[PATCH 4/8] PCI hotplug: add pci_configure_slot()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds a new pci_configure_slot() function that programs the
PCI bus characteristics for a newly-added device.  This is based on
code in pciehp_pci.c, but this should be generic enough to be used by
pciehp, shpchp, and acpiphp.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Reviewed-by: Alex Chiang <achiang@xxxxxx>
---
 drivers/pci/hotplug/Makefile     |    2 
 drivers/pci/hotplug/pcihp_slot.c |  181 ++++++++++++++++++++++++++++++++++++++
 include/linux/pci_hotplug.h      |    4 +
 3 files changed, 186 insertions(+), 1 deletions(-)
 create mode 100644 drivers/pci/hotplug/pcihp_slot.c

diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 2aa117c..3625b09 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_HOTPLUG_PCI_SGI)		+= sgi_hotplug.o
 # Link this last so it doesn't claim devices that have a real hotplug driver
 obj-$(CONFIG_HOTPLUG_PCI_FAKE)		+= fakephp.o
 
-pci_hotplug-objs	:=	pci_hotplug_core.o
+pci_hotplug-objs	:=	pci_hotplug_core.o pcihp_slot.o
 
 ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\
diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c
new file mode 100644
index 0000000..82d4698
--- /dev/null
+++ b/drivers/pci/hotplug/pcihp_slot.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@xxxxxxxxx)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ * (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
+
+static struct hpp_type0 pci_default_type0 = {
+	.revision = 1,
+	.cache_line_size = 8,
+	.latency_timer = 0x40,
+	.enable_serr = 0,
+	.enable_perr = 0,
+};
+
+static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
+{
+	u16 pci_cmd, pci_bctl;
+
+	if (hpp->revision > 1) {
+		dev_warn(&dev->dev,
+			 "PCI setting record rev %d not supported\n",
+			 hpp->revision);
+		return;
+	}
+
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
+	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+	if (hpp->enable_serr)
+		pci_cmd |= PCI_COMMAND_SERR;
+	else
+		pci_cmd &= ~PCI_COMMAND_SERR;
+	if (hpp->enable_perr)
+		pci_cmd |= PCI_COMMAND_PARITY;
+	else
+		pci_cmd &= ~PCI_COMMAND_PARITY;
+	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+	/* Program bridge control value */
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+				      hpp->latency_timer);
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+		if (hpp->enable_serr)
+			pci_bctl |= PCI_BRIDGE_CTL_SERR;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+		if (hpp->enable_perr)
+			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+	}
+}
+
+static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
+{
+	int pos;
+	u16 reg16;
+	u32 reg32;
+
+	if (hpp->revision > 1) {
+		dev_warn(&dev->dev,
+			 "PCI Express setting record rev %d not supported\n",
+			 hpp->revision);
+		return;
+	}
+
+	/* Find PCI Express capability */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!pos)
+		return;
+
+	/* Initialize Device Control Register */
+	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
+	reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
+
+	/* Initialize Link Control Register */
+	if (dev->subordinate) {
+		pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
+		reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
+			| hpp->pci_exp_lnkctl_or;
+		pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
+	}
+
+	/* Find Advanced Error Reporting Enhanced Capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return;
+
+	/* Initialize Uncorrectable Error Mask Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
+	reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
+
+	/* Initialize Uncorrectable Error Severity Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
+	reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
+
+	/* Initialize Correctable Error Mask Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
+	reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
+
+	/* Initialize Advanced Error Capabilities and Control Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
+	reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+	/*
+	 * FIXME: The following two registers are not supported yet.
+	 *
+	 *   o Secondary Uncorrectable Error Severity Register
+	 *   o Secondary Uncorrectable Error Mask Register
+	 */
+}
+
+void pci_configure_slot(struct pci_dev *dev)
+{
+	struct pci_dev *cdev;
+	struct hotplug_params hpp;
+	struct hpp_type0 *type0 = NULL;
+	int ret;
+
+	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+		return;
+
+	memset(&hpp, 0, sizeof(hpp));
+	ret = acpi_get_hp_params(dev, &hpp);
+	if (ret == 0 && hpp.t0)
+		type0 = hpp.t0;
+	else {
+		if (!dev->is_pcie) {
+			type0 = &pci_default_type0;
+			dev_warn(&dev->dev,
+				 "no PCI setting record; using defaults\n");
+		}
+	}
+
+	if (dev->is_pcie && hpp.t2)
+		program_hpp_type2(dev, hpp.t2);
+
+	if (hpp.t1)
+		dev_info(&dev->dev,
+			 "PCI-X setting record not supported\n");
+
+	if (type0)
+		program_hpp_type0(dev, type0);
+
+	if (dev->subordinate) {
+		list_for_each_entry(cdev, &dev->subordinate->devices,
+				    bus_list)
+			pci_configure_slot(cdev);
+	}
+}
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 0f3e1db..8cff1d5 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -230,6 +230,10 @@ int acpi_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
 int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
 int acpi_pci_detect_ejectable(struct pci_bus *pbus);
+#else
+#define acpi_get_hp_params(dev, hpp)	(-ENODEV)
 #endif
+
+void pci_configure_slot(struct pci_dev *dev);
 #endif
 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux