Re: pci-express hotplug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 27 2009, Jens Axboe wrote:
> On Mon, Oct 26 2009, Alex Chiang wrote:
> > * Jens Axboe <jens.axboe@xxxxxxxxxx>:
> > > > > acpiphp: enable_slot - physical_slot = 1
> > > > > acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> > > > > acpiphp: enable_slot - physical_slot = 2
> > > > > acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> > > > > acpiphp: enable_slot - physical_slot = 6
> > > > > acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> > > > > acpiphp: enable_slot - physical_slot = 7
> > > > > acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> > > > 
> > > > Hm, so for some reason, firmware on your machine is telling us
> > > > that it doesn't think cards are present and/or enabled.
> > > > 
> > > > Unfortunately, I don't know why your firmware would be saying
> > > > that. We could add some more debug printks to see what firmware
> > > > thinks about your system... Or we could just wait and see what
> > > > happens after you get your hardware replaced.
> > 
> > Let's try and find out why firmware is telling us that we didn't
> > get ACPI_STA_ALL.
> > 
> > Can you please apply this debug patch and send the output? Again,
> > please modprobe with debug=1.
> 
> acpiphp: enable_slot - physical_slot = 1
> power_on_slot
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
> get_slot_status
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL

Since this is a new board and BIOS, below is the info from loading
acpiphp with debug enabled and acpi debug enabled.

acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:00:05.0
acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:08:00
get_slot_status
get_slot_status
acpiphp: Slot [1] registered
acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:00:07.0
acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0b:00
get_slot_status
get_slot_status
acpiphp: Slot [2] registered
acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:80:07.0
acpiphp_glue: found ACPI PCI Hotplug slot 6 at PCI 0000:84:00
get_slot_status
get_slot_status
acpiphp: Slot [6] registered
acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:80:09.0
acpiphp_glue: found ACPI PCI Hotplug slot 7 at PCI 0000:87:00
get_slot_status
get_slot_status
acpiphp: Slot [7] registered
acpiphp_glue: Bus 0000:87 has 1 slot
acpiphp_glue: Bus 0000:84 has 1 slot
acpiphp_glue: Bus 0000:0b has 1 slot
acpiphp_glue: Bus 0000:08 has 1 slot
acpiphp_glue: Total 4 slots
acpiphp: Slot [1] unregistered
acpiphp: release_slot - physical_slot = 1
acpiphp: Slot [2] unregistered
acpiphp: release_slot - physical_slot = 2
acpiphp: Slot [6] unregistered
acpiphp: release_slot - physical_slot = 6
acpiphp: Slot [7] unregistered
acpiphp: release_slot - physical_slot = 7

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux