Add function to direct Legacy VGA I/O traffic to correct I/O Hub.
Signed-off-by: Mike Travis <travis@xxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxxxx>
Cc: Alex Chiang <achiang@xxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Cyrill Gorcunov <gorcunov@xxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Robin Holt <holt@xxxxxxx>
Cc: Rafael J. Wysocki <rjw@xxxxxxx>
Cc: Adam Jackson <ajax@xxxxxxxx>
Cc: Kenji Kaneshige <kaneshige.kenji@xxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Gaetan Nadon <memsize@xxxxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Aaron Plattner <aplattner@xxxxxxxxxx>
Cc: Jack Steiner <steiner@xxxxxxx>
Cc: Tiago Vignatti <tiago.vignatti@xxxxxxxxx>
Cc: Cliff Wickman <cpw@xxxxxxx>
Cc: Matthew Wilcox <willy@xxxxxxxxxxxxxxx>
Cc: Christian Zander <chzander@xxxxxxxxxx>
Cc: Yu Zhao <yu.zhao@xxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-pci@xxxxxxxxxxxxxxx
Cc: x86@xxxxxxxxxx
---
arch/x86/include/asm/uv/bios.h | 4 +++-
arch/x86/kernel/apic/x2apic_uv_x.c | 30 ++++++++++++++++++++++++++++++
arch/x86/kernel/bios_uv.c | 19 +++++++++++++++++++
3 files changed, 52 insertions(+), 1 deletion(-)
--- linux.orig/arch/x86/include/asm/uv/bios.h
+++ linux/arch/x86/include/asm/uv/bios.h
@@ -36,7 +36,8 @@
UV_BIOS_WATCHLIST_ALLOC,
UV_BIOS_WATCHLIST_FREE,
UV_BIOS_MEMPROTECT,
- UV_BIOS_GET_PARTITION_ADDR
+ UV_BIOS_GET_PARTITION_ADDR,
+ UV_BIOS_SET_LEGACY_VGA_TARGET
};
/*
@@ -96,6 +97,7 @@
extern int uv_bios_mq_watchlist_free(int, int);
extern s64 uv_bios_change_memprotect(u64, u64, enum uv_memprotect);
extern s64 uv_bios_reserved_page_pa(u64, u64 *, u64 *, u64 *);
+extern int uv_bios_set_legacy_vga_target(bool decode, int domain, int bus);
extern void uv_bios_init(void);
--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -20,6 +20,7 @@
#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/pci.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
@@ -34,6 +35,8 @@
DEFINE_PER_CPU(int, x2apic_extra_bits);
+#define PR_DEVEL(fmt, args...) pr_devel("%s: " fmt, __func__, args)
+
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
int uv_min_hub_revision_id;
@@ -557,6 +560,30 @@
#endif /* !CONFIG_HOTPLUG_CPU */
+/* Direct Legacy VGA I/O traffic to designated IOH */
+int uv_set_vga_state(struct pci_dev *pdev, bool decode,
+ unsigned int command_bits, bool change_bridge)
+{
+ int domain, bus, rc;
+
+ PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
+ pdev->devfn, decode, command_bits, change_bridge);
+
+ if (!change_bridge)
+ return 0;
+
+ if ((command_bits & PCI_COMMAND_IO) == 0)
+ return 0;
+
+ domain = pci_domain_nr(pdev->bus);
+ bus = pdev->bus->number;
+
+ rc = uv_bios_set_legacy_vga_target(decode, domain, bus);
+ PR_DEVEL("vga decode %d %x:%x, rc: %d\n", decode, domain, bus, rc);
+
+ return rc;
+}
+
/*
* Called on each cpu to initialize the per_cpu UV data area.
* FIXME: hotplug not supported yet
@@ -717,4 +744,7 @@
uv_cpu_init();
uv_scir_register_cpu_notifier();
proc_mkdir("sgi_uv", NULL);
+
+ /* register Legacy VGA I/O redirection handler */
+ pci_register_set_vga_state(uv_set_vga_state);
}
--- linux.orig/arch/x86/kernel/bios_uv.c
+++ linux/arch/x86/kernel/bios_uv.c
@@ -163,6 +163,25 @@
}
EXPORT_SYMBOL_GPL(uv_bios_freq_base);
+/*
+ * uv_bios_set_legacy_vga_target - Set Legacy VGA I/O Target
+ * @decode: true to enable target, false to disable target
+ * @domain: PCI domain number
+ * @bus: PCI bus number
+ *
+ * Returns:
+ * 0: Success
+ * -EINVAL: Invalid domain or bus number
+ * -ENOSYS: Capability not available
+ * -EBUSY: Legacy VGA I/O cannot be retargeted at this time
+ */
+int uv_bios_set_legacy_vga_target(bool decode, int domain, int bus)
+{
+ return uv_bios_call(UV_BIOS_SET_LEGACY_VGA_TARGET,
+ (u64)decode, (u64)domain, (u64)bus, 0, 0);
+}
+EXPORT_SYMBOL_GPL(uv_bios_set_legacy_vga_target);
+
#ifdef CONFIG_EFI
void uv_bios_init(void)
--
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
