> I now have an AM3 based DFI DK 790FXB-M3H5 motherboard. This board has 3 regular > PCI slots and 3 PCI-E (16x) slots. I also have a PCI-E (x4) version of the VMIC-5565 > reflective memory card in one of the PCI-E slots and our gpiohsd card in one of the regular > PCI slots. All on the motherboard. No expansion slots being used. However I cannot get > data from our gpiohsd into the PCI-E VMIC-5565 cards memory. I can certainly get the data there > from a userland buffer, no problem. Just not from one card to the other directly. Oh and when > I put the regular PCI version of the VMIC into one of the regular PCI slots everything works > as expected. They are then both on the same PCI bus and no bridges are involved though. Have you verified with the vendor that such DMA works properly ? There is a long history of there being boards where some device to device DMA exploded or vanished. The arrival of PCI capture cards doing direct to video DMA cleaned the world up (eg the BT848) but I wouldn't be suprised if this recurred somewhere since they were popular and nobody really noticed as they didn't run such an unusual config. Also does the board have a true IOMMU in the PCI-E side of the system ? It's not a chipset I know. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
