Re: BAR 0: can't allocate resource

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I added linux-pci because this appears PCI-related.

On Tuesday 05 January 2010 02:18:02 am Alex Brooks wrote:
> I have a problem getting a couple of PCI cards to play nicely together. ...

> And (for both kernels) the output of lspci has the following line:
>   01:04.0 Unclassified device [0080]: Device 0002:0080

When you have only the 8-port serial card installed, it appears at
01:04.0.  When you have both cards installed, we don't see a new device,
and whatever is at 01:04.0 no longer looks like the octal UART.

> Hardware Details:
>  - My motherboard is a DigitalLogic MSM945.  It has a PC104 bus.
>  - I have two PC104 cards:
>    i)  8-port serial card (DiamondSystems Emerald-MM-8Plus)
>    ii) PC/104+ to MiniPCI Adapter (ConnectTech) (no MiniPCI cards installed).

Do you have these two cards?

  http://www.diamondsystems.com/products/emeraldmm8plus,
  http://www.connecttech.com/sub/Products/PC104plus_MiniPCI.asp

If so, both of those web pages mention jumpers that set the card's
PCI device ("slot") number.  My guess is that both of your cards
are set to the same number.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux