Hi all, I will have to work with a board (SoC) with an ARM926EJ-S and several peripherals including a PCIe core that can act either as RC or EP I have to run on it Linux Kernel 2.6.19 or higher and I can start from a porting done for another similar board with the same ARM (but without PCIe) Unfortunately at the moment I have not the board yet and in the meanwhile I am doing some study and analysis activity. In the case of PCIe RC mode, I am wondering which activities I will have to do on Linux internals and PCI/PCIe Linux subsystem, in particular on the PCIe port driver (pcieport-driver in linux/drivers/pci/pcie). I can't understand if it is suitable for any Root Complex device or I will have to write a specific driver. In my case the PCIe Root Complex is delivered from Synopsys and is not a typical Intel PCI Express port that can be find on a normal PC any suggestions / indication ? thank you very much Stefano -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
