Re: [PATCH 1/2] Uart driver for ST Microelectronics ConneXt(STA2X11/STA2X10).

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 16 Nov 2009 04:22:31 +0100
"Feng, Xiaobing" <Xiaobing.Feng@xxxxxxxxxxxxx> wrote:

> 
> Hi
> 	The  patch add VENDOR ID and DEVICE ID for all components on
> ST Microelectronics ConneXt board. It will be required by all drivers
> of ConneXt which will submit in the future monthes.
>   
> ST Microelectronics ConneXt(STA2X11/STA2X10), a PCI express
> multifunction chip that provides Input/Output capabilities.
> 
>   	 This patch has been checked by scripts/checkpatch.pl .

I'm assuming these IDs will be used by several source files?  If so,
then yeah they belong in pci_ids.h.  Unfortunately the patch didn't
apply, can you resend a new one against my linux-next branch?

The GPIO and serial drivers can probably go in via Andrew.

-- 
Jesse Barnes, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux