Re: Strange EHCI/OHCI IRQ and other PCI errors on boot with 2.6.32 (which 2.6.26 did not see) on Geode LX/CS5536.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 20 Jan 2010, Lennart Sorensen wrote:

> On Wed, Jan 20, 2010 at 03:20:46PM -0500, Alan Stern wrote:
> > Okay, this means that something else is affecting the IRQ line.
> 
> Yep.  I went and disabled irq5 on the LPC bus, and that didn't help.
> 
> > > Interestingly the number of interrupts listed in /proc/interrupts is
> > > exactly 300000.
> > 
> > That's probably because the kernel disabled the IRQ after 100000 
> > unhandled interrupts, and re-enabled it each time a new device was
> > registered for that IRQ.
> 
> Certainly seems to be the case.
> 
> > Or you could just stop using USB on the old box.  :-)
> 
> Well I just tried another box, and same thing.
> 
> If I boot with 'irqpoll' then everything seems fine.
> 
> Any idea how I can figure out why irqpoll makes it happy?  Does it give
> any reports anywhere about misrouted irqs?

Not that I know of.

Does 2.6.26 fail on the new machine?

Are you using a .config different from the one that used to work with 
2.6.26?

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux