On Fri, Apr 09, 2010 at 07:46:04PM -0700, Yinghai wrote:
> please use this one replace second patch
> [PATCH] x86,pci, acpi: Inherent BUSY flag when setup_resource for root bus
>
> So make pci root resource from _CRS honor the range We reserve in e820 below 1M
>
> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
>
> ---
> arch/x86/pci/acpi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> Index: linux-2.6/arch/x86/pci/acpi.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/pci/acpi.c
> +++ linux-2.6/arch/x86/pci/acpi.c
> @@ -175,6 +175,10 @@ setup_resource(struct acpi_resource *acp
> "conflicts with %s %pR\n",
> res, conflict->name, conflict);
> } else {
> + /* In case it falls in big reserved region */
> + if (res->parent->flags & IORESOURCE_BUSY)
> + res->flags |= IORESOURCE_BUSY;
> +
> pci_bus_add_resource(info->bus, res, 0);
That doesn't work:
[ 0.000000] Linux version 2.6.34-rc3-00412-gef61642 (andy@farthing) (gcc version 4.3.3 (Debian 4.3.3-5) ) #13 SMP Mon Apr 12 11:12:43 PDT 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.34-rc3-00412-gef61642 root=UUID=a2359eda-9295-451c-924f-c181c6f49d0d ro console=tty0 console=ttyS0,115200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe01c00 (usable)
[ 0.000000] BIOS-e820: 00000000bfe01c00 - 00000000bfe53c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe55c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bc000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbfe01 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe01000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001bc000000
[ 0.000000] RAMDISK: 37c8e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fcea4 0006C (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fcfcc 000F4 (v03 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000fff5aafd 03794 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bfe01c00 00040
[ 0.000000] ACPI: SSDT 00000000fff5e291 00099 (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fd0c0 00092 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fd152 00028 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 00000000000fd17a 00096 (v32 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fd210 0003E (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fd24e 00038 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000000fd4aa 00032 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fd286 00176 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bc000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001bc000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001bc000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bfe01
[ 0.000000] 0: 0x00100000 -> 0x001bc000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfe01000 - 00000000bfe02000
[ 0.000000] PM: Registered nosave memory: 00000000bfe02000 - 00000000bfe53000
[ 0.000000] PM: Registered nosave memory: 00000000bfe53000 - 00000000bfe54000
[ 0.000000] PM: Registered nosave memory: 00000000bfe54000 - 00000000bfe55000
[ 0.000000] PM: Registered nosave memory: 00000000bfe55000 - 00000000bfe56000
[ 0.000000] PM: Registered nosave memory: 00000000bfe56000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001e00000 s81896 r8192 d20504 u262144
[ 0.000000] pcpu-alloc: s81896 r8192 d20504 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1531006
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.34-rc3-00412-gef61642 root=UUID=a2359eda-9295-451c-924f-c181c6f49d0d ro console=tty0 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (62 early reservations)
[ 0.000000] #1 [0001000000 - 0001db1168] TEXT DATA BSS
[ 0.000000] #2 [0037c8e000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001db2000 - 0001db21a8] BRK
[ 0.000000] #4 [00000fe720 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000fe710 - 00000fe720] MP-table mpf
[ 0.000000] #6 [000009ec00 - 00000f0000] BIOS reserved
[ 0.000000] #7 [00000f0304 - 00000fe710] BIOS reserved
[ 0.000000] #8 [00000f0000 - 00000f0304] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #11 [0000008000 - 000000b000] PGTABLE
[ 0.000000] #12 [000000b000 - 000000e000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [0001db21c0 - 0001db31c0] BOOTMEM
[ 0.000000] #15 [0001db1180 - 0001db1600] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0105600000] MEMMAP 0
[ 0.000000] #19 [0001db1600 - 0001db1780] BOOTMEM
[ 0.000000] #20 [0001db31c0 - 0001dcb1c0] BOOTMEM
[ 0.000000] #21 [0001dcb1c0 - 0001de31c0] BOOTMEM
[ 0.000000] #22 [0001de4000 - 0001de5000] BOOTMEM
[ 0.000000] #23 [0001db1780 - 0001db17c1] BOOTMEM
[ 0.000000] #24 [0001db1800 - 0001db1843] BOOTMEM
[ 0.000000] #25 [0001db1880 - 0001db1b58] BOOTMEM
[ 0.000000] #26 [0001db1b80 - 0001db1be8] BOOTMEM
[ 0.000000] #27 [0001db1c00 - 0001db1c68] BOOTMEM
[ 0.000000] #28 [0001db1c80 - 0001db1ce8] BOOTMEM
[ 0.000000] #29 [0001db1d00 - 0001db1d68] BOOTMEM
[ 0.000000] #30 [0001db1d80 - 0001db1de8] BOOTMEM
[ 0.000000] #31 [0001db1e00 - 0001db1e68] BOOTMEM
[ 0.000000] #32 [0001db1e80 - 0001db1ee8] BOOTMEM
[ 0.000000] #33 [0001db1f00 - 0001db1f68] BOOTMEM
[ 0.000000] #34 [0001db1f80 - 0001db1fe8] BOOTMEM
[ 0.000000] #35 [0001de31c0 - 0001de3228] BOOTMEM
[ 0.000000] #36 [0001de3240 - 0001de32a8] BOOTMEM
[ 0.000000] #37 [0001de32c0 - 0001de3328] BOOTMEM
[ 0.000000] #38 [0001de3340 - 0001de3360] BOOTMEM
[ 0.000000] #39 [0001de3380 - 0001de33a0] BOOTMEM
[ 0.000000] #40 [0001de33c0 - 0001de3442] BOOTMEM
[ 0.000000] #41 [0001de3480 - 0001de3502] BOOTMEM
[ 0.000000] #42 [0001e00000 - 0001e1b000] BOOTMEM
[ 0.000000] #43 [0001e40000 - 0001e5b000] BOOTMEM
[ 0.000000] #44 [0001e80000 - 0001e9b000] BOOTMEM
[ 0.000000] #45 [0001ec0000 - 0001edb000] BOOTMEM
[ 0.000000] #46 [0001f00000 - 0001f1b000] BOOTMEM
[ 0.000000] #47 [0001f40000 - 0001f5b000] BOOTMEM
[ 0.000000] #48 [0001f80000 - 0001f9b000] BOOTMEM
[ 0.000000] #49 [0001fc0000 - 0001fdb000] BOOTMEM
[ 0.000000] #50 [0001de3540 - 0001de3548] BOOTMEM
[ 0.000000] #51 [0001de3580 - 0001de3588] BOOTMEM
[ 0.000000] #52 [0001de35c0 - 0001de35e0] BOOTMEM
[ 0.000000] #53 [0001de3600 - 0001de3640] BOOTMEM
[ 0.000000] #54 [0001de3640 - 0001de3760] BOOTMEM
[ 0.000000] #55 [0001de3780 - 0001de37c8] BOOTMEM
[ 0.000000] #56 [0001de3800 - 0001de3848] BOOTMEM
[ 0.000000] #57 [0001de5000 - 0001ded000] BOOTMEM
[ 0.000000] #58 [0001fdb000 - 0005fdb000] BOOTMEM
[ 0.000000] #59 [0001e1b000 - 0001e3b000] BOOTMEM
[ 0.000000] #60 [0005fdb000 - 000601b000] BOOTMEM
[ 0.000000] #61 [000000f000 - 0000017000] BOOTMEM
[ 0.000000] Memory: 6052848k/7274496k available (5380k kernel code, 1051016k absent, 170632k reserved, 6497k data, 612k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.926 MHz processor.
[ 0.002006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.85 BogoMIPS (lpj=2393926)
[ 0.004021] Security Framework initialized
[ 0.005004] SELinux: Initializing.
[ 0.007340] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013595] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017347] Mount-cache hash table entries: 256
[ 0.018186] Initializing cgroup subsys ns
[ 0.019007] Initializing cgroup subsys cpuacct
[ 0.020005] Initializing cgroup subsys blkio
[ 0.021032] CPU: Physical Processor ID: 0
[ 0.022002] CPU: Processor Core ID: 0
[ 0.023003] using mwait in idle threads.
[ 0.024002] Performance Events: Core2 events, Intel PMU driver.
[ 0.027003] ... version: 2
[ 0.028002] ... bit width: 40
[ 0.029002] ... generic registers: 2
[ 0.030002] ... value mask: 000000ffffffffff
[ 0.031002] ... max period: 000000007fffffff
[ 0.032002] ... fixed-purpose events: 3
[ 0.033002] ... event mask: 0000000700000003
[ 0.034039] ACPI: Core revision 20100121
[ 0.201613] Setting APIC routing to flat
[ 0.203194] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.214375] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.217999] Booting Node 0, Processors #1 #2 #3
[ 0.434006] Brought up 4 CPUs
[ 0.435002] Total of 4 processors activated (19151.15 BogoMIPS).
[ 0.437105] khelper used greatest stack depth: 6008 bytes left
[ 0.444410] Time: 18:31:15 Date: 04/12/10
[ 0.445034] NET: Registered protocol family 16
[ 0.446035] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.447007] ACPI: bus type pci registered
[ 0.448043] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.449002] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.471880] PCI: Using configuration type 1 for base access
[ 0.484044] bio: create slab <bio-0> at 0
[ 0.517496] ACPI: BIOS _OSI(Linux) query ignored
[ 0.564286] ACPI: Interpreter enabled
[ 0.568002] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.572787] ACPI: Using IOAPIC for interrupt routing
[ 0.768235] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 87 (20100121/tbutils-314)
[ 0.778105] ACPI: No dock devices found.
[ 0.782003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.802383] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.828187] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.834002] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.841002] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.849001] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
[ 0.856002] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.864002] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.871002] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]
[ 0.878002] pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
[ 0.886001] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
[ 0.893001] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
[ 0.901888] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.910003] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.917003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.925003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 0.933265] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.938034] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.944052] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.949184] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.954146] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 2.992616] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 3.000443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 3.009073] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 3.017695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 3.027703] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 3.036307] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 3.045337] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 3.053793] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 3.062035] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.071003] vgaarb: loaded
[ 3.074034] SCSI subsystem initialized
[ 3.078023] usbcore: registered new interface driver usbfs
[ 3.084007] usbcore: registered new interface driver hub
[ 3.089020] usbcore: registered new device driver usb
[ 3.094025] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 3.101002] PCI: Using ACPI for IRQ routing
[ 3.105037] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
[ 3.114047] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 3.121071] cfg80211: Calling CRDA to update world regulatory domain
[ 3.127017] NetLabel: Initializing
[ 3.131001] NetLabel: domain hash size = 128
[ 3.135001] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.140011] NetLabel: unlabeled traffic allowed by default
[ 3.146004] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 3.153004] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 3.158393] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 3.168022] Switching to clocksource tsc
[ 3.181767] pnp: PnP ACPI init
[ 3.185027] ACPI: bus type pnp registered
[ 3.206083] pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f]
[ 3.216482] pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f]
[ 3.291583] pnp: PnP ACPI: found 12 devices
[ 3.295946] ACPI: ACPI bus type pnp unregistered
[ 3.300748] system 00:01: [io 0x0c00-0x0c7f] has been reserved
[ 3.312250] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 3.320319] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 3.328379] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 3.334645] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff]
[ 3.340912] pci 0000:00:1f.2: BAR 5: assigned [mem 0x000a0000-0x000a07ff]
[ 3.347874] pci 0000:00:1f.2: BAR 5: set to [mem 0x000a0000-0x000a07ff] (PCI address [0xa0000-0xa07ff]
[ 3.357490] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 3.362891] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 3.369169] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
[ 3.376141] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 3.384208] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 3.389608] pci 0000:00:06.0: bridge window [io disabled]
[ 3.395442] pci 0000:00:06.0: bridge window [mem disabled]
[ 3.401276] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 3.407543] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 3.412946] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 3.419218] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 3.426188] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 3.434257] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 3.439658] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 3.445926] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff]
[ 3.452888] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 3.460946] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 3.466346] pci 0000:00:1e.0: bridge window [io disabled]
[ 3.472191] pci 0000:00:1e.0: bridge window [mem 0xf9d00000-0xf9dfffff]
[ 3.479162] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 3.485440] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492320] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.499212] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.506106] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.513081] NET: Registered protocol family 2
[ 3.517821] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 3.526825] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 3.539418] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.546927] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.553715] TCP reno registered
[ 3.557051] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.563418] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.570345] NET: Registered protocol family 1
[ 3.575101] RPC: Registered udp transport module.
[ 3.579983] RPC: Registered tcp transport module.
[ 3.584866] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.703019] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 4.710417] Trying to unpack rootfs image as initramfs...
[ 4.780651] Freeing initrd memory: 3464k freed
[ 4.786286] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.792900] Placing 64MB software IO TLB between ffff880001fdb000 - ffff880005fdb000
[ 4.800942] software IO TLB at phys 0x1fdb000 - 0x5fdb000
[ 4.806768] Simple Boot Flag at 0x7a set to 0x1
[ 4.813742] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
[ 4.819672] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3
[ 4.825597] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3
[ 4.831521] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3
[ 4.841109] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 4.850612] audit: initializing netlink socket (disabled)
[ 4.856205] type=2000 audit(1271097077.856:1): initialized
[ 4.881674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.892424] VFS: Disk quotas dquot_6.5.2
[ 4.896631] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.904525] msgmni has been set to 11828
[ 4.909414] alg: No test for stdrng (krng)
[ 4.913847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.921553] io scheduler noop registered
[ 4.925646] io scheduler deadline registered
[ 4.930258] io scheduler cfq registered (default)
[ 4.936330] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
[ 4.944036] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
[ 4.953225] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
[ 4.960093] pcieport 0000:00:06.0: Requesting control of PCIe PME from ACPI BIOS
[ 4.967790] pcieport 0000:00:06.0: Failed to receive control of PCIe PME service: no _OSC support
[ 4.976959] pcie_pme: probe of 0000:00:06.0:pcie01 failed with error -13
[ 4.983828] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 4.991536] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[ 5.000704] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[ 5.007572] pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
[ 5.015289] pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
[ 5.024476] pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
[ 5.031480] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.037685] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.046360] ACPI: Power Button [VBTN]
[ 5.050324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.058026] ACPI: Power Button [PWRF]
[ 5.162277] Non-volatile memory driver v1.3
[ 5.166644] Linux agpgart interface v0.103
[ 5.171228] [drm] Initialized drm 1.1.0 20060810
[ 5.176016] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 5.183799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿ[ 5.434353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.441169] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.449894] brd: module loaded
[ 5.454495] loop: module loaded
[ 5.457942] Loading iSCSI transport class v2.0-870.
[ 5.463672] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 5.470633] ahci 0000:00:1f.2: BAR 5: can't reserve [mem 0x000a0000-0x000a07ff]
[ 5.478257] ahci: probe of 0000:00:1f.2 failed with error -16
-andy
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
