Re: kexec boot regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 15 2009, Yinghai Lu wrote:
> Jens Axboe wrote:
> > On Tue, Dec 15 2009, Yinghai Lu wrote:
> >> Jens Axboe wrote:
> >>> On Tue, Dec 15 2009, Yinghai Lu wrote:
> >>>> Jens Axboe wrote:
> >>>>> On Tue, Dec 15 2009, Yinghai Lu wrote:
> >>>>>> [   13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
> >>>>>>
> >>>>>> [   13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
> >>>>> On a "normal" non-kexec boot, I get:
> >>>>>
> >>>>> [   12.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
> >>>>> [   12.184075] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
> >>>>> [   12.216874] PCI: Using configuration type 1 for base access
> >>>>>
> >>>> can you run following scripts in first kernel?
> >>>>
> >>>> cd /sys/firmware/memmap
> >>>> for dir in * ; do
> >>>>   start=$(cat $dir/start)
> >>>>   end=$(cat $dir/end)
> >>>>   type=$(cat $dir/type)
> >>>>   printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" >> /tmp/memmap.txt
> >>>> done
> >>>>
> >>>> and send out /tmp/memmap.txt
> >>> Below.
> >>>
> >>>> what is your kexec tools version? could be too old?
> >>> It says:
> >>>
> >>> kexec-tools-testing 20080324 released 24th March 2008
> >>>
> >>>
> >>> 0000000000000000-0000000000098800 (System RAM)
> >>> 0000000000098800-00000000000a0000 (reserved)
> >>> 0000000079301000-0000000079303000 (reserved)
> >>> 0000000079303000-0000000079305000 (ACPI Tables)
> >>> 0000000079305000-0000000079310000 (reserved)
> >>> 0000000079310000-0000000079314000 (ACPI Tables)
> >>> 0000000079314000-0000000079319000 (reserved)
> >>> 0000000079319000-0000000079336000 (ACPI Tables)
> >>> 0000000079336000-0000000079358000 (reserved)
> >>> 0000000079358000-0000000079388000 (ACPI Tables)
> >>> 0000000079388000-00000000793c9000 (reserved)
> >>> 00000000793c9000-000000007968f000 (ACPI Tables)
> >>> 00000000000e0000-0000000000100000 (reserved)
> >>> 000000007968f000-00000000796bb000 (reserved)
> >>> 00000000796bb000-00000000799d8000 (ACPI Tables)
> >>> 00000000799d8000-0000000079bd8000 (ACPI Non-volatile Storage)
> >>> 0000000079bd8000-0000000079d8b000 (ACPI Tables)
> >>> 0000000079d8b000-0000000079d8c000 (reserved)
> >>> 0000000079d8c000-0000000079dc8000 (ACPI Tables)
> >>> 0000000079dc8000-0000000079dcb000 (reserved)
> >>> 0000000079dcb000-0000000079e1c000 (ACPI Tables)
> >>> 0000000079e1c000-0000000079e87000 (reserved)
> >>> 0000000079e87000-000000007bd5f000 (ACPI Tables)
> >>> 0000000000100000-0000000078c59000 (System RAM)
> >>> 000000007bd5f000-000000007be4f000 (reserved)
> >>> 000000007be4f000-000000007bf87000 (ACPI Tables)
> >> so following ranges are not passed to second kernel by kexec?
> > 
> > I have the following addition to my kexec kernel command line:
> > 
> > memmap=62G@4G
> > 
> > since that last big 62G RAM entry doesn't show up without it, that's why
> > you see a user defined e820 map as well in the boot logs. So a kexec'ed
> > kernel is missing at least that entry.
> > 
> > I just tried with the latest and greatest kexec-tools (2.0.1) and
> > there's no difference.
> 
> current kernel kexec 2.6.32 make numa and mmconf working on second kernel?

Just tested that configuration, and with current -git booted and
kexec into 2.6.32 gets me working numa but mmconf still complains:

[   15.669222] PCI: MCFG configuration 0: base 80000000 segment 0 buses
0 - 255
[   15.677166] PCI: Not using MMCONFIG.
[...]
[   15.971448] PCI: MCFG configuration 0: base 80000000 segment 0 buses
0 - 255
[   16.066995] PCI: BIOS Bug: MCFG area at 80000000 is not reserved in
ACPI motherboard resources
[   16.076705] PCI: Not using MMCONFIG.

SRAT looks good:

[...]
[    0.000000] SRAT: Node 0 PXM 0 0-80000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-480000000
[    0.000000] SRAT: Node 2 PXM 1 480000000-880000000
[    0.000000] SRAT: Node 1 PXM 2 880000000-c80000000
[    0.000000] SRAT: Node 3 PXM 3 c80000000-1080000000
[    0.000000] NUMA: Using 31 for the hash shift.
[snip same working NUMA config]

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux