On 02/10/2010 10:27 AM, Bjorn Helgaas wrote:
> Hi Larry,
>
> Sorry to bother you again, but is there any chance you could send me
> a dmesg log from a 2.6.33-rcx kernel booted with "pci=use_crs"? I'd
> really like to understand why that is working, when it seems like it
> ought to fail.
No problem. This kernel is v2.6.33-rc7-10-g6339204 from Linus's tree. The output
of dmesg is attached.
Larry
Linux version 2.6.33-rc7-Linus-00010-g6339204 (finger@larrylap) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #182 SMP Mon Feb 8 13:51:44 CST 2010
Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part1 resume=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part5 splash=silent quiet nmi_watchdog=0 vga=0x317 pci=use_crs
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bbf50000 (usable)
BIOS-e820: 00000000bbf50000 - 00000000bbf65000 (ACPI data)
BIOS-e820: 00000000bbf65000 - 00000000bbf66000 (ACPI NVS)
BIOS-e820: 00000000bbf66000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
last_pfn = 0xbbf50 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-DFFFF write-protect
E0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f8090] f8090
init_memory_mapping: 0000000000000000-00000000bbf50000
0000000000 - 00bbe00000 page 2M
00bbe00000 - 00bbf50000 page 4k
kernel direct mapping tables up to bbf50000 @ 8000-d000
RAMDISK: 3722f000 - 37fef9f4
ACPI: RSDP 00000000000f80c0 00024 (v03 HPQOEM)
ACPI: XSDT 00000000bbf5d343 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: FACP 00000000bbf64874 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240)
ACPI: DSDT 00000000bbf5d3af 074C5 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000)
ACPI: FACS 00000000bbf65fc0 00040
ACPI: SLIC 00000000bbf649dc 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001)
ACPI: WDAT 00000000bbf64b52 00104 (v01 PTLTD WDATTBL 06040000 LTP 00000001)
ACPI: SRAT 00000000bbf64c56 000A0 (v01 AMD HAMMER 06040000 AMD 00000001)
ACPI: MCFG 00000000bbf64cf6 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: HPET 00000000bbf64d32 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: APIC 00000000bbf64d6a 00068 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: BOOT 00000000bbf64dd2 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: SSDT 00000000bbf64dfa 00206 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
NUMA: Allocated memnodemap from b000 - c840
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-00000000bbf50000
NODE_DATA [000000000000c840 - 000000000001283f]
bootmap [0000000000013000 - 000000000002a7ef] pages 18
(13 early reservations) ==> bootmem [0000000000 - 00bbf50000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00023c46e8] TEXT DATA BSS ==> [0001000000 - 00023c46e8]
#2 [003722f000 - 0037fef9f4] RAMDISK ==> [003722f000 - 0037fef9f4]
#3 [00023c5000 - 00023c5188] BRK ==> [00023c5000 - 00023c5188]
#4 [00000f80a0 - 0000100000] BIOS reserved ==> [00000f80a0 - 0000100000]
#5 [00000f8090 - 00000f80a0] MP-table mpf ==> [00000f8090 - 00000f80a0]
#6 [000009e000 - 000009e571] BIOS reserved ==> [000009e000 - 000009e571]
#7 [000009e69d - 00000f8090] BIOS reserved ==> [000009e69d - 00000f8090]
#8 [000009e571 - 000009e69d] MP-table mpc ==> [000009e571 - 000009e69d]
#9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#11 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#12 [000000b000 - 000000c840] MEMNODEMAP ==> [000000b000 - 000000c840]
[ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002800000-ffff8800051fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009e
0: 0x00000100 -> 0x000bbf50
On node 0 totalpages: 769774
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3835 pages, LIFO batch:0
DMA32 zone: 10470 pages used for memmap
DMA32 zone: 755306 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880005200000 s84184 r8192 d22312 u1048576
pcpu-alloc: s84184 r8192 d22312 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 759141
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part1 resume=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part5 splash=silent quiet nmi_watchdog=0 vga=0x317 pci=use_crs
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 5000000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 3001132k/3079488k available (3162k kernel code, 392k absent, 77964k reserved, 5245k data, 580k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 5855 kB
per task-struct memory footprint: 1920 bytes
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2000.243 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.48 BogoMIPS (lpj=8000972)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
tseg: 00bbf80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 TL-60 stepping 02
lockdep: fixing up alternatives.
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (8000.88 BogoMIPS).
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Switch to broadcast mode on CPU0
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, fe0bffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [c0000000, fcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: can't allocate host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.3: reg 10: [mem 0xfc200000-0xfc27ffff]
pci 0000:00:02.0: reg 10: [mem 0xfc486000-0xfc486fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfc489000-0xfc4890ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xfc487000-0xfc487fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0xfc489400-0xfc4894ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf]
pci 0000:00:07.0: reg 10: [mem 0xfc480000-0xfc483fff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
pci 0000:00:09.0: reg 24: [mem 0xfc484000-0xfc485fff]
pci 0000:00:0a.0: reg 10: [mem 0xfc488000-0xfc488fff]
pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
pci 0000:00:0a.0: reg 18: [mem 0xfc489c00-0xfc489cff]
pci 0000:00:0a.0: reg 1c: [mem 0xfc489800-0xfc48980f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:12.0: reg 10: [mem 0xf4000000-0xf4ffffff]
pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:12.0: reg 1c: [mem 0xf0000000-0xf0ffffff 64bit]
pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:09.0: reg 10: [mem 0x00000000-0x000007ff]
pci 0000:01:09.0: supports D1 D2
pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:09.0: PME# disabled
pci 0000:01:09.1: reg 10: [mem 0xfc100800-0xfc1008ff]
pci 0000:01:09.1: supports D1 D2
pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:09.1: PME# disabled
pci 0000:01:09.2: reg 10: [mem 0xfc100c00-0xfc100cff]
pci 0000:01:09.2: supports D1 D2
pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:09.2: PME# disabled
pci 0000:01:09.3: reg 10: [mem 0xfc101000-0xfc1010ff]
pci 0000:01:09.3: supports D1 D2
pci 0000:01:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:09.3: PME# disabled
pci 0000:01:09.4: reg 10: [mem 0xfc101400-0xfc1014ff]
pci 0000:01:09.4: supports D1 D2
pci 0000:01:09.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:09.4: PME# disabled
pci 0000:00:08.0: PCI bridge to [bus 01-02] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:0c.0: PCI bridge to [bus 06-07]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:04:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:00:0d.0: PCI bridge to [bus 04-05]
pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [Z012] (IRQs 16) *10
ACPI: PCI Interrupt Link [Z013] (IRQs 16) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfec80000-0xfec80fff] has been reserved
system 00:00: [mem 0xfef00000-0xfef00fff] has been reserved
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [io 0x0360-0x0361] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x1000-0x107f] has been reserved
system 00:0b: [io 0x1080-0x10ff] has been reserved
system 00:0b: [io 0x1400-0x147f] has been reserved
system 00:0b: [io 0x1480-0x14ff] has been reserved
system 00:0b: [io 0x1800-0x187f] has been reserved
system 00:0b: [io 0x1880-0x18ff] has been reserved
pci 0000:00:12.0: BAR 6: assigned [mem 0x000a0000-0x000bffff pref]
pci 0000:01:09.0: BAR 0: assigned [mem 0xfc100000-0xfc1007ff]
pci 0000:01:09.0: BAR 0: set to [mem 0xfc100000-0xfc1007ff] (PCI address [0xfc100000-0xfc1007ff]
pci 0000:00:08.0: PCI bridge to [bus 01-02]
pci 0000:00:08.0: bridge window [io disabled]
pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:08.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 06-07]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 04-05]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 1 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 2 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 3 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 4 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 5 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 6 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 12 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 13 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 14 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 15 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfc1fffff]
pci_bus 0000:01: resource 3 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 4 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 6 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 7 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 8 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 9 [mem 0x000cc000-0x000cffff]
pci_bus 0000:01: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 13 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 14 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 15 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:04: resource 1 [mem 0xfc000000-0xfc0fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:12.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14082k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1265798280.757:1): initialized
msgmni has been set to 5889
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001e00000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos: dev (254:0)
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input1
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input2
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2010-02-10 10:38:02 UTC (1265798282)
Freeing unused kernel memory: 580k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 916k freed
Freeing unused kernel memory: 592k freed
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (60 C)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (58 C)
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x0560 rev 0xa1)
amd74xx 0000:00:06.0: IDE port disabled
amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30c0-0x30c7
Probing IDE interface ide0...
hda: Optiarc DVD RW AD-7561A, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: processor limited to max C-state 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 17, io mem 0xfc489000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ACPI: PCI Interrupt Link [Z013] enabled at IRQ 16
ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z013] -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 16, io mem 0xfc489400
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
udev: starting version 146
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
SCSI subsystem initialized
usb 1-4: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 17, io mem 0xfc486000
libata version 3.00 loaded.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: irq 26 for MSI/MSI-X
ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
ahci 0000:00:09.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484100 irq 26
ata2: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484180 irq 26
ata3: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484200 irq 26
ata4: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484280 irq 26
ACPI: PCI Interrupt Link [Z012] enabled at IRQ 16
ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z012] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 16, io mem 0xfc487000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MK2546GSX, LB014C, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT4-fs (sda1): (no)acl options not supported
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (sda1): (no)acl options not supported
udev: starting version 146
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:0a.0: setting latency timer to 64
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 21
b43-pci-bridge 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 21 (level, low) -> IRQ 21
b43-pci-bridge 0000:04:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243)
ssb: SPROM revision 3 detected.
ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:72:4c:a5:52
forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x3040
i2c i2c-1: nForce2 SMBus adapter at 0x3000
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:07.0: irq 27 for MSI/MSI-X
HDA Intel 0000:00:07.0: setting latency timer to 64
b43-phy0: Broadcom 4311 WLAN found (core revision 13)
b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 9
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
udev: renamed network interface wlan0 to wlan7
Adding 2104444k swap on /dev/sda5. Priority:-1 extents:1 across:2104444k
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): using internal journal
EXT3-fs (sda7): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with writeback data mode
EXT4-fs (sda6): mounted filesystem with ordered data mode
fuse init (API version 7.13)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
powernow-k8: Found 1 AMD Turion(tm) 64 X2 TL-60 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
Clocksource tsc unstable (delta = -116131215 ns)
forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
eth0: no link during initialization.
b43 ssb0:0: firmware: requesting b43/ucode13.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals13.fw
b43-phy0: Loading firmware version 508.1107 (2009-06-26 19:16:02)
b43-phy0 debug: Chip initialized
b43-phy0 debug: 64-bit DMA initialized
b43-phy0 debug: QoS enabled
b43-phy0 debug: Wireless interface started
b43-phy0 debug: Adding Interface type 2
NET: Registered protocol family 17
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
wlan7: direct probe to AP 00:14:bf:85:49:fa (try 1)
wlan7: direct probe to AP 00:14:bf:85:49:fa (try 1)
wlan7: direct probe responded
wlan7: authenticate with AP 00:14:bf:85:49:fa (try 1)
wlan7: authenticated
wlan7: associate with AP 00:14:bf:85:49:fa (try 1)
wlan7: RX AssocResp from 00:14:bf:85:49:fa (capab=0x411 status=0 aid=1)
wlan7: associated
b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:14:bf:85:49:fa
