Thomas Renninger <trenn@xxxxxxx> reported on IBM x3330 booting a latest kernel on this machine results in: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: SCI (IRQ30) allocation failed ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161) ACPI: Unable to start the ACPI Interpreter Later all kind of devices fail... and bisect it down to this commit: commit b9c61b70075c87a8612624736faf4a2de5b1ed30 x86/pci: update pirq_enable_irq() to setup io apic routing it turns out we need to set irq routing for the sci on ioapic1 early. -v2: make it work without sparseirq too. -v3: fix checkpatch.pl warning, and cc to stable Reported-by: Thomas Renninger <trenn@xxxxxxx> Bisected-by: Thomas Renninger <trenn@xxxxxxx> Tested-by: Thomas Renninger <trenn@xxxxxxx> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx> Cc: stable@xxxxxxxxxx --- arch/x86/include/asm/io_apic.h | 1 + arch/x86/kernel/acpi/boot.c | 9 ++++++- arch/x86/kernel/apic/io_apic.c | 50 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 1 deletions(-) diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 7c7c16c..5f61f6e 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic); struct io_apic_irq_attr; extern int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr); +void setup_IO_APIC_irq_extra(u32 gsi); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); extern void ioapic_insert_resources(void); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0acbcdf..5c96b75 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { *irq = gsi; + +#ifdef CONFIG_X86_IO_APIC + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + setup_IO_APIC_irq_extra(gsi); +#endif + return 0; } @@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif - acpi_gsi_to_irq(plat_gsi, &irq); + irq = plat_gsi; + return irq; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 75ba3d0..ee2fba1 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1541,6 +1541,56 @@ static void __init setup_IO_APIC_irqs(void) } /* + * for the gsit that is not in first ioapic + * but could not use acpi_register_gsi() + * like some special sci in IBM x3330 + */ +void setup_IO_APIC_irq_extra(u32 gsi) +{ + int apic_id = 0, pin, idx, irq; + int node = cpu_to_node(boot_cpu_id); + struct irq_desc *desc; + struct irq_cfg *cfg; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + apic_id = mp_find_ioapic(gsi); + if (apic_id < 0) + return; + + pin = mp_find_ioapic_pin(apic_id, gsi); + idx = find_irq_entry(apic_id, pin, mp_INT); + if (idx == -1) + return; + + irq = pin_2_irq(idx, apic_id, pin); +#ifdef CONFIG_SPARSE_IRQ + desc = irq_to_desc(irq); + if (desc) + return; +#endif + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + return; + } + + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, apic_id, pin); + + if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) { + pr_debug("Pin %d-%d already programmed\n", + mp_ioapics[apic_id].apicid, pin); + return; + } + set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); + + setup_IO_APIC_irq(apic_id, pin, irq, desc, + irq_trigger(idx), irq_polarity(idx)); +} + +/* * Set up the timer pin, possibly with the 8259A-master behind. */ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin, -- 1.6.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html