[PATCH 7/8] PCI hotplug: acpiphp: use generic pci_configure_slot()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch changes acpiphp_set_hpp_values() to use the
generic pci_configure_slot() rather than the acpiphp-specific
decode_hpp() and program_hpp().

Unlike the previous acpiphp-specific code, pci_configure_slot()
programs PCI Express devices with Type 2 (PCI Express) settings
if provided by an _HPX method.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Reviewed-by: Alex Chiang <achiang@xxxxxx>
---
 drivers/pci/hotplug/acpiphp_glue.c |   81 +-----------------------------------
 1 files changed, 2 insertions(+), 79 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 71c3e16..050f1af 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -274,29 +274,6 @@ static int detect_ejectable_slots(struct pci_bus *pbus)
 	return found;
 }
 
-
-/* decode ACPI 2.0 _HPP hot plug parameters */
-static void decode_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
-{
-	int ret;
-
-	ret = acpi_get_hp_params(dev, hpp);
-	if (ret || !hpp->t0 || (hpp->t0->revision > 1)) {
-		/* use default numbers */
-		printk(KERN_WARNING
-		       "%s: Could not get hotplug parameters. Use defaults\n",
-		       __func__);
-		hpp->t0 = &hpp->type0_data;
-		hpp->t0->revision = 0;
-		hpp->t0->cache_line_size = 0x10;
-		hpp->t0->latency_timer = 0x40;
-		hpp->t0->enable_serr = 0;
-		hpp->t0->enable_perr = 0;
-	}
-}
-
-
-
 /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */
 static void init_bridge_misc(struct acpiphp_bridge *bridge)
 {
@@ -1290,66 +1267,12 @@ static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 	return retval;
 }
 
-static void program_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
-{
-	u16 pci_cmd, pci_bctl;
-	struct pci_dev *cdev;
-
-	/* Program hpp values for this device */
-	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
-			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
-			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
-		return;
-
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
-		return;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-			hpp->t0->cache_line_size);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER,
-			hpp->t0->latency_timer);
-	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
-	if (hpp->t0->enable_serr)
-		pci_cmd |= PCI_COMMAND_SERR;
-	else
-		pci_cmd &= ~PCI_COMMAND_SERR;
-	if (hpp->t0->enable_perr)
-		pci_cmd |= PCI_COMMAND_PARITY;
-	else
-		pci_cmd &= ~PCI_COMMAND_PARITY;
-	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
-
-	/* Program bridge control value and child devices */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
-				hpp->t0->latency_timer);
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
-		if (hpp->t0->enable_serr)
-			pci_bctl |= PCI_BRIDGE_CTL_SERR;
-		else
-			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
-		if (hpp->t0->enable_perr)
-			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
-		else
-			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
-		if (dev->subordinate) {
-			list_for_each_entry(cdev, &dev->subordinate->devices,
-					bus_list)
-				program_hpp(cdev, hpp);
-		}
-	}
-}
-
 static void acpiphp_set_hpp_values(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
-	struct hotplug_params hpp;
 
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		decode_hpp(dev, &hpp);
-		program_hpp(dev, &hpp);
-	}
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		pci_configure_slot(dev);
 }
 
 /*

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux