Hey all, I have a Dell Inspiron E1505 for which I recently purchased a StarTech ExpressCard (supported by sata_sil24) eSATA adapter. Unfortunately, I found that the machine did not give the slightest acknowledgement of the card upon plugging it in. After doing some research, I tried the often suggested pciehp.pciehp_force=1 kernel parameter, as well as the acpiphp module. Even when the machine was booted with the card in place, lspci gave no acknowledgement of the card. I then tried the same card on my Dell Latitude D830 and found that the card was immediately functional. Thus, it seems likely that something is going badly wrong in the case of the Inspiron. Any ideas? I've included the appropriate machine details below, although I have probably missed something. I can reproduce the issue with both 2.6.31 and 2.6.32 kernels (both stock Ubuntu and vanilla personal builds). Any ideas would be greatly appreciated. Thanks! - Ben [1] dmesg after booting (2.6.32, pciehp.pciehp_force=1 pciehp.pciehp_debug=1) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.32-ben (ben@ben2) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #1 SMP Tue Mar 16 02:18:40 EDT 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005f6d3400 (usable) [ 0.000000] BIOS-e820: 000000005f6d3400 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x5f6d3 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05F800000 mask FFF800000 uncachable [ 0.000000] 3 base 05F700000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005f6d3400 (usable) [ 0.000000] modified: 000000005f6d3400 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] modified: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3580a000 - 37fef24a [ 0.000000] Allocated new RAMDISK: 017c5000 - 03faa24a [ 0.000000] Move RAMDISK from 000000003580a000 - 0000000037fef249 to 017c5000 - 03faa249 [ 0.000000] ACPI: RSDP 000fc1d0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 5f6d39cd 00040 (v01 DELL M07 27D7060D ASL 00000061) [ 0.000000] ACPI: FACP 5f6d4800 00074 (v01 DELL M07 27D7060D ASL 00000061) [ 0.000000] ACPI: DSDT 5f6d5400 04766 (v01 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 5f6e3c00 00040 [ 0.000000] ACPI: HPET 5f6d4f00 00038 (v01 DELL M07 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 5f6d5000 00068 (v01 DELL M07 27D7060D ASL 00000047) [ 0.000000] ACPI: MCFG 5f6d4fc0 0003E (v16 DELL M07 27D7060D ASL 00000061) [ 0.000000] ACPI: SLIC 5f6d509c 00176 (v01 DELL M07 27D7060D ASL 00000061) [ 0.000000] ACPI: BOOT 5f6d4bc0 00028 (v01 DELL M07 27D7060D ASL 00000061) [ 0.000000] ACPI: SSDT 5f6d3a0d 004DC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 638MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00017bc158] TEXT DATA BSS ==> [0001000000 - 00017bc158] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00017bd000 - 00017c4188] BRK ==> [00017bd000 - 00017c4188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00017c5000 - 0003faa24a] NEW RAMDISK ==> [00017c5000 - 0003faa24a] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005f6d3 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005f6d3 [ 0.000000] On node 0 totalpages: 390766 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1278 pages used for memmap [ 0.000000] HighMem zone: 162263 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:90000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c4c00000 s36120 r0 d21224 u2097152 [ 0.000000] pcpu-alloc: s36120 r0 d21224 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387712 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-ben root=UUID=e3dbe6c8-d592-4578-8f01-a0a9bfcf8cc1 ro quiet splash pciehp.pciehp_force=1 pciehp.pciehp_debug=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f6d3) [ 0.000000] Memory: 1500020k/1563468k available (4621k kernel code, 62072k reserved, 2189k data, 512k init, 654164k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc16a7000 - 0xc1727000 ( 512 kB) [ 0.000000] .data : 0xc1483445 - 0xc16a68c8 (2189 kB) [ 0.000000] .text : 0xc1000000 - 0xc1483445 (4621 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 7864320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.387 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.77 BogoMIPS (lpj=6385548) [ 0.004036] Security Framework initialized [ 0.004047] SELinux: Disabled at boot. [ 0.004058] Mount-cache hash table entries: 512 [ 0.004238] Initializing cgroup subsys ns [ 0.004243] Initializing cgroup subsys cpuacct [ 0.004249] Initializing cgroup subsys memory [ 0.004259] Initializing cgroup subsys freezer [ 0.004262] Initializing cgroup subsys net_cls [ 0.004286] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004289] CPU: L2 cache: 2048K [ 0.004295] CPU: Physical Processor ID: 0 [ 0.004297] CPU: Processor Core ID: 0 [ 0.004301] mce: CPU supports 6 MCE banks [ 0.004314] CPU0: Thermal monitoring enabled (TM2) [ 0.004319] using mwait in idle threads. [ 0.004328] Performance Events: no PMU driver, software events only. [ 0.004336] Checking 'hlt' instruction... OK. [ 0.022079] ACPI: Core revision 20090903 [ 0.031213] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.031220] ftrace: allocating 21902 entries in 43 pages [ 0.032451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.073008] CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Calibrating delay using timer specific routine.. 3192.86 BogoMIPS (lpj=6385736) [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.160119] CPU1: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 [ 0.160136] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.164001] Measured 3199023516 cycles TSC warp between CPUs, turning off TSC clock. [ 0.164001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.164023] Brought up 2 CPUs [ 0.164026] Total of 2 processors activated (6385.64 BogoMIPS). [ 0.164584] CPU0 attaching sched-domain: [ 0.164589] domain 0: span 0-1 level MC [ 0.164593] groups: 0 1 [ 0.164601] CPU1 attaching sched-domain: [ 0.164604] domain 0: span 0-1 level MC [ 0.164607] groups: 1 0 [ 0.164728] Time: 3:41:50 Date: 03/16/10 [ 0.164728] NET: Registered protocol family 16 [ 0.168057] ACPI: bus type pci registered [ 0.168074] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.168074] PCI: MCFG area at f0000000 reserved in E820 [ 0.168074] PCI: Using MMCONFIG for extended config space [ 0.168074] PCI: Using configuration type 1 for base access [ 0.172046] bio: create slab <bio-0> at 0 [ 0.172680] ACPI: EC: Look up EC in DSDT [ 0.191720] ACPI: Interpreter enabled [ 0.191731] ACPI: (supports S0 S3 S4 S5) [ 0.192624] ACPI: Using IOAPIC for interrupt routing [ 0.228287] ACPI: No dock devices found. [ 0.243910] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.244063] pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff] [ 0.244070] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] [ 0.244077] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.244083] pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff] [ 0.244132] pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff] [ 0.244259] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff] [ 0.244325] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.244331] pci 0000:00:1b.0: PME# disabled [ 0.244429] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.244435] pci 0000:00:1c.0: PME# disabled [ 0.244539] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.244545] pci 0000:00:1c.3: PME# disabled [ 0.244613] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.244682] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] [ 0.244751] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] [ 0.244821] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] [ 0.244894] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] [ 0.244962] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.244969] pci 0000:00:1d.7: PME# disabled [ 0.245153] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.245159] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.245165] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.245173] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.245246] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7] [ 0.245255] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7] [ 0.245264] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177] [ 0.245274] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377] [ 0.245283] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf] [ 0.245321] pci 0000:00:1f.2: PME# supported from D3hot [ 0.245327] pci 0000:00:1f.2: PME# disabled [ 0.245394] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.245566] pci 0000:0b:00.0: reg 10 64bit mmio: [0xefdf0000-0xefdfffff] [ 0.245817] pci 0000:00:1c.0: bridge 32bit mmio: [0xefd00000-0xefdfffff] [ 0.245889] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.245895] pci 0000:00:1c.3: bridge 32bit mmio: [0xefa00000-0xefcfffff] [ 0.245905] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff] [ 0.245952] pci 0000:03:00.0: reg 10 32bit mmio: [0xef9fe000-0xef9fffff] [ 0.246013] pci 0000:03:00.0: supports D1 D2 [ 0.246016] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246022] pci 0000:03:00.0: PME# disabled [ 0.246068] pci 0000:03:01.0: reg 10 32bit mmio: [0xef9fd800-0xef9fdfff] [ 0.246134] pci 0000:03:01.0: supports D1 D2 [ 0.246137] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246143] pci 0000:03:01.0: PME# disabled [ 0.246191] pci 0000:03:01.1: reg 10 32bit mmio: [0xef9fd500-0xef9fd5ff] [ 0.246256] pci 0000:03:01.1: supports D1 D2 [ 0.246259] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246265] pci 0000:03:01.1: PME# disabled [ 0.246312] pci 0000:03:01.2: reg 10 32bit mmio: [0xef9fd600-0xef9fd6ff] [ 0.246378] pci 0000:03:01.2: supports D1 D2 [ 0.246381] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246388] pci 0000:03:01.2: PME# disabled [ 0.246433] pci 0000:03:01.3: reg 10 32bit mmio: [0xef9fd700-0xef9fd7ff] [ 0.246499] pci 0000:03:01.3: supports D1 D2 [ 0.246502] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246509] pci 0000:03:01.3: PME# disabled [ 0.246585] pci 0000:00:1e.0: transparent bridge [ 0.246594] pci 0000:00:1e.0: bridge 32bit mmio: [0xef900000-0xef9fffff] [ 0.246624] pci_bus 0000:00: on NUMA node 0 [ 0.246630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.246986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.247095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.247197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.260121] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.260272] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 [ 0.260422] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.260570] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 0.260719] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.260873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.261025] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.261179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.261270] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.261270] vgaarb: loaded [ 0.261270] SCSI subsystem initialized [ 0.261270] libata version 3.00 loaded. [ 0.261270] usbcore: registered new interface driver usbfs [ 0.261270] usbcore: registered new interface driver hub [ 0.261270] usbcore: registered new device driver usb [ 0.261270] ACPI: WMI: Mapper loaded [ 0.261270] PCI: Using ACPI for IRQ routing [ 0.261270] Bluetooth: Core ver 2.15 [ 0.261270] NET: Registered protocol family 31 [ 0.261270] Bluetooth: HCI device and connection manager initialized [ 0.261270] Bluetooth: HCI socket layer initialized [ 0.261270] NetLabel: Initializing [ 0.261270] NetLabel: domain hash size = 128 [ 0.261270] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.261270] NetLabel: unlabeled traffic allowed by default [ 0.264067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.264067] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.268012] Switching to clocksource hpet [ 0.282882] pnp: PnP ACPI init [ 0.282907] ACPI: bus type pnp registered [ 0.319345] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.319351] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.319496] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.319501] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.319506] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.319511] pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.321235] pnp: PnP ACPI: found 12 devices [ 0.321238] ACPI: ACPI bus type pnp unregistered [ 0.321258] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.321263] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.321267] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.321272] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.321276] system 00:00: iomem range 0x100000-0x5f6d33ff could not be reserved [ 0.321280] system 00:00: iomem range 0x5f6d3400-0x5f6fffff has been reserved [ 0.321284] system 00:00: iomem range 0x5f700000-0x5f7fffff has been reserved [ 0.321289] system 00:00: iomem range 0x5f700000-0x5fefffff could not be reserved [ 0.321293] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved [ 0.321298] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.321302] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.321306] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.321311] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved [ 0.321315] system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved [ 0.321319] system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved [ 0.321323] system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved [ 0.321328] system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved [ 0.321332] system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved [ 0.321336] system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.321345] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.321353] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.321358] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 0.321362] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 0.321366] system 00:03: ioport range 0x809-0x809 has been reserved [ 0.321375] system 00:08: ioport range 0xc80-0xcff could not be reserved [ 0.321379] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.321383] system 00:08: ioport range 0x920-0x92f has been reserved [ 0.321387] system 00:08: ioport range 0xcb0-0xcbf has been reserved [ 0.321391] system 00:08: ioport range 0x930-0x97f has been reserved [ 0.321400] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.356649] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.356654] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.356662] pci 0000:00:1c.0: MEM window: 0xefd00000-0xefdfffff [ 0.356669] pci 0000:00:1c.0: PREFETCH window: 0x00000060000000-0x000000601fffff [ 0.356678] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c [ 0.356683] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.356691] pci 0000:00:1c.3: MEM window: 0xefa00000-0xefcfffff [ 0.356697] pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e01fffff [ 0.356707] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.356710] pci 0000:00:1e.0: IO window: disabled [ 0.356717] pci 0000:00:1e.0: MEM window: 0xef900000-0xef9fffff [ 0.356723] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.356741] alloc irq_desc for 16 on node -1 [ 0.356743] alloc kstat_irqs on node -1 [ 0.356750] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.356757] pci 0000:00:1c.0: setting latency timer to 64 [ 0.356769] alloc irq_desc for 19 on node -1 [ 0.356771] alloc kstat_irqs on node -1 [ 0.356775] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.356782] pci 0000:00:1c.3: setting latency timer to 64 [ 0.356791] pci 0000:00:1e.0: setting latency timer to 64 [ 0.356797] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.356801] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.356805] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.356809] pci_bus 0000:0b: resource 1 mem: [0xefd00000-0xefdfffff] [ 0.356813] pci_bus 0000:0b: resource 2 pref mem [0x60000000-0x601fffff] [ 0.356817] pci_bus 0000:0c: resource 0 io: [0xd000-0xdfff] [ 0.356821] pci_bus 0000:0c: resource 1 mem: [0xefa00000-0xefcfffff] [ 0.356825] pci_bus 0000:0c: resource 2 pref mem [0xe0000000-0xe01fffff] [ 0.356829] pci_bus 0000:03: resource 1 mem: [0xef900000-0xef9fffff] [ 0.356833] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.356836] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.356885] NET: Registered protocol family 2 [ 0.357013] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.357407] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.358239] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.358649] TCP: Hash tables configured (established 131072 bind 65536) [ 0.358652] TCP reno registered [ 0.358766] NET: Registered protocol family 1 [ 0.358791] pci 0000:00:02.0: Boot video device [ 0.358981] Trying to unpack rootfs image as initramfs... [ 1.676314] Freeing initrd memory: 40852k freed [ 1.707218] Simple Boot Flag at 0x79 set to 0x80 [ 1.708215] Scanning for low memory corruption every 60 seconds [ 1.708574] audit: initializing netlink socket (disabled) [ 1.708593] type=2000 audit(1268710911.708:1): initialized [ 1.720277] highmem bounce pool size: 64 pages [ 1.720284] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.724705] VFS: Disk quotas dquot_6.5.2 [ 1.724825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.725899] fuse init (API version 7.13) [ 1.726244] msgmni has been set to 1733 [ 1.726568] alg: No test for stdrng (krng) [ 1.726581] io scheduler noop registered [ 1.726584] io scheduler anticipatory registered [ 1.726587] io scheduler deadline registered [ 1.726684] io scheduler cfq registered (default) [ 1.726892] alloc irq_desc for 24 on node -1 [ 1.726895] alloc kstat_irqs on node -1 [ 1.726910] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.726923] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.727228] alloc irq_desc for 25 on node -1 [ 1.727231] alloc kstat_irqs on node -1 [ 1.727241] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X [ 1.727253] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.727590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.727743] pciehp 0000:00:1c.0:pcie04: Bypassing BIOS check for pciehp use on 0000:00:1c.0 [ 1.727754] pciehp 0000:00:1c.0:pcie04: Hotplug Controller: [ 1.727758] pciehp 0000:00:1c.0:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.0 IRQ 24 [ 1.727761] pciehp 0000:00:1c.0:pcie04: Vendor ID : 0x8086 [ 1.727764] pciehp 0000:00:1c.0:pcie04: Device ID : 0x27d0 [ 1.727767] pciehp 0000:00:1c.0:pcie04: Subsystem ID : 0x0000 [ 1.727770] pciehp 0000:00:1c.0:pcie04: Subsystem Vendor ID : 0x0000 [ 1.727774] pciehp 0000:00:1c.0:pcie04: PCIe Cap offset : 0x40 [ 1.727777] pciehp 0000:00:1c.0:pcie04: PCI resource [7] : 0x1000@0x2000 [ 1.727781] pciehp 0000:00:1c.0:pcie04: PCI resource [8] : 0x100000@0xefd00000 [ 1.727785] pciehp 0000:00:1c.0:pcie04: PCI resource [9] : 0x200000@0x60000000 [ 1.727789] pciehp 0000:00:1c.0:pcie04: Slot Capabilities : 0x0010a0e0 [ 1.727792] pciehp 0000:00:1c.0:pcie04: Physical Slot Number : 2 [ 1.727795] pciehp 0000:00:1c.0:pcie04: Attention Button : no [ 1.727798] pciehp 0000:00:1c.0:pcie04: Power Controller : no [ 1.727801] pciehp 0000:00:1c.0:pcie04: MRL Sensor : no [ 1.727804] pciehp 0000:00:1c.0:pcie04: Attention Indicator : no [ 1.727807] pciehp 0000:00:1c.0:pcie04: Power Indicator : no [ 1.727811] pciehp 0000:00:1c.0:pcie04: Hot-Plug Surprise : yes [ 1.727814] pciehp 0000:00:1c.0:pcie04: EMI Present : no [ 1.727816] pciehp 0000:00:1c.0:pcie04: Command Completed : yes [ 1.727821] pciehp 0000:00:1c.0:pcie04: Slot Status : 0x0040 [ 1.727826] pciehp 0000:00:1c.0:pcie04: Slot Control : 0x0008 [ 1.727830] pciehp 0000:00:1c.0:pcie04: Link Active Reporting supported [ 1.727870] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 [ 1.727875] pciehp 0000:00:1c.0:pcie04: Registering domain:bus:dev=0000:0b:00 sun=2 [ 1.727937] pciehp 0000:00:1c.0:pcie04: get_power_status: physical_slot = 2 [ 1.727943] pciehp 0000:00:1c.0:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 0 [ 1.727946] pciehp 0000:00:1c.0:pcie04: get_attention_status: physical_slot = 2 [ 1.727952] pciehp 0000:00:1c.0:pcie04: pciehp_get_attention_status: SLOTCTRL 58, value read 0 [ 1.727955] pciehp 0000:00:1c.0:pcie04: get_latch_status: physical_slot = 2 [ 1.727960] pciehp 0000:00:1c.0:pcie04: get_adapter_status: physical_slot = 2 [ 1.828017] pciehp 0000:00:1c.0:pcie04: pciehp_check_link_status: lnk_status = 3011 [ 1.828025] pciehp 0000:00:1c.0:pcie04: Device 0000:0b:00.0 already exists at 0000:0b:00, cannot hot-add [ 1.828036] pciehp 0000:00:1c.0:pcie04: Cannot add device at 0000:0b:00 [ 1.828047] pciehp 0000:00:1c.0:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 38 [ 1.828052] pciehp 0000:00:1c.0:pcie04: pciehp_get_attention_status: SLOTCTRL 58, value read 38 [ 1.828060] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 1.828068] pciehp 0000:00:1c.3:pcie04: Bypassing BIOS check for pciehp use on 0000:00:1c.3 [ 1.828078] pciehp 0000:00:1c.3:pcie04: Hotplug Controller: [ 1.828081] pciehp 0000:00:1c.3:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.3 IRQ 25 [ 1.828084] pciehp 0000:00:1c.3:pcie04: Vendor ID : 0x8086 [ 1.828088] pciehp 0000:00:1c.3:pcie04: Device ID : 0x27d6 [ 1.828091] pciehp 0000:00:1c.3:pcie04: Subsystem ID : 0x0000 [ 1.828094] pciehp 0000:00:1c.3:pcie04: Subsystem Vendor ID : 0x0000 [ 1.828097] pciehp 0000:00:1c.3:pcie04: PCIe Cap offset : 0x40 [ 1.828101] pciehp 0000:00:1c.3:pcie04: PCI resource [7] : 0x1000@0xd000 [ 1.828104] pciehp 0000:00:1c.3:pcie04: PCI resource [8] : 0x300000@0xefa00000 [ 1.828108] pciehp 0000:00:1c.3:pcie04: PCI resource [9] : 0x200000@0xe0000000 [ 1.828112] pciehp 0000:00:1c.3:pcie04: Slot Capabilities : 0x0028a0e0 [ 1.828115] pciehp 0000:00:1c.3:pcie04: Physical Slot Number : 5 [ 1.828118] pciehp 0000:00:1c.3:pcie04: Attention Button : no [ 1.828121] pciehp 0000:00:1c.3:pcie04: Power Controller : no [ 1.828124] pciehp 0000:00:1c.3:pcie04: MRL Sensor : no [ 1.828127] pciehp 0000:00:1c.3:pcie04: Attention Indicator : no [ 1.828130] pciehp 0000:00:1c.3:pcie04: Power Indicator : no [ 1.828133] pciehp 0000:00:1c.3:pcie04: Hot-Plug Surprise : yes [ 1.828136] pciehp 0000:00:1c.3:pcie04: EMI Present : no [ 1.828139] pciehp 0000:00:1c.3:pcie04: Command Completed : yes [ 1.828144] pciehp 0000:00:1c.3:pcie04: Slot Status : 0x0000 [ 1.828148] pciehp 0000:00:1c.3:pcie04: Slot Control : 0x0008 [ 1.828153] pciehp 0000:00:1c.3:pcie04: Link Active Reporting supported [ 1.828163] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 [ 1.828167] pciehp 0000:00:1c.3:pcie04: Registering domain:bus:dev=0000:0c:00 sun=5 [ 1.828234] pciehp 0000:00:1c.3:pcie04: get_power_status: physical_slot = 5 [ 1.828240] pciehp 0000:00:1c.3:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 0 [ 1.828243] pciehp 0000:00:1c.3:pcie04: get_attention_status: physical_slot = 5 [ 1.828248] pciehp 0000:00:1c.3:pcie04: pciehp_get_attention_status: SLOTCTRL 58, value read 0 [ 1.828252] pciehp 0000:00:1c.3:pcie04: get_latch_status: physical_slot = 5 [ 1.828257] pciehp 0000:00:1c.3:pcie04: get_adapter_status: physical_slot = 5 [ 1.828283] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 1.828334] pciehp: pcie_port_service_register = 0 [ 1.828337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.829072] ACPI: AC Adapter [AC] (on-line) [ 1.829288] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.829748] ACPI: Lid Switch [LID] [ 1.829851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.829859] ACPI: Power Button [PBTN] [ 1.829959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.829963] ACPI: Sleep Button [SBTN] [ 1.830865] ACPI: SSDT 5f6d4134 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 1.831267] ACPI: SSDT 5f6d3ee9 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 1.831757] processor LNXCPU:00: registered as cooling_device0 [ 1.832232] ACPI: SSDT 5f6d4378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 1.832566] ACPI: SSDT 5f6d40af 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 1.833066] processor LNXCPU:01: registered as cooling_device1 [ 1.840543] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.840553] ACPI: Thermal Zone [THM] (45 C) [ 1.863401] Linux agpgart interface v0.103 [ 1.863510] ipmi message handler version 39.2 [ 1.863518] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.870036] brd: module loaded [ 1.871783] loop: module loaded [ 1.871926] ACPI: Battery Slot [BAT0] (battery present) [ 1.872285] ata_piix 0000:00:1f.2: version 2.13 [ 1.872306] alloc irq_desc for 17 on node -1 [ 1.872308] alloc kstat_irqs on node -1 [ 1.872317] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.872324] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.872368] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.872462] scsi0 : ata_piix [ 1.872649] scsi1 : ata_piix [ 1.873799] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 1.873803] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 1.874030] Fixed MDIO Bus: probed [ 1.874038] PPP generic driver version 2.4.2 [ 1.874329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.874353] alloc irq_desc for 20 on node -1 [ 1.874356] alloc kstat_irqs on node -1 [ 1.874361] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.874376] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.874381] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.874466] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.874493] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.874507] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.878406] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.878513] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 1.893015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.893146] usb usb1: configuration #1 chosen from 1 choice [ 1.893228] hub 1-0:1.0: USB hub found [ 1.893237] hub 1-0:1.0: 8 ports detected [ 1.893360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.893417] uhci_hcd: USB Universal Host Controller Interface driver [ 1.893446] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.893454] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.893458] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.893534] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.893564] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 1.893708] usb usb2: configuration #1 chosen from 1 choice [ 1.893782] hub 2-0:1.0: USB hub found [ 1.893791] hub 2-0:1.0: 2 ports detected [ 1.893849] alloc irq_desc for 21 on node -1 [ 1.893852] alloc kstat_irqs on node -1 [ 1.893858] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.893865] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.893870] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.893948] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.893985] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 1.894132] usb usb3: configuration #1 chosen from 1 choice [ 1.894205] hub 3-0:1.0: USB hub found [ 1.894214] hub 3-0:1.0: 2 ports detected [ 1.894270] alloc irq_desc for 22 on node -1 [ 1.894272] alloc kstat_irqs on node -1 [ 1.894278] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.894285] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.894290] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.894367] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.894405] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 1.894542] usb usb4: configuration #1 chosen from 1 choice [ 1.894615] hub 4-0:1.0: USB hub found [ 1.894623] hub 4-0:1.0: 2 ports detected [ 1.894677] alloc irq_desc for 23 on node -1 [ 1.894680] alloc kstat_irqs on node -1 [ 1.894685] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.894693] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.894697] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.894772] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.894810] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 1.894946] usb usb5: configuration #1 chosen from 1 choice [ 1.895020] hub 5-0:1.0: USB hub found [ 1.895029] hub 5-0:1.0: 2 ports detected [ 1.895248] usbcore: registered new interface driver usbserial [ 1.895302] USB Serial support registered for generic [ 1.895361] usbcore: registered new interface driver usbserial_generic [ 1.895364] usbserial: USB Serial Driver core [ 1.895504] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.902445] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.902452] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.902713] mice: PS/2 mouse device common for all mice [ 1.902967] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.903011] rtc_cmos 00:06: RTC can wake from S4 [ 1.903092] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.903127] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.903385] device-mapper: uevent: version 1.0.3 [ 1.903576] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 1.903676] device-mapper: multipath: version 1.1.0 loaded [ 1.903680] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.904350] cpuidle: using governor ladder [ 1.905145] cpuidle: using governor menu [ 1.905846] TCP cubic registered [ 1.906283] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.906406] NET: Registered protocol family 10 [ 1.906960] lo: Disabled Privacy Extensions [ 1.907350] NET: Registered protocol family 17 [ 1.907426] Bluetooth: L2CAP ver 2.14 [ 1.907429] Bluetooth: L2CAP socket layer initialized [ 1.907432] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.907435] Bluetooth: SCO socket layer initialized [ 1.907483] Bluetooth: RFCOMM TTY layer initialized [ 1.907487] Bluetooth: RFCOMM socket layer initialized [ 1.907489] Bluetooth: RFCOMM ver 1.11 [ 1.908081] Using IPI No-Shortcut mode [ 1.908320] PM: Resume from disk failed. [ 1.908343] registered taskstats version 1 [ 1.908813] Magic number: 2:630:664 [ 1.908934] rtc_cmos 00:06: setting system clock to 2010-03-16 03:41:52 UTC (1268710912) [ 1.908939] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.908942] EDD information not available. [ 2.036723] ata1.00: ATA-8: FUJITSU MHZ2080BH G2, 00850009, max UDMA/100 [ 2.036728] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.036849] ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B103, max UDMA/33 [ 2.044504] ata1.00: configured for UDMA/100 [ 2.044645] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2080B 0085 PQ: 0 ANSI: 5 [ 2.045092] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.045129] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.045171] sd 0:0:0:0: [sda] Write Protect is off [ 2.045175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.045204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.045357] sda: sda1 sda2 < sda5 > [ 2.046431] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.056354] ata2.00: configured for UDMA/33 [ 2.061657] scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B103 PQ: 0 ANSI: 5 [ 2.072770] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.072774] Uniform CD-ROM driver Revision: 3.20 [ 2.073008] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.073217] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.073261] Freeing unused kernel memory: 512k freed [ 2.073568] Write protecting the kernel text: 4624k [ 2.073627] Write protecting the kernel read-only data: 1812k [ 2.187474] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 2.188261] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 2.219871] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.307132] acpi device:27: registered as cooling_device2 [ 2.307665] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input4 [ 2.307718] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 2.307784] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 2.307872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input5 [ 2.307909] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 2.350623] [drm] Initialized drm 1.1.0 20060810 [ 2.391112] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.391119] i915 0000:00:02.0: setting latency timer to 64 [ 2.394428] [drm] set up 7M of stolen space [ 2.900454] [drm] TV-14: set mode NTSC 480i 0 [ 3.046943] fb0: inteldrmfb frame buffer device [ 3.046947] registered panic notifier [ 3.046957] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.056435] Console: switching to colour frame buffer device 160x50 [ 3.136764] [drm] LVDS-8: set mode 1280x800 1d [ 3.585631] PM: Starting manual resume from disk [ 3.585636] PM: Resume from partition 8:5 [ 3.585638] PM: Checking hibernation image. [ 3.585821] PM: Error -22 checking image file [ 3.585824] PM: Resume from disk failed. [ 3.668953] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.356758] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 6.118868] udev: starting version 147 [ 8.190141] cfg80211: Calling CRDA to update world regulatory domain [ 8.546153] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.591385] cfg80211: World regulatory domain updated: [ 8.591389] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.591394] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.591397] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.591401] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.591405] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.591408] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.737555] RPC: Registered udp transport module. [ 8.737559] RPC: Registered tcp transport module. [ 8.737561] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.942370] sdhci: Secure Digital Host Controller Interface driver [ 8.942375] sdhci: Copyright(c) Pierre Ossman [ 9.210562] intel_rng: FWH not detected [ 9.658882] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19) [ 9.658905] alloc irq_desc for 18 on node -1 [ 9.658908] alloc kstat_irqs on node -1 [ 9.658916] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 9.662414] Registered led device: mmc0:: [ 9.663526] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 10.274116] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 [ 10.312985] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 10.473255] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.532212] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 10.532336] b44.c:v2.0 [ 10.554164] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:20:b9:c6 [ 10.840181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 10.840529] acpiphp_glue: Slot 1 already registered by another hotplug driver [ 10.927484] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.853526] ath5k 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.853559] ath5k 0000:0b:00.0: setting latency timer to 64 [ 11.853921] ath5k 0000:0b:00.0: registered as 'phy0' [ 12.005556] ath: EEPROM regdomain: 0x62 [ 12.005560] ath: EEPROM indicates we should expect a direct regpair map [ 12.005566] ath: Country alpha2 being used: 00 [ 12.005568] ath: Regpair used: 0x62 [ 12.053126] phy0: Selected rate control algorithm 'minstrel' [ 12.054029] Registered led device: ath5k-phy0::rx [ 12.054054] Registered led device: ath5k-phy0::tx [ 12.054058] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61) [ 12.287730] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.289144] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 12.289148] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 12.289151] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 15.686125] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 16.633081] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.927208] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 16.927281] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 17.100510] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 17.100612] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 17.295456] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.474253] [drm] TV-14: set mode NTSC 480i 0 [ 17.614793] [drm] TV-14: set mode NTSC 480i 0 [ 18.021834] [drm] TV-14: set mode NTSC 480i 0 [ 18.161931] [drm] TV-14: set mode NTSC 480i 0 [ 19.858602] IPv6 over IPv4 tunneling driver [ 19.860472] sit0: Disabled Privacy Extensions [ 19.861912] 6in4: Disabled Privacy Extensions [ 20.816214] b44: eth0: Link is up at 100 Mbps, full duplex. [ 20.816222] b44: eth0: Flow control is off for TX and off for RX. [ 20.816551] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.276951] tun: Universal TUN/TAP device driver, 1.6 [ 23.276957] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 23.278991] tun0: Disabled Privacy Extensions [ 24.299469] NET: Registered protocol family 24 [ 25.409052] wlan0: no IPv6 routers present [ 27.637184] [drm] TV-14: set mode NTSC 480i 0 [ 27.778272] [drm] TV-14: set mode NTSC 480i 0 [ 28.057078] [drm] TV-14: set mode NTSC 480i 0 [ 28.198754] [drm] TV-14: set mode NTSC 480i 0 [ 28.504816] [drm] TV-14: set mode NTSC 480i 0 [ 28.646743] [drm] TV-14: set mode NTSC 480i 0 [ 31.196028] eth0: no IPv6 routers present [2] lspci output: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
