076] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
> [    4.453081] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
> [    4.534095] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x49000, bo efadbe00
> [    4.534255] fb0: nouveaufb frame buffer device
> [    4.534258] registered panic notifier
> [    4.534265] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
> [    4.551751] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
> [    4.551755] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
> [    4.551759] [drm] nouveau 0000:01:00.0: 0xCE17: Parsing digital output script table
> [    4.720080] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
> [    4.720084] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
> [    4.720087] [drm] nouveau 0000:01:00.0: 0xCD92: Parsing digital output script table
> [    4.720095] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
> [    4.721181] Console: switching to colour frame buffer device 180x56
> [    5.111431] REISERFS (device sdb1): found reiserfs format "3.6" with standard journal
> [    5.111449] REISERFS (device sdb1): using ordered data mode
> [    5.132043] REISERFS (device sdb1): journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> [    5.132336] REISERFS (device sdb1): checking transaction log (sdb1)
> [   15.651069] REISERFS (device sdb1): replayed 114 transactions in 10 seconds
> [   15.702950] REISERFS (device sdb1): Using r5 hash to sort names
> [   41.397586] REISERFS (device sdb1): Removing [7568357 13853838 0x0 SD]..done
> [   41.397678] REISERFS (device sdb1): Removing [7568357 13853837 0x0 SD]..done
> [   41.397733] REISERFS (device sdb1): Removing [7568357 13853832 0x0 SD]..done
> [   41.397797] REISERFS (device sdb1): Removing [7568357 13853831 0x0 SD]..done
> [   41.397882] REISERFS (device sdb1): Removing [7896571 7015165 0x0 SD]..done
> [   41.397912] REISERFS (device sdb1): Removing [7896571 7007246 0x0 SD]..done
> [   41.397940] REISERFS (device sdb1): Removing [7896571 7005132 0x0 SD]..done
> [   41.397973] REISERFS (device sdb1): Removing [7896571 6474739 0x0 SD]..done
> [   41.398003] REISERFS (device sdb1): Removing [7896571 2819835 0x0 SD]..done
> [   41.398027] REISERFS (device sdb1): There were 9 uncompleted unlinks/truncates. Completed
> [   41.450870] udev: starting version 151
> [   45.308602] input: HP WMI hotkeys as /devices/virtual/input/input6
> [   45.487193] Bluetooth: Core ver 2.15
> [   45.487486] NET: Registered protocol family 31
> [   45.487489] Bluetooth: HCI device and connection manager initialized
> [   45.487493] Bluetooth: HCI socket layer initialized
> [   45.995175] cfg80211: Calling CRDA to update world regulatory domain
> [   46.237669] Bluetooth: Generic Bluetooth USB driver ver 0.6
> [   46.237863] usbcore: registered new interface driver btusb
> [   46.240854] yenta_cardbus 0000:08:06.0: CardBus bridge found [103c:30a5]
> [   46.240878] yenta_cardbus 0000:08:06.0: Enabling burst memory read transactions
> [   46.240885] yenta_cardbus 0000:08:06.0: Using INTVAL to route CSC interrupts to PCI
> [   46.240888] yenta_cardbus 0000:08:06.0: Routing CardBus interrupts to ISA
> [   46.240895] yenta_cardbus 0000:08:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
> [   46.469842] yenta_cardbus 0000:08:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
> [   46.469848] yenta_cardbus 0000:08:06.0: Socket status: 30000006
> [   46.469852] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
> [   46.469864] yenta_cardbus 0000:08:06.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
> [   46.469868] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x303f 0x3400-0x34ff 0x3800-0x38ff
> [   46.476610] yenta_cardbus 0000:08:06.0: pcmcia: parent PCI bridge window: [mem 0xd2000000-0xd20fffff]
> [   46.476613] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2000000-0xd20fffff: excluding 0xd2000000-0xd200ffff
> [   46.476632] yenta_cardbus 0000:08:06.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
> [   46.476636] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
> [   46.491184] intel_rng: FWH not detected
> [   46.627915] sdhci: Secure Digital Host Controller Interface driver
> [   46.627919] sdhci: Copyright(c) Pierre Ossman
> [   46.697251] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
> [   46.718521] sdhci-pci 0000:08:06.3: SDHCI controller found [104c:803c] (rev 0)
> [   46.718544] sdhci-pci 0000:08:06.3: PCI INT D ->  GSI 20 (level, low) ->  IRQ 20
> [   46.718879] Registered led device: mmc0::
> [   46.718979] mmc0: SDHCI controller on PCI [0000:08:06.3] using PIO
> [   46.751351]   alloc irq_desc for 22 on node -1
> [   46.751354]   alloc kstat_irqs on node -1
> [   46.751362] tifm_7xx1 0000:08:06.2: PCI INT C ->  GSI 22 (level, low) ->  IRQ 22
> [   46.774000] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
> [   47.206104] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
> [   47.206109] iwl3945: Copyright(c) 2003-2010 Intel Corporation
> [   47.206426] iwl3945 0000:06:00.0: PCI INT A ->  GSI 18 (level, low) ->  IRQ 18
> [   47.206442] iwl3945 0000:06:00.0: setting latency timer to 64
> [   47.246812] iwl3945 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
> [   47.246817] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
> [   47.246937]   alloc irq_desc for 29 on node -1
> [   47.246939]   alloc kstat_irqs on node -1
> [   47.246974] iwl3945 0000:06:00.0: irq 29 for MSI/MSI-X
> [   47.543899] cfg80211: World regulatory domain updated:
> [   47.543903]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [   47.543907]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [   47.543911]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [   47.543914]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [   47.543917]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [   47.543920]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [   47.776203] phy0: Selected rate control algorithm 'iwl-3945-rs'
> [   47.789334] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
> [   47.791376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
> [   47.792243] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
> [   47.792972] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
> [   47.793822] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
> [   47.793891] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
> [   47.793961] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
> [   47.794033] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
> [   47.797654] udev: renamed network interface wlan0 to wl_i3954
> [   49.290735] HDA Intel 0000:00:1b.0: PCI INT A ->  GSI 22 (level, low) ->  IRQ 22
> [   49.290800]   alloc irq_desc for 30 on node -1
> [   49.290802]   alloc kstat_irqs on node -1
> [   49.290817] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
> [   49.290855] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   53.388476] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
> [   53.570890] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
> [   53.657621] ADDRCONF(NETDEV_UP): wl_i3954: link is not ready
> [   53.726967] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   54.509039] microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x0
> [   54.509046] platform microcode: firmware: requesting intel-ucode/06-0f-02
> [   54.511096] microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x0
> [   54.511101] platform microcode: firmware: requesting intel-ucode/06-0f-02
> [   54.513797] microcode: Microcode Update Driver: v2.00<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> [   54.920159] microcode: CPU0 updated to revision 0x57, date = 2007-03-15
> [   54.921936] microcode: CPU1 updated to revision 0x57, date = 2007-03-15
> [   56.310034] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on lvds encoder (output 0)
> [   56.310038] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
> [   56.310044] [drm] nouveau 0000:01:00.0: 0xCDA1: Parsing digital output script table
>    


--
Dave Lynch 					  	    DLA Systems
Software Development:  				         Embedded Linux
717.587.7774 	       dhlii@xxxxxxxxxx 	  http://www.dlasys.net
Over 25 years' experience in platforms, languages, and technologies too numerous to list.

"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html