On Sun, 2010-03-28 at 12:13 +0300, Felix Radensky wrote: > I've tried Jesse's tree with Yinghai's patches, but they don't seem to help. > Memory for bridge is not allocated after insertion of hotplug device and > bus rescan. Attached dmesg output in case of success and failure. I'd recommend that for now, your platform uses a quirk to manually resize the bridge resource to make room for future hotplug on it. Cheers, Ben. > Thanks. > > Felix. > plain text document attachment (success.txt) > Linux version 2.6.33 (felix@xxxxxxxxxxxxxxxx) (gcc version 4.2.2) #8 Sun Mar 28 12:04:25 IDT 2010 > Found legacy serial port 0 for /plb/opb/serial@ef600300 > mem=4ef600300, taddr=4ef600300, irq=0, clk=7407407, speed=0 > Found legacy serial port 1 for /plb/opb/serial@ef600400 > mem=4ef600400, taddr=4ef600400, irq=0, clk=7407407, speed=0 > Found legacy serial port 2 for /plb/opb/serial@ef600500 > mem=4ef600500, taddr=4ef600500, irq=0, clk=7407407, speed=0 > Found legacy serial port 3 for /plb/opb/serial@ef600600 > mem=4ef600600, taddr=4ef600600, irq=0, clk=7407407, speed=0 > Top of RAM: 0x30000000, Total RAM: 0x30000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0x00000000 -> 0x00030000 > Normal 0x00030000 -> 0x00030000 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0x00000000 -> 0x00030000 > On node 0 totalpages: 196608 > free_area_init_node: node 0, pgdat c02a84d0, node_mem_map c02e1000 > DMA zone: 1536 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 195072 pages, LIFO batch:31 > MMU: Allocated 1088 bytes of context maps for 255 contexts > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072 > Kernel command line: root=/dev/nfs rw nfsroot=10.0.0.10:/opt/eldk/ppc_4xxFP ip=10.0.0.30:10.0.0.10:10.0.0.138:255.0.0.0:smbe460:eth0:off panic=1 console=ttyS0,115200 > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 776500k/786432k available (2656k kernel code, 9932k reserved, 100k data, 184k bss, 132k init) > Kernel virtual memory layout: > * 0xfffdf000..0xfffff000 : fixmap > * 0xfde00000..0xfe000000 : consistent mem > * 0xfde00000..0xfde00000 : early ioremap > * 0xf1000000..0xfde00000 : vmalloc & ioremap > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > Hierarchical RCU implementation. > NR_IRQS:512 nr_irqs:512 > UIC0 (32 IRQ sources) at DCR 0xc0 > UIC1 (32 IRQ sources) at DCR 0xd0 > alloc irq_desc for 30 on node 0 > alloc kstat_irqs on node 0 > irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30 > UIC2 (32 IRQ sources) at DCR 0xe0 > alloc irq_desc for 16 on node 0 > alloc kstat_irqs on node 0 > irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16 > UIC3 (32 IRQ sources) at DCR 0xf0 > alloc irq_desc for 17 on node 0 > alloc kstat_irqs on node 0 > irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17 > time_init: decrementer frequency = 1000.000012 MHz > time_init: processor frequency = 1000.000012 MHz > clocksource: timebase mult[400000] shift[22] registered > clockevent: decrementer mult[80000019] shift[31] cpu[0] > Mount-cache hash table entries: 512 > NET: Registered protocol family 16 > alloc irq_desc for 18 on node 0 > alloc kstat_irqs on node 0 > irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18 > 256k L2-cache enabled > PCI host bridge /plb/pci@c0ec00000 (primary) ranges: > MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 > MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 > IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000c0ee00000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pci@c0ec00000: Legacy ISA memory support enabled > PCI: Probing PCI hardware > pci_bus 0000:00: scanning bus > pci 0000:00:02.0: found [3388:0020] class 000604 header type 01 > pci 0000:00:02.0: calling pcibios_fixup_resources+0x0/0xf4 > pci 0000:00:02.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154 > pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x200 > pci 0000:00:02.0: supports D1 D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot > pci 0000:00:02.0: PME# disabled > pci_bus 0000:00: fixups for bus > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0 > pci_bus 0000:01: scanning bus > pci 0000:01:00.0: found [1575:0002] class 00ff00 header type 00 > pci 0000:01:00.0: reg 10: [mem 0x80000000-0x800fffff] > pci 0000:01:00.0: reg 14: [mem 0x84000000-0x87ffffff] > pci 0000:01:00.0: reg 18: [mem 0x88000000-0x8bffffff] > pci 0000:01:00.0: reg 1c: [mem 0x8c000000-0x8c003fff] > pci 0000:01:00.0: calling pcibios_fixup_resources+0x0/0xf4 > pci 0000:01:00.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154 > pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x200 > pci_bus 0000:01: fixups for bus > pci 0000:00:02.0: PCI bridge to [bus 01-01] > pci 0000:00:02.0: bridge window [io 1000 - 0000] reg reading > pci 0000:00:02.0: bridge window [mem 0x80000000-0x8c0fffff] > pci 0000:00:02.0: bridge window [mem 0x10000000 - 000fffff pref] reg reading > pci_bus 0000:01: bus scan returning with max=01 > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1 > pci_bus 0000:00: bus scan returning with max=01 > PCI: max bus depth: 1 pci_try_num: 2 > pci 0000:00:02.0: BAR 8: assigned [mem 0xd80000000-0xd8dffffff] > pci 0000:01:00.0: BAR 1: assigned [mem 0xd80000000-0xd83ffffff] > pci 0000:01:00.0: BAR 1: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff] > pci 0000:01:00.0: BAR 2: assigned [mem 0xd84000000-0xd87ffffff] > pci 0000:01:00.0: BAR 2: set to [mem 0xd84000000-0xd87ffffff] (PCI address [0x84000000-0x87ffffff] > pci 0000:01:00.0: BAR 0: assigned [mem 0xd88000000-0xd880fffff] > pci 0000:01:00.0: BAR 0: set to [mem 0xd88000000-0xd880fffff] (PCI address [0x88000000-0x880fffff] > pci 0000:01:00.0: BAR 3: assigned [mem 0xd88100000-0xd88103fff] > pci 0000:01:00.0: BAR 3: set to [mem 0xd88100000-0xd88103fff] (PCI address [0x88100000-0x88103fff] > pci 0000:00:02.0: PCI bridge to [bus 01-01] > pci 0000:00:02.0: bridge window [io disabled] > pci 0000:00:02.0: bridge window [mem 0xd80000000-0xd8dffffff] > pci 0000:00:02.0: bridge window [mem pref disabled] > pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > pci_bus 0000:00: resource 1 [mem 0xd80000000-0xdffffffff] > pci_bus 0000:01: resource 1 [mem 0xd80000000-0xd8dffffff] > bio: create slab <bio-0> at 0 > SCSI subsystem initialized > Switching to clocksource timebase > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > UDP hash table entries: 512 (order: 1, 8192 bytes) > UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x54 > pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x6d0 > pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x54 > pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x6d0 > PCI: CLS 32 bytes, default 32 > alloc irq_desc for 19 on node 0 > alloc kstat_irqs on node 0 > irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 19 > alloc irq_desc for 20 on node 0 > alloc kstat_irqs on node 0 > irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 20 > alloc irq_desc for 29 on node 0 > alloc kstat_irqs on node 0 > irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 29 > alloc irq_desc for 21 on node 0 > alloc kstat_irqs on node 0 > irq: irq 30 on host /interrupt-controller1 mapped to virtual irq 21 > msgmni has been set to 1516 > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550A > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550A > serial8250.0: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550A > serial8250.0: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550A > 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550 > 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550 > 4ef600500.serial: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550 > 4ef600600.serial: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550 > PPC 4xx OCP EMAC driver, version 3.54 > alloc irq_desc for 22 on node 0 > alloc kstat_irqs on node 0 > irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22 > alloc irq_desc for 23 on node 0 > alloc kstat_irqs on node 0 > irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23 > alloc irq_desc for 24 on node 0 > alloc kstat_irqs on node 0 > irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24 > alloc irq_desc for 25 on node 0 > alloc kstat_irqs on node 0 > irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25 > alloc irq_desc for 26 on node 0 > alloc kstat_irqs on node 0 > irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26 > MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels > ZMII /plb/opb/emac-zmii@ef600d00 initialized > RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support > TAH /plb/opb/emac-tah@ef601350 initialized > TAH /plb/opb/emac-tah@ef601450 initialized > alloc irq_desc for 27 on node 0 > alloc kstat_irqs on node 0 > irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 27 > alloc irq_desc for 28 on node 0 > alloc kstat_irqs on node 0 > irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 28 > /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode > eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:99:88:77:66:55 > eth0: found Generic MII PHY (0x00) > alloc irq_desc for 31 on node 0 > alloc kstat_irqs on node 0 > irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 31 > alloc irq_desc for 32 on node 0 > alloc kstat_irqs on node 0 > irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 32 > /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode > eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:99:88:77:66:56 > eth1: found Generic MII PHY (0x10) > TCP cubic registered > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> > All bugs added by David S. Miller <davem@xxxxxxxxxx> > eth0: link is down > IP-Config: Complete: > device=eth0, addr=10.0.0.30, mask=255.0.0.0, gw=10.0.0.138, > host=smbe460, domain=, nis-domain=(none), > bootserver=10.0.0.10, rootserver=10.0.0.10, rootpath= > Looking up port of RPC 100003/2 on 10.0.0.10 > eth0: link is up, 100 FDX, pause enabled > Looking up port of RPC 100005/1 on 10.0.0.10 > VFS: Mounted root (nfs filesystem) on device 0:11. > Freeing unused kernel memory: 132k init > plain text document attachment (failure.txt) > Linux version 2.6.33 (felix@xxxxxxxxxxxxxxxx) (gcc version 4.2.2) #8 Sun Mar 28 12:04:25 IDT 2010 > Found legacy serial port 0 for /plb/opb/serial@ef600300 > mem=4ef600300, taddr=4ef600300, irq=0, clk=7407407, speed=0 > Found legacy serial port 1 for /plb/opb/serial@ef600400 > mem=4ef600400, taddr=4ef600400, irq=0, clk=7407407, speed=0 > Found legacy serial port 2 for /plb/opb/serial@ef600500 > mem=4ef600500, taddr=4ef600500, irq=0, clk=7407407, speed=0 > Found legacy serial port 3 for /plb/opb/serial@ef600600 > mem=4ef600600, taddr=4ef600600, irq=0, clk=7407407, speed=0 > Top of RAM: 0x30000000, Total RAM: 0x30000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0x00000000 -> 0x00030000 > Normal 0x00030000 -> 0x00030000 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0x00000000 -> 0x00030000 > On node 0 totalpages: 196608 > free_area_init_node: node 0, pgdat c02a84d0, node_mem_map c02e1000 > DMA zone: 1536 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 195072 pages, LIFO batch:31 > MMU: Allocated 1088 bytes of context maps for 255 contexts > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072 > Kernel command line: root=/dev/nfs rw nfsroot=10.0.0.10:/opt/eldk/ppc_4xxFP ip=10.0.0.30:10.0.0.10:10.0.0.138:255.0.0.0:smbe460:eth0:off panic=1 console=ttyS0,115200 > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 776500k/786432k available (2656k kernel code, 9932k reserved, 100k data, 184k bss, 132k init) > Kernel virtual memory layout: > * 0xfffdf000..0xfffff000 : fixmap > * 0xfde00000..0xfe000000 : consistent mem > * 0xfde00000..0xfde00000 : early ioremap > * 0xf1000000..0xfde00000 : vmalloc & ioremap > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > Hierarchical RCU implementation. > NR_IRQS:512 nr_irqs:512 > UIC0 (32 IRQ sources) at DCR 0xc0 > UIC1 (32 IRQ sources) at DCR 0xd0 > alloc irq_desc for 30 on node 0 > alloc kstat_irqs on node 0 > irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30 > UIC2 (32 IRQ sources) at DCR 0xe0 > alloc irq_desc for 16 on node 0 > alloc kstat_irqs on node 0 > irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16 > UIC3 (32 IRQ sources) at DCR 0xf0 > alloc irq_desc for 17 on node 0 > alloc kstat_irqs on node 0 > irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17 > time_init: decrementer frequency = 1000.000012 MHz > time_init: processor frequency = 1000.000012 MHz > clocksource: timebase mult[400000] shift[22] registered > clockevent: decrementer mult[80000019] shift[31] cpu[0] > Mount-cache hash table entries: 512 > NET: Registered protocol family 16 > alloc irq_desc for 18 on node 0 > alloc kstat_irqs on node 0 > irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18 > 256k L2-cache enabled > PCI host bridge /plb/pci@c0ec00000 (primary) ranges: > MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 > MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 > IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000c0ee00000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pci@c0ec00000: Legacy ISA memory support enabled > PCI: Probing PCI hardware > pci_bus 0000:00: scanning bus > pci 0000:00:02.0: found [3388:0020] class 000604 header type 01 > pci 0000:00:02.0: calling pcibios_fixup_resources+0x0/0xf4 > pci 0000:00:02.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154 > pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x200 > pci 0000:00:02.0: supports D1 D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot > pci 0000:00:02.0: PME# disabled > pci_bus 0000:00: fixups for bus > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0 > pci_bus 0000:01: scanning bus > pci_bus 0000:01: fixups for bus > pci 0000:00:02.0: PCI bridge to [bus 01-01] > pci 0000:00:02.0: bridge window [io 1000 - 0000] reg reading > pci 0000:00:02.0: bridge window [mem 0x80000000 - 0x7fffffff] reg reading > pci 0000:00:02.0: bridge window [mem 0x10000000 - 000fffff pref] reg reading > pci_bus 0000:01: bus scan returning with max=01 > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1 > pci_bus 0000:00: bus scan returning with max=01 > PCI: max bus depth: 1 pci_try_num: 2 > pci 0000:00:02.0: PCI bridge to [bus 01-01] > pci 0000:00:02.0: bridge window [io disabled] > pci 0000:00:02.0: bridge window [mem disabled] > pci 0000:00:02.0: bridge window [mem pref disabled] > pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > pci_bus 0000:00: resource 1 [mem 0xd80000000-0xdffffffff] > bio: create slab <bio-0> at 0 > SCSI subsystem initialized > Switching to clocksource timebase > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > UDP hash table entries: 512 (order: 1, 8192 bytes) > UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x54 > pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x6d0 > PCI: CLS 32 bytes, default 32 > alloc irq_desc for 19 on node 0 > alloc kstat_irqs on node 0 > irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 19 > alloc irq_desc for 20 on node 0 > alloc kstat_irqs on node 0 > irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 20 > alloc irq_desc for 29 on node 0 > alloc kstat_irqs on node 0 > irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 29 > alloc irq_desc for 21 on node 0 > alloc kstat_irqs on node 0 > irq: irq 30 on host /interrupt-controller1 mapped to virtual irq 21 > msgmni has been set to 1516 > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550A > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550A > serial8250.0: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550A > serial8250.0: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550A > 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550 > 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550 > 4ef600500.serial: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550 > 4ef600600.serial: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550 > PPC 4xx OCP EMAC driver, version 3.54 > alloc irq_desc for 22 on node 0 > alloc kstat_irqs on node 0 > irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22 > alloc irq_desc for 23 on node 0 > alloc kstat_irqs on node 0 > irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23 > alloc irq_desc for 24 on node 0 > alloc kstat_irqs on node 0 > irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24 > alloc irq_desc for 25 on node 0 > alloc kstat_irqs on node 0 > irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25 > alloc irq_desc for 26 on node 0 > alloc kstat_irqs on node 0 > irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26 > MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels > ZMII /plb/opb/emac-zmii@ef600d00 initialized > RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support > TAH /plb/opb/emac-tah@ef601350 initialized > TAH /plb/opb/emac-tah@ef601450 initialized > alloc irq_desc for 27 on node 0 > alloc kstat_irqs on node 0 > irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 27 > alloc irq_desc for 28 on node 0 > alloc kstat_irqs on node 0 > irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 28 > /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode > eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:99:88:77:66:55 > eth0: found Generic MII PHY (0x00) > alloc irq_desc for 31 on node 0 > alloc kstat_irqs on node 0 > irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 31 > alloc irq_desc for 32 on node 0 > alloc kstat_irqs on node 0 > irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 32 > /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode > eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:99:88:77:66:56 > eth1: found Generic MII PHY (0x10) > TCP cubic registered > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> > All bugs added by David S. Miller <davem@xxxxxxxxxx> > eth0: link is down > IP-Config: Complete: > device=eth0, addr=10.0.0.30, mask=255.0.0.0, gw=10.0.0.138, > host=smbe460, domain=, nis-domain=(none), > bootserver=10.0.0.10, rootserver=10.0.0.10, rootpath= > Looking up port of RPC 100003/2 on 10.0.0.10 > eth0: link is up, 100 FDX, pause enabled > Looking up port of RPC 100005/1 on 10.0.0.10 > VFS: Mounted root (nfs filesystem) on device 0:11. > Freeing unused kernel memory: 132k init > pci_bus 0000:00: scanning bus > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0 > pci_bus 0000:01: scanning bus > pci 0000:01:00.0: found [1575:0002] class 00ff00 header type 00 > pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff] > pci 0000:01:00.0: reg 14: [mem 0x00000000-0x03ffffff] > pci 0000:01:00.0: reg 18: [mem 0x00000000-0x03ffffff] > pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x00003fff] > pci 0000:01:00.0: calling pcibios_fixup_resources+0x0/0xf4 > pci 0000:01:00.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154 > pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x200 > pci_bus 0000:01: bus scan returning with max=01 > pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1 > pci_bus 0000:00: bus scan returning with max=01 > pci 0000:00:02.0: BAR 8: assigned [mem 0xd80000000-0xd89ffffff] > pci 0000:01:00.0: BAR 1: assigned [mem 0xd80000000-0xd83ffffff] > pci 0000:01:00.0: BAR 1: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff] > pci 0000:01:00.0: BAR 2: assigned [mem 0xd84000000-0xd87ffffff] > pci 0000:01:00.0: BAR 2: set to [mem 0xd84000000-0xd87ffffff] (PCI address [0x84000000-0x87ffffff] > pci 0000:01:00.0: BAR 0: assigned [mem 0xd88000000-0xd880fffff] > pci 0000:01:00.0: BAR 0: set to [mem 0xd88000000-0xd880fffff] (PCI address [0x88000000-0x880fffff] > pci 0000:01:00.0: BAR 3: assigned [mem 0xd88100000-0xd88103fff] > pci 0000:01:00.0: BAR 3: set to [mem 0xd88100000-0xd88103fff] (PCI address [0x88100000-0x88103fff] > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@xxxxxxxxxxxxxxxx > https://lists.ozlabs.org/listinfo/linuxppc-dev -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
